• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.676-680
• /
• 2003

Dissolution of magnetite powders by 0.05 M citric acid was investigated at $50^{\circ}C$. All the tests were performed in the pH range between 2.0 to 5.0, which was adjusted using nitric acid or sodium hydroxide. Concentration of each of the dissociated chemical species of citric acid under various solution pHs was calculated using the ionization constants. Variation of zeta potential of magnetite with pH changes was also investigated. The dissolution reaction was explained by comparing the concentration of the dissociated chemical species of citric acid with the zeta potential. Longer than 3 h of induction time was required to dissolve the magnetite. The dissolution behaviour of magnetite was well described by the equation. The physical meaning of each parameter was explained successfully from the model equation.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.224-234
• /
• 2008

Multi-phase machines can be used in variable speed drives. Their applications include electric ship propulsion, 'more-electric aircraft' and traction applications, electric vehicles, and hybrid electric vehicles. Multi-phase machines enable independent control of a few numbers of machines that are connected in series in a particular manner with their supply being fed from a single voltage source inverter(VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases more than or equal to five-phase. The number of series-connected machines is a function of the phase number of VSI. Theoretical and simulation studies have already been reported for number of multi-phase multi-motor drive configurations of series-connection type. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information concerning the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an MRAS estimator based sensorless control of a vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed-voltage, fixed-frequency supply, and hysteresis current control are presented for various operating conditions on the basis of simulation results. The purpose of this paper is to report the first ever simulation results on a sensorless control of a five-phase two-motor series-connected drive system. The operating principle is given followed by a description of the sensorless technique.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.72-80
• /
• 2009

When the magnet wheel rotates over a conducting plate, it generates the traction torque as well as the repulsive force on the conducting plate. Partially-cut traction torque results in the linear force into the tangential direction. To cut the traction torque, the concept of magnetic shield is introduced. The direction change of the linear force is realized varying the shielded area of magnetic field. That is, the tangential direction of non-shielded open area becomes the direction of the linear thrust force. Specially a shape of permanent magnets composing the magnet wheel leads to various pattern of magnetic forces. So, to enlarge the resulting force density and compensate its servo property a few simulations are performed under various conditions such as repeated pattern, pole number, radial width of permanent magnets, including shape of open area. The theoretical model of the magnet wheel is derived using air-gap field analysis of linear induction motor, compared with test result and the sensitivity analysis for its parameter change is performed using common tool; MAXWELL. Using two-axial wheel set-up, the tracking motion is tested for a copper plate with its normal motion constrained and its result is given. In conclusion, it is estimated that the magnet wheel using partial shield can be applied to a noncontact conveyance of the conducting plate.

• Journal of Distribution Research
• /
• v.15 no.1
• /
• pp.25-47
• /
• 2010

CS is one of the major concerns of managers in the world because it is well known to be a key medium construct for firms' superior outcome. One of the major agents for CS management is retailers. Firms try to manage not only employees but also retailers to promote CS behaviors. And so diverse incentives are used to promote their CS behaviors under diverse channel setting such as multi-channel. However in spite of the rising needs there has been scarce studies on the optimal incentive structure for a manufacturer to offer competing retailers at the multi-channel. In this paper, we try to find better way for a manufacturer to promote the competing retailers' CS behaviors. We investigated how to promote the retailers' CS behavior via game-theoretic modeling. Especially, we focus on the possible incentive, CS bonus type reward introduced in the studies of Hauser, Simester, and Wernerfelt(1994) and Chu and Desai(1995). We build up a multi stage complete information game and derive a subgame perfect equilibrium using backward induction. Stages of the game are as following. (Stage 1) Manufacturer sets wholesale price(w) and CS bonus($\eta$). (Stage 2) Both retailers in competition set CS effort level($e_i$) and retail price($p_i$) simultaneously. (Stage 3) Consumers make purchasing decisions based on the manufacturer's initial reputation and retailers' CS efforts.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.533-539
• /
• 2010

Stem cell-based therapy is under intensive investigation to treat acute renal failure (ARF). The purpose of this study was to evaluate available ARF models, and suggest a model appropriate to therapeutic evaluation of the stem cells in preclinical approach by determining the optimum concentration of nephrotoxic agents and duration of ischemia induction. Three different types of available acute kidney injury (AKI) animal models were analyzed using rats: Cisplatin (saline, 5 and 7.5 mg/kg, IP) or glycerol (saline, 8 and 10 ml/kg, IM)-induced nephrotoxicity as toxic models and ischemia-induced (sham, 35 and 45 minutes) nephropathy as an ischemic model. The relevance and applicability to investigate especially the regenerative ability of stem cells were evaluated regarding morphology, renal function and survival at this time point. In the point of renal function, 10 ml glycerol/kg and 7.5 mg cisplatin/kg model in toxic models and 45 min model in ischemia models showed significant decrease for the longer observation time compared to 8 ml glycerol/kg, 5 mg cisplatin/kg and the 35 min ischemia models, respectively. All groups were observed no mortality except 45 min-ischemia model with 50% survival. Histological significant alterations including cast formation in the tubular lumen, tubular necrosis and apoptosis were revealed on the second day in either ischemiaor glycerol-induced models, and on day 5 in cisplatin-induced models. The results indicate that ischemia 35 min-, cisplatin 7.5 mg/kg- and glycerol 10 ml/kg-induced AKI would be ideal animal models to monitor a outcome parameter related to the therapeutic effects on renal function with noninvasive techniques in the same animal at multiple time points. Our findings also suggest that the best time points for the functional or histological interpretation of renal will be on day 2 in both glycerol- and ischemia-induced AKI models and on day 5 in cisplatin-induced AKI.