• Journal of Magnetics
• /
• 제6권2호
• /
• pp.73-76
• /
• 2001

A double rectangular spiral type inductor has been fabricated by using FeTaN films. The inductor is composed of internal coils sandwiched by magnetic layers. Characteristics of inductor performance are investigated with an emphasis on planarization of magnetic films. In the absence of the planarization process, the grating topology of the upper magnetic films over the coil arrays degrades the soft magnetic properties and the inductor performance. It also induces a longitudinal magnetic anisotropy with the easy axis aligned to the magnetic flux direction. This alignment prevents the upper magnetic films from contributing to the total induction. Glass bonding is a viable method for achieving a completely planar inductor structure. The planar inductor with glass bonding shows excellent performance: inductance of 1.1 $\mu H$, Q factor of 7 (at 5 MHz), and the current capability up to 100 mA.

• 센서학회지
• /
• 제16권1호
• /
• pp.17-23
• /
• 2007

This paper presents a miniaturized turn-counting sensor (TCS) where the geomagnetism and high-rpm rotation of ammunition are used to detect the turn number of ammunition for applications to small-caliber turn-counting fuzes. The TCS, composed of cores and a coil, has a robust structure with no moving part for increasing the shock survivability in the gunfire environments of ${\sim}30,000$ g's. The TCS is designed on the basis of the simulation results of an electromagnetic analysis tool, $Maxwell^{(R)}$3D. In experimental study, the static TCS test using a solenoid-coil apparatus and the dynamic TCS test (firing test) have been made. The presented TCS has shown that the induction voltage of $6.5{\;}mV_{P-P}$ is generated at the magnetic flux density of 0.05 mT and the rotational velocity of 30,000 rpm. From the measured signal, the TCS has shown the SNR of 44.0 dB, the nonlinearity of 0.59 % and the frequency-normalized sensitivity of $0.26{\pm}0.01{\;}V/T{\cdot}Hz$ in the temperature range of $-30{\sim}+43^{\circ}C$. Firing test has shown that the TCS can be used as a turn-counting sensor for small-caliber ammunition, verifying the shock survivability of TCS in high-g environments.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.161-168
• /
• 1998

Taguchi가 제안한 강건설계 및 연구자의 주관에 의존하는 통상적인 실험방법을 병 행하여 CH4/H2 유도결합 고밀도 플라즈마를 이용한 InP 소재의 반응성이온에칭에 있어 공 정변수들이 식각특성에 미치는 영향을 분석하고 적정조건을 도출하였다. 연구 결과 ICP전력 은 표면거칠기와 측벽수직도, bias 전력은 식각속도와 수직도에, CH4분율은 수직도와 식각 속도, 석영창과 시료 사이의 거리는 표면 거칠기에 영향을 주는 변수로 작용하였고, 식각속 도에 가장 크게 영향을 주는 변수는 공정압력임을 알 수 있었다. 결과적으로 ICP Power 700W, bias Power 150W, 시편/coil 거리 14cm, 압력 7.5mTorr, 15% $CH_4$의 적정조건에서 시간당 약 3.1$\mu\textrm{m}$의 식각속도와 미려한 표면을 얻어, 기존의 반응성 이온 식각(RIE)과 비교하 여 1.5배 이상의 식각속도를 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제28권1호
• /
• pp.76-79
• /
• 2017

본 논문에서는 저주파 자기유도방식의 소형 단말기 충전 기술에 적용되고 있는 상용 코일에 적용 가능한 연자성체 기반 차폐구조를 설계하였다. 연자성 재료는 높은 투자율과 낮은 자기손실 특성 등 강점이 있는데 반해, 낮은 절연 특성으로 와전류에 의한 전력 손실이 큰 단점이 있다. 본 연구에서는 연자성 재료에 격자형태의 패턴을 구현하여 와전류 경로를 줄임으로써 전력 손실을 개선하였으며, 외부로 누설되는 자기장 저감 효과를 가진 차폐구조를 제안하였다. Qi 표준인 WPC 상용 A10 코일을 위한 연자성체 기반 차폐구조를 설계하였으며, 제작 및 측정을 통해 본 논문에서 제안한 구조가 효과적으로 누설 자기장을 저감할 수 있음을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제46권10호
• /
• pp.57-62
• /
• 2009

본 논문은 방사선 피폭량을 실시간으로 산출하기 위해 무선전력 전송용 13.56MHz의 안테나 설계를 위한 안테나 회로의 최적화 및 수치적 해석을 연구하였다. 리더기(Reader)에서 테크(Tag)로 무선으로 전력을 전송하기 위해서 안테나 주파수 대역 중 13.56MHz는 유도 전류를 이용한 루프 안테나에 많이 이용하고 있다. 본 논문은 전자유도 방식의 원리를 이용해 안테나 LC 공진을 위한 수치적 계산을 통해 L과 C 값을 산출하여 실제 측정치와의 값과 비교하였다. 또한 안테나 회로의 최적화 튜닝 및 안테나 포트의 매칭을 위해 공진(Resonance)용 캐패시터를 가변하여 스코프로 안테나 코일으 양단의 전압이 최고시점을 관측하여 공진점을 찾아 보았다. 이러한 실험은 무선으로 전력을 공급 받을 수 있는 무선전력 전송 시스템에 응용되어 매우 유용하게 활용될 것으로 기대된다.

• Journal of Photoscience
• /
• 제12권1호
• /
• pp.1-9
• /
• 2005

The ubiquitin E3 ligase COP1 (Constitutive Photomorphogenesis 1) is a protein repressor of photomorphogenesis in Arabidopsisplants, and it found in various organisms, including animals. The COP1 protein regulates the stability of many of the light-signaling components that are involved in photomorphogenesis and in the developmental processes. To study the effect of COP1 on flowering in a short day plant, we have cloned a full-length of PnCOP1 (Pharbitis nil COP1) cDNA from Pharbitis nil Choisy cv. Violet, and we examined its transcript levels under various conditions. A full-length PnCOP1 cDNA consists of 2,280 bp nucleotidesthat contain 47 bp of 5'-UTR, 232 bp of 3'-UTR including the poly (A) tail, and 1,998 bp of the coding sequence. The deduced amino acid sequence contains 666 amino acids, giving it a theoretical molecular weight of 75 kD and a isolectric point of 6.2. The PnCOP1 contains three distinct domains, an N-terminal $Zn^2+$-binding RING-finger domain, a coiled-coil structure, and WD40 repeats at the C-terminal, implying that the protein plays a role in protein-protein interactions. The PnCOP1 transcript was detected in the cotyledon, hypocotyls and leaves, but not in root. The levels of the PnCOP1 transcript were reduced in leaves that were a farther distance away from the cotyledons. The expression level of the PnCOP1 gene was inhibited by light, while the expression was increased in the dark. During the floral inductive 16 hour-dark period for Pharbitis nil, the expression was increased and it reached its maximum at the 12th hour of the dark period. The levels of PnCOP1 mRNA were dramatically reduced upon light illumination. These results suggest that PnCOP1 may play an important function in the floral induction of Pharbitis nil.

• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.379-392
• /
• 2011

This paper presents a multi-functional system, consisting of a magnetorheological (MR) damper and an electromagnetic induction (EMI) device, and its applications in stay cables. The proposed system is capable of offering multiple functions: (1) mitigating excessive vibrations of cables, (2) estimating cable tension, and (3) harvesting energy for wireless sensors used health monitoring of cable-stayed bridges. In the proposed system, the EMI device, consisting of permanent magnets and a solenoid coil, can converts vibration energy into electrical energy (i.e., induced emf); hence, it acts as an energy harvesting system. Moreover, the cable tension can be estimated by using the emf signals obtained from the EMI device. In addition, the MR damper, whose damping property is controlled by the harvested energy from the EMI device, can effectively reduce excessive cable vibrations. In this study, the multi-functionality of the proposed system is experimentally evaluated by conducting a shaking table test as well as a full-scale stay cable in a laboratory setting. In the shaking table experiment, the energy harvesting capability of the EMI device for wireless sensor nodes is investigated. The performance on the cable tension estimation and the vibration mitigation are evaluated using the full-scale cable test setup. The test results show that the proposed system can sufficiently generate and store the electricity for operating a wireless sensor node twice per day, significantly alleviate vibration of a stay cable (by providing about 20% larger damping compared to the passive optimal case), and estimate the cable tension accurately within a 2.5% error.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.65-68
• /
• 2008

Generally CCM (cold crucible melting) is not suitable for melting glass. However, in this study we described the quantitative relationship between the basic property of glass and power balance, the power absorption in the melt, the losses in the coil and the cold crucible, for melting glass in CCM. The dependence of power balance on the applied frequency and the electric conductivity has been found. Above 300 kHz, the glass (B) contained alkali ion which has the low resistance $3.0{\Omega}{\cdot}cm$ at $900^{\circ}C$ and $1.36{\Omega}{\cdot}cm$ at $1,100^{\circ}C$ was melted easily and 60% of the overall power was absorbed in the melt and 30% and 10% of the overall power was lost in the cold crucible and coil respectively. Under the same condition, the glass (A) contained non-alkali ion was not melted easily and 50% of the overall power was absorbed in the melt and 40% and 10% of the overall power was lost in the cold crucible and coil respectively. In conclusion, the small absorbed power of the overall power in melt prevented a successful melting as for glass A, and the successful melting depends on the relative size of the absorbed power in melt irrespective of the melting volume. Hence, as typical for direct induction heating method(CCM), the successful melting strongly depended on the chosen working frequency based on electric conductivity of glass, power balance and the control of the critical power which was absorbed in melt.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.566-572
• /
• 2020

무선 전력전송기에서 두 유도 코일 사이의 무선 전력전송 특성과 영향에 대해서 알아보고, 무선 전력전송 기술을 이용한 전력변환기 회로와 배터리 충·방전기 회로를 제안한다. 무선 전력전송기 및 무선 충전기의 장점은 기존의 플러그인 탑재형 유선 충전기(OBC; on-board charger) 대신 무선으로 전력을 전송하여 배터리에 전력 충전 시 사용자가 외부에서 전원을 연결 시키지 않고 무선으로 충전할 수 있는 점이다. 또한 무선충전의 이점은 2차 측 정류기의 회로와 수신 코일을 사용하여 에너지 효율 향상 효과를 가져올 수 있으나, 대용량의 원거리 무선충전 방식은 전송거리에 대한 한계가 있어 현재 많은 연구가 진행되고 있다. 비 접촉 방식의 전력 전송기의 전력을 전송 할 수 있는 송신부 인 1차측 코일과 수신부인 2차측 코일 및 하프브리지(half bridge) 직렬공진 컨버터를 적용한 무선 전력전송장치의 송신부 회로와 수신부 회로의 연구를 목적으로 무선충전시스템의 전력전송거리 향상을 위한 새로운 토폴로지를 적용하고, 각각의 거리에 따른 실험을 통해 8 cm 전송거리에서 출력 3 kW 일 때, 최대 효율(95.8%)을 확인 할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.120-125
• /
• 2014

Conventional handheld metal detectors use a single induction coil to detect the metallic parts of explosive objects, and the detector generates an acoustic signal from its magnetic response to a metallic object so that an operator can confirm the existence of mines. Though metal detectors have very useful detection mechanisms to find mines, it is easy to cause a high false alarm ratio due to the detection of non-explosive metallic items such as cans, nails and other pieces of metal, etc. Also, because of the physical characteristic of a metal detector it is hard to detect non-metallic objects such as mines made of wood or plastic. Furthermore, the operator must move it to the left and right slowly and repeatedly to attain enough sensor signals to confirm the existence of mines using only a monotonous acoustic signal. To resolve the disadvantages of handheld detectors, many new approaches have been attempted, such as an arrayed detector and a visualization algorithm based on metal/non-metal sensor. In this paper, we introduce a visualization algorithm with a metal/non-metal complex sensor, an arrayed metal/non-metal sensor and the their testing and evaluation.