• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.331-337
• /
• 1994

저항띠의 양끝에서 0( /square)으로 변하는 저항율을 가진 저항띠의 적자구조에 비스듬히 입사하는 E분극 평면파에 의한 전자파 산람눙제를 과수영역에서 모멘트 법을 이용하여 해석하였따. 이때 저항띠에 유도되는 전류일도는 2종 Chebyshev 다항식의 급수로 전개하였다 전개계수들은 과수영역에서 수치계산하였고, 본 논문에서의 변하는 저항율을 갖는 경우와 기존의 균일 저항율을 갖는 경우에 대해 기하광학적 반사계수의 수치계산 결과를 비교하였다. 그리고 기하광학적 반사계수의 크기에서 급변점들이 위치는 입사각과 스트립 주기를 변화시킴으로써 이동시킬 수 있었다. 이러한 급변점들은 전파모드와 감쇠모드 사이서 고차모드가 천이될 때 발생함을 알 수 있었다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.131-136
• /
• 2006

Most modern railways, especially the high speed railway tracks, use continuous welded rail(CWR) for the less maintenance. For the CWR track has very few expansion joints, track buckling has always been an unpredictable event and it happens mainly by high compressive stress in rail in summer period. Therefore, it is important to understand the variation of rail stress induced by thermal loads which has direct influence on the rail buckling and stability of railway track. This paper describes the experimental investigation of the variation of rail temperature and stress in a high speed railway track on bridge structure. Field measurement was performed to examine the correlation between the rail temperature and rail stress on the Korean High Speed Railway line. Regression functions were derived from measured data to determine the rail stress f3r an arbitrary rail temperature varies from 20 to 50 degree Celsius.

• 농업과학연구
• /
• 제37권3호
• /
• pp.373-376
• /
• 2010

Peppermint (Mentha piperita L.) belongs to a member of the mint family (Lamiaceae) and is widely used in food, cosmetics and medicines. This study was carried to investigate the variation of essential oil content and its composition during callus subculture of M. piperita. For callus induction from the leaf explant of peppermint, the basal medium was supplemented with various concentrations of 2, 4-D. The best callus induction rate (93%) of M. piperita. was obtained in MS medium containing 2 mg/l 2, 4-D. The induced peppermint callus maintained on Lin-Staba medium were studied during a period of 20th subcultures for the stability of essential oil production. Growth rates of peppermint callus increased during prolonged subculture. However, there was a progressive decrease of essential oil content and unstability of monoterpene productions when callus cultures were serially subcultured.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.1040-1047
• /
• 2006

Bridges are exposed to constantly changing weather conditions and temperature. The temperature change is induced by a change in atmospheric temperature and solar radiation. Atmospheric temperature change acts on the whole structure. Thus, it is relatively easy to consider in the design. Solar radiation, however, causes un-uniform temperature distribution in the structure, depending on the shape of the structure and its shadows. Un-uniform temperature distribution causes a torsional moment in bridge section and a deformation of bridge. A deformation can make differences of dynamic and static behavior of bridge. In this study, the method for analysis of static and dynamic behavior considering deformation and changes of material properties due to temperature variation was developed. By this method, it is found from dynamic analysis results that the change of frequency in analysis model is similar with test results of public used cable-stayed bridge. When a temperature goes down, a frequency goes up. And it is found that the change of frequency is affected by the change of material properties.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.70-75
• /
• 2000

The weld seam tracking system for arc welding process uses various kinds of sensors such as arc sensor, vision sensor, laser displacement and so on. Among the variety of sensors available, electro-magnetic sensor is one of the most useful methods especially in sheet metal butt-joint arc welding, primarily because it is hardly affected by the intense arc light and fume generated during the welding process, and also by the surface condition of weldments. In this study, a dual-electromagnetic sensor, which utilizes the induced current variation in the sensing coil due to the eddy current variation of the metal near the sensor, was developed for arc welding of sheet metal butt-joints. The dual-electromagnetic sensor thus detects the offset displacement of weld line from the center of sensor head even though there's no clearance in the joint. A set of design variables of the sensor were determined for the maximum sensing capability through the repeated experiments. Seam tracking is performed by correcting the position of sensor to the amount of offset displacement every sampling period. From the experimental results, the developed sensor showed the excellent capability of weld seam detection when the sensor to workpiece distance is near less than 5 mm, and it was revealed that the system has excellent seam tracking ability for the butt-joint of sheet metal.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권2호
• /
• pp.149-153
• /
• 2002

Induction of non-diapause eggs and manifestation of quantitative characters were studied in different seasons by low temperature incubation of eggs of a low yielding diapause with coloured cocoons silkworm breed, RDI of Bombyx mori. Hundred percent of nandiapause eggs were induced when the egg incubation was carried out at 15$^{\circ}C$ followed by incubation initially at $25^{\circ}C$ and then at $15^{\circ}C$. The diapause-nondia-pause relation was found to be reversible. Analysis of variance study demonstrated significant variation in all the quantitative characters whereas significant variation due to different incubation treatments was observed for larval span, fifth instar larval span, cocoon yield/10,000 larvae by weight, cocoon weight, cocoon shell weight, and cocoon shell ratio. study on hybrid vigour skewed significant heterosis over mid parent value for four economic characters viz., cocoon weight, cocoon shell weight, cocoon shell ratio and filament length in a Fl hybrid between RD1 with diapause eggs and Japanese type bivoltine $NB_{4} D_{2}$.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.122-126
• /
• 2006

This paper presents experimental and numerical investigation on heat generation of a bulk HTS for application to a 100 kWh Superconductor Flywheel Energy Storage System(SFES) bearing. An experimental device is manufactured to reproduce varying magnetic field conditions that a bulk HTS may experience during the operation of the 100 kWh SFES. The bulk HTS is directly cooled by a cryocooler while the heat is generated by the eddy currents created by varying magnetic fields induced by a coil. In order to design the cryocooling system for the 100 kWh SFES project, a preliminary experiment to investigate the actual cooling load variation under AC magnetic field has been carried out. In the experiment, two different copper holders were designed and tested. Several temperature sensors were installed on each component of the assembly and the temperatures were measured for several operating conditions of the 100 kWh SFES. The experimental investigation on the thermal response of the bulk HTS and its holder is considered to be a valuable step fur the successful materialization of a large-scale SFES.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.63-66
• /
• 2005

Nanoimprint lithography (NIL) process at room temperature has been newly proposed in recent years to overcome the shape accuracy and sticking problem induced in a conventional NIL process. Success of the room temperature NIL relies on the accurate understand of the mechanical behavior of the polymer. Since a conventional NIL process has to heat a polymer above the glass transition temperature to deform the physical shape of the polymer with a mold pattern, viscoelastic property of polymer have major effect on the NIL process. However, rate dependent behavior of polymer is important in the room temperature NIL process because a mold with engraved patterns is rapidly pressed onto a substrate coated with the polymer by the hydraulic equipment. In this paper, finite element analysis of the room temperature NIL process is performed with considering the strain rate dependent behavior of the polymer. The analyses with the variation of imprinting speed and imprinting pattern are carried out in order to investigate the effect of such process parameters on the room temperature NIL process. The analyses results show that the deformed shape and imprint force is quite different with the variation of punch speed because the dynamic behavior of the polymer is considered with the rate dependent plasticity model. The results provide a guideline for the determination of process conditions in the room temperature NIL process.

• 한국측량학회지
• /
• 제30권6_2호
• /
• pp.673-680
• /
• 2012

Long-term GPS data analysis was performed in order to analyze the seasonal variation of tropospheric delay and the success rate of the ambiguity resolution. For this analysis, a total of 57 stations including 10 IGS stations in East Asia were processed together with double-differenced observables using Bernese GPS Software V5.0. The time span for this study ranges from 2002.0 to 2012.5 (10.5 years). The average baseline length is 339.0 km and the maximum reaches up to 2,000 km. The analysis is focused on two things: the annual variation of the tropospheric delay and the ambiguity resolution rate. The tropospheric delay is closely related to the weather condition, especially relative humidity, therefore it was estimated that the maximum would be in summer, while reaching its minimum in winter with the apparent seasonal variations. On the contrary, however, the success rate of the ambiguity resolution shows the opposite pattern: its maximum was in winter and minimum in summer. The fact seems to be induced by the surrounding conditions; that is, the trees thick with leaves near the GPS antenna interfere with GPS signals in summer. This seems to confirm partly that there is a distinct trend in the decreasing success rate since 2006 because the trees are growing every year. It is necessary to eliminate the factors that degrade the GPS quality and the tropospheric modeling for Korea needs to be studied further.

• 말소리와 음성과학
• /
• 제3권3호
• /
• pp.77-88
• /
• 2011

Foreign accent in second language production depends heavily on the transfer of features from the first language. This study examines acoustic variations in segments and suprasegments by native and nonnative speakers of English, searching for patterns of the transfer and plausible indexes of foreign accent in English. The acoustic variations are analyzed with recorded read speech by 20 native English speakers and 50 Korean learners of English, in terms of vowel formants, vowel duration, and syllabic variation induced by stress. The results show that the acoustic measurements of vowel formants and vowel and syllable durations display difference between native speakers and nonnative speakers. The difference is robust in the production of lax vowels, diphthongs, and stressed syllables, namely the English-specific features. L1 transfer on L2 specification is found both at the segmental levels and at the suprasegmental levels. The transfer levels measured as groups and individuals further show a continuum of divergence from the native-like target. Overall, the eldest group, students who are in the graduate schools, shows more native-like patterns, suggesting weaker foreign accent in English, whereas the high school students tend to involve larger deviation from the native speakers' patterns. Individual results show interdependence between segmental transfer and prosodic transfer, and correlation with self-reported proficiency levels. Additionally, experience factors in English such as length of English study and length of residence in English speaking countries are further discussed as factors to explain the acoustic variation.