• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.978-983
• /
• 2009

This paper analyzed longitudinal end effect occurred in linear induction motor by using I-d direct solution and its result is verified by 2-d Finite Element Method(FEM). Longitudinal end effect of linear induction motor caused by magnetic discontinuity in primary core and electric discontinuity in armature winding has been investigated by many researchers. In this paper, 1-d direct solution and boundary conditions proposed by Yamamura and Nasar is used to analyze end effect of linear induction motor and its solution is verified by 2-d FEM.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.840-847
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene (m-LLDPE)/linear low density polyethylene (LLDPE) blends were investigated. The effect of blending on the induction time for crystallization, spherulites growth rate, and maximum size of spherulites was mainly considered in this study. The formation of separate crystal which is well known crystallization behavior in LLDPE/LDPE blend was not found in m-LLDPE/LLDPE blends. The blending m-LLDPE to LLDPE caused the dramatic decrease in the induction time of m-LLDPE/LLDPE blends but it seems that the blend composition shows less effect on the induction time. Lower branching number in m-LLDPE resulted in the increasing of spherulites growth rate and the maximum size of spherulites is depend upon both the induction time and spherulites growth rate of LLDPE component affected by m-LLDPE.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.129-134
• /
• 2001

Winter bud explants from 15 individual angelica tree (Aralia elata) were cultured in vitro to find out optimal conditions for somatic embryo induction as well as plant regeneration. Calli are induced and grown on MS medium supplemented with 1.0 mg/L 2,4-D for 4 weeks and subcultured on a half-strength MS medium without phytohormones to induce somatic embryos. Inter-simple sequence repeat (I-SSR) markers were analyzed with total DNAs extracted from the trees. Genotype effects on somatic embryo induction were examined by cluster analysis. Callus induction rate varied from 58.5 to 100% among the genotypes. Somatic embryo induction rate also greatly varied from 0 to 100% among the genotypes. There was a significant difference in somatic embryo induction rate even among the individual trees that showed close genetic relationships each other. This suggested that somatic embryo induction rate in Aralia elata be influenced by a few major specific genes rather than whole genomic similarity among individual trees. Four individuals of Ulneong-7, Cheju-1, Shingu and China, which are recalcitrant to somatic embryo induction, turned out to have a close genetic relationship, suggesting that both physiological and genetic factors affect somatic embryo induction. The results suggest that genotype selection be the most important factor to achieve an efficient propagation, although cultural optimization through medium and explant manipulation may also play crucial roles in somatic embryogensis as well as plant regeneration of these species.

• Biomedical Science Letters
• /
• v.23 no.4
• /
• pp.339-347
• /
• 2017

This study was performed to evaluate the cytotoxicity induced by ischemia-like condition (ILC) in cultured neuroglial cells (C6 glioma cells). The protective effect of kaempferol (KAE), flavonoid against the cytotoxicity induced by ILC induction was assessed. In addition, antioxidative effects of KAE were done by colorimetric assays. Cell viability and the antioxidative effects such as DPPH-radical scavenging activity, superoxide dismutase (SOD)-like activity and inhibitory activity of lipid peroxidation (LP) were analyzed. ILC induction decreased cell viability in a dose-dependent manner, and the $XTT_{90}$ value (low cytotoxicity value) and $XTT_{50}$ value (high cytotoxicity value) were determined during ILC induction for 15 and 40 minutes, respectively. The butylated hydroxytoluene (BHT) antioxidant significantly increased cell viability damaged by the ILC-induced cytotoxicity. In the protective effect of KAE on ILC-induced cytotoxicity, KAE protected the ILC-induced cytotoxicity by the significant increase of cell viability, and also it showed DPPH-radical scavenging ability, SOD-like ability and inhibitory ability of LP. From these results, it is suggested that ILC induction showed cytotoxicity in these cultures and the oxidative stress is involved in the ILC-induced cytotoxicity. While, KAE prevented ILC-induced cytotoxicity by antioxidative effects. In conclusion, natural products like KAE may be a putative therapeutic agent for the treatment of disease associated with oxidative stress such as ischemia.

• 한국지구과학회:학술대회논문집
• /
• 2004.02a
• /
• pp.52-57
• /
• 2004

Korean Peninsula located between Japan and China where earthquakes frequently occur, have little geophysical observation despite its tectonic importance. This study suggests the inland conductive structures inferred from GDS data measured in Korean Peninsula and try to interpret induction arrows quantitatively with the aid of 2- and 3-D geomagnetic induction modeling. Ogcheon Belt (OCB) and Imjin River Belt (IRB) are regarded as main conductive structures in Korea Peninsula, the induction arrows for the period of 60 minutes show very weak anomaly due to sea effect, which is supported by the results of 3-modeling also. However, for the period of 10 minutes, induction arrows at YIN and ICHN show anomalous patterns considered as the effect of IRB in spite of sea effect. The results of 2-D modeling which simplify geological situations provide overall information on IRB

• Korean Journal of Microbiology
• /
• v.4 no.2
• /
• pp.1-4
• /
• 1966

As a part of studies of plant tumor induction, this experiment was prepared for the purpose of studying the ability of tumor induction and the tendency of tumor initiation in some Korean plants using the various Agrobacterium tumefaciens strains. Results obtained from this experiment are as follows. The virulences of five strains used in this experiment were gradually decreased in order of strain A6Kl, B6, 11BV7, T37 and 11 BNV6. Especially strain T37 which is known to the host limited strain showed virulent effect to the most of plants given for the materials as well as strain A6Kl, B 6 and 11BV7. Concerning the grade of tumor development, in plants which has tough stem, for example, Glycine max Meer, tumor induction was not well developed after the inoculation of all strains. Particullary in Ricinus communes Linne all strains showed virulent effect but tumor tissues were declined in relation to the development of lignification. It was also confirmed that the induction of tumor tissues on plants is to delay according to the increase of the age of host plants.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.128-134
• /
• 2007

Induction heating process includes magnetic and thermal situations. In order to analyze the induction heating, material properties depending on temperature are considered. In this paper, three dimensional analysis of induction heating process for moving inductor is analyzed using moving coordinate. The skin effect is confirmed inside the steel plate in the electro-magnetic analysis. The heat generation at the initial state is different from that at the quasi-stationary state. Therefore, material properties depending on temperature must be considered. The results of finite element analysis agree well with the experimental temperature results.

• Journal of Korea Foundry Society
• /
• v.19 no.5
• /
• pp.393-402
• /
• 1999

The reheating of the billet in the semi-solid state as quickly and homogeneously as possible is one of the most important aspects. From this point of view, an optimal design of the induction coil is necessary. The objective of inductive coil designsi a uniform induction heating over the length of the billet. The effect of coil length, diameter, the gap between coil surface and billet and axial position of the billet on temperature distribution of billet has been investigated. These design parameters have an important effectiveness on the electro-magnetic field. Therefore, in this study an optimal coil design to minimize electromagnetic ed effect will be proposed by defining the relationship between billet length and coil length. In particular, key point in induction heating process is focussed on optimizing the coil design with regard to the size of the heating billet and the frequency of induction heating system. After demonstrating the suitability of an optimal coil design through the FEM simulation of the induction heating process, the results of the coil design are also applied to the reheating process to obtain a fine globular microstructure. Its considered that the reheating conditions of aluminum alloys for thixoforging and a new CAE model of the induction heating process are very useful for thixoforging practitioners including induction heating ones.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.124-128
• /
• 1989

This experiment was conducted to determine factors affecting callus induction of Vernal alfalfa. Growth regulators, basal medium, medium pH, explant age, and agar concentration for callus induction were investigated. The results obtained were as follows: For the callus induction, 2-5 mg/l 2,4-D alone was found to be most effective on callus induction. Cytokinins did not have positive effect on the callus induction, and even the more cytokinin added induced the less callus. Callus yield was much higher in B5 or SH medium than in any other media. The calli induced in PC and MS media were more friable than those induced in other media. The medium pH of 5.8 gave the best response of callus induction. At higher than pH 7.0, callus induction was inhibited severely. The effective seedling age for callus induction was around 9 days. In agar concentration, 0.5 % (W/V) was suitable for callus induction and it was severely depressed at above 1 %. Callus induction was not influenced by day length or illumination. Calli cultured under 1618 hour lightldark cycle became more compact and green than those cultured under the dark.

• International Commerce and Information Review
• /
• v.9 no.4
• /
• pp.127-139
• /
• 2007

There are three methods to examine import structures : 1) look at import coefficient, 2) import dependency, and 3) composition ratio of imported products. Therefore, this study analyses the import structure of Korea using the three methods above and when final demand occurs on produced goods and services in each industrial section, it divides import induction coefficients that indicate size of induced import directly and indirectly into consumption, investment and export to identify the effect of export on import induction.