• 제목/요약/키워드: Induced earthquake

검색결과 379건 처리시간 0.025초

고주파수 근사해를 적용한 유체저장탱크에 작용하는 지진하중 산정 (High Frequency Approximation for Earthquake-Induced Hydrodynamic Loads in Rigid Stroage Tank)

  • 류정선;양우식
    • 한국지진공학회논문집
    • /
    • 제3권2호
    • /
    • pp.1-8
    • /
    • 1999
  • 지진의 수평지반운동으로 인해 유체저장탱크에 작용하는 수평하중의 산정에 있어서 유체수심에 대한 탱크저면길이의 비율에 따라 유용하게 사용할 수 있는 근사해법에 대하여 연구하였다 본 연구는 탱크벽체를 강체로 가정하고 구한 속도포텐셜이론을 적용하여 탱크의 지진하중을 산정한다. 유체저장탱크의 수평단면이 연직으로 일정하지만 그 형상은 원형, 직사각형, 불규칙형인 경우로 나누어 해석하였다 우선 주기적 지반운동(조화가진)에 대한 해를 구하고 이를 바탕으로 랜덤지진에 대한 시간영역해를 구하도록 한다. 예제해석결과 지진력은 적용하는 설계응답스펙트럼의 특성 탱크단면형, 수심에 대한 저면길이의 비율등에 따라 차이가 다소있으나 주로 고주파수 유효질량의 관성력이 지배적인 것으로 나타났다. 대체적으로 수심에 대하여 탱크저면길이가 상당히 크거나 작은 경우는 고주파수근사해를 써서 지진력을 효율적으로 산정할 수 있었다.

  • PDF

Parametric study on earthquake induced pounding between adjacent buildings

  • Naserkhaki, Sadegh;Abdul Aziz, Farah N.A.;Pourmohammad, Hassan
    • Structural Engineering and Mechanics
    • /
    • 제43권4호
    • /
    • pp.503-526
    • /
    • 2012
  • Pounding between closely located adjacent buildings is a serious issue of dense cities in the earthquake prone areas. Seismic responses of adjacent buildings subjected to earthquake induced pounding are numerically studied in this paper. The adjacent buildings are modeled as the lumped mass shear buildings subjected to earthquake acceleration and the pounding forces are modeled as the Kelvin contact force model. The Kelvin model is activated when the separation gap is closed and the buildings pound together. Characteristics of the Kelvin model are extensively explored and a new procedure is proposed to determine its stiffness. The developed model is solved numerically and a SDOF pounding case as well as a MDOF pounding case of multistory adjacent buildings are elaborated and discussed. Effects of different separation gaps, building heights and earthquake excitations on the seismic responses of adjacent buildings are obtained. Results show that the seismic responses of adjacent buildings are affected negatively by the pounding. More stories pound together and pounding is more intense if the separation gap is smaller. When the height of buildings differs significantly, the taller building is almost unaffected while the shorter building is affected detrimentally. Finally, the buildings should be analyzed case by case considering the potential earthquake excitation in the area.

지진에 의한 산사태 위험도 평가방안에 관한 연구 (A Study on Risk Assessment Method for Earthquake-Induced Landslides)

  • 서준표;유송;이기환;이창우;우충식
    • 한국재난정보학회 논문집
    • /
    • 제17권4호
    • /
    • pp.694-709
    • /
    • 2021
  • 연구목적: 지진에 의한 산사태 위험도 평가를 통하여 지진발생 전에는 산사태 예방사업, 지진발생 후에는 피해지 예측 및 복구 우선순위 선정으로 지진유발 산사태 피해저감을 효율적·선제적으로 하기 위한 기초자료를 제공하고자 수행하였다. 연구방법: 국외 선행연구를 분석하여 평가 방법론 검토와 평가 인자를 도출하고 국내 산사태 위험지도 활용성을 검토하였다. 또한 지진동 감쇠식을 이용하여 포항지역의 단층대 및 진앙지 기준으로 지진에 의한 산사태 위험지도를 시범 구축하였다. 연구결과: 지진에 의한 산사태 위험도 평가 연구는 중국이 전체의 44%, 이탈리아 16%, 미국 15%, 일본 10%, 대만 8% 순으로 나타났다. 평가 방법론으로 통계적 모형이 59%로 가장 많았고, 물리적 모형이 23%로 나타났다. 통계적 모형에 많이 사용된 인자는 고도, 단층대와의 거리, 경사도, 사면방향, 모암, 지형곡률로 나타났다. 현재 국내의 산사태 위험지도는 지형·지질·임상이 반영되는데 이를 활용한 지진에 의한 산사태 위험도 평가는 합리적인 것으로 나타났다. 포항지역에 단층대 및 진앙지 기준으로 산사태 위험도를 평가한 결과 기존의 낮은 등급이 높은 등급으로 변화하는 등 지진의 영향이 고려되었다. 결론: 광역 단위의 지진유발 산사태 위험도 평가를 위해서는 산사태 위험지도를 활용하는 것이 효율적이다. 단층대 기준의 위험지도는 지진에 의한 산사태 피해방지를 위한 예방사방사업 대상지 선정에 활용하고, 진앙지 기준의 위험지도는 지진이 발생한 이후 산사태 피해 현황을 조사하거나 피해지 복구 등 피해방지 대책 우선순위 선정의 효율적 사후관리에 활용할 수 있다.

전달함수를 이용한 펌프(50Hp)의 진동가진력 산정 (Estimation of Pump Induced Vibration Force Using Transfer Function)

  • 노병철
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
    • /
    • pp.157-162
    • /
    • 1998
  • Dynamic loads may arise from rotating parte of pump if they are insufficiently balanced. The magnitude of pump induced vibrations varies according to the weight, eccentricity, and unbalanced mass of pump. This is a study to estimate the pump induced vibration in time and frequency domain by transfer function. The transfer function has real and imaginary information of signals, and response function has also real and imaginary information. So the vibration force can be obtained from the response and transfer function by complex calculation. The amplitudes and components of 50Hp pump vibration force are suggested.

  • PDF

발파에 의한 화강암반의 손상평가 (Evaluating Blasting Induced Damages of Granite)

  • 목영진
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.85-92
    • /
    • 1999
  • Blasting induced damage boundary was determined by measuring vibrations adjacent to charging holes. the criterion adopted to define damages is that blasting-induced strains exceeding tension-crack strain level cause damages. The blasting vibrations were measured in terms of acceleration and converted to strains. The tension-crack strain level was determined with tensile strengths and elastic moduli of rock cores. The damage zone was found to be extended radially about 1 meter from the blasthole detonated with 250 to 700 grams of explosives. The comparison of shear wave velocity profiles before and after blasting shows that the damage boundary of 1 meter seems to be reliable.

  • PDF

지진으로 인한 액상화 지역 및 시설물 안정성 평가 (Earthquake-induced Liquefaction Areas and Safety Assessment of Facilities)

  • 전상수;허대양;이상승
    • 한국산학기술학회논문지
    • /
    • 제19권7호
    • /
    • pp.133-143
    • /
    • 2018
  • 액상화는 지진이후 동반되는 2차 피해로서 국내의 경우 현대적 지진 관측이 실시된 이후에는 액상화 현상이 거의 보고되지 않았다. 그러나 최근 한반도 남동부에 위치한 양산단층 인근에서 2016년 9월 12일 규모 5.8의 경주지진과 2017년 11월 15일 규모 5.4의 포항 지진이 발생하였고, 포항 지진 당시 최초로 액상화 현상이 발생하여 한반도 또한 액상화의 안전지대가 아닌 것으로 나타났다. 본 연구에서는 낙동강과 인접해 있으며 양산단층이 통과하는 김해시의 액상화 위험성을 예측하기 위하여 김해시 지역의 표준관입시험(274공) 결과를 바탕으로 각 행정구역과 양산단층과의 거리 산정, 지진규모 5.0, 6.5에 따른 최대지반가속도 값을 도출, 액상화 가능지수 산출, 지리정보체계를 이용한 크리깅의 순차적 연산을 통하여 액상화로 인한 시설물 피해 평가를 실시하였다. 그 결과, 지진 규모 5.0 적용 시 김해시 액상화 발생 지역과 시설물 피해는 미미한 것으로 나타났으나 지진 규모 6.5 적용 시 낙동강 일대에 근접한 행정구역에 액상화 현상이 넓게 분포하였고, 시설물 피해도 상대적으로 크게 발생하는 것으로 나타났다.

충격 추진력 변화를 이용한 지진 P파 자동 검출 알고리즘 (Automatic Seismic P-wave Detection Algorithm Using Variations of Impact Momentum)

  • 최훈
    • 전기학회논문지
    • /
    • 제67권7호
    • /
    • pp.884-891
    • /
    • 2018
  • In this paper, we propose an automatic earthquake P-wave detection algorithm based on the variations of the impact momentum derived from the seismic acceleration signals. The amount of change in the impact momentum induced by the acceleration refers to the influence of buildings or facilities on the earthquake, The proposed algorithm can effectively detect the seismic P-wave by simultaneously considering the amplitude and the frequency change of the seismic wave when the earthquake occurs. Computer simulations using the observed seismic signals were performed to evaluate the validity of the induced impact momentum variation and the superiority of the proposed algorithm.

Earthquake stresses and effective damping in concrete gravity dams

  • Akpinar, Ugur;Binici, Baris;Arici, Yalin
    • Earthquakes and Structures
    • /
    • 제6권3호
    • /
    • pp.251-266
    • /
    • 2014
  • Dynamic analyses for a suite of ground of motions were conducted on concrete gravity dam sections to examine the earthquake induced stresses and effective damping. For this purpose, frequency domain methods that rigorously incorporate dam-reservoir-foundation interaction and time domain methods with approximate hydrodynamic foundation interaction effects were employed. The maximum principal tensile stresses and their distribution at the dam base, which are important parameters for concrete dam design, were obtained using the frequency domain approach. Prediction equations were proposed for these stresses and their distribution at the dam base. Comparisons of the stress results obtained using frequency and time domain methods revealed that the dam height and ratio of modulus of elasticity of foundation rock to concrete are significant parameters that may influence earthquake induced stresses. A new effective damping prediction equation was proposed in order to estimate earthquake stresses accurately with the approximate time domain approach.

한국과 일본에서의 액상화 판정방법 비교 (The Comparison for Liquefaction Judgement used in Korea and Japan)

  • 송병웅
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.1206-1213
    • /
    • 2009
  • Earthquake had occurred in the Korean Peninsula about 2,100 times is not well known in the world. With the true liquefaction judgment is well used to in Korea. Through liquefaction judgements were compared with specifications between Korea and Japan, it would be offered some suggestions for liquefaction judgement used in Korea. The proposals were as 1) It can be known that what kind of earthquake will make unstable state between long-term and short-term earthquake if the natural period of ground turned out. In that case, Hachinohe and Ofunato Earthquake wave will need no more. 2) Liquefaction-induced lateral flow or damage for structure should be estimate but it had not performed in Korea. 3) Heavy rain and ocean wave-induced liquefaction also should be examined thoroughly in slope or ocean, respectively.

  • PDF

지진하중을 받는 정사각형 강재 액체저장탱크의 벽면 압력 응답 해석 (Earthquake-Induced Wall Pressure Response Analysis of a Square Steel Liquid Storage Tank)

  • 윤장혁;강태원;양현익;전종수
    • 한국지진공학회논문집
    • /
    • 제22권5호
    • /
    • pp.261-269
    • /
    • 2018
  • This study examines earthquake-induced sloshing effects on liquid storage tanks using computation fluid dynamics. To achieve this goal, this study selects an existing square steel tank tested by Seismic Simulation Test Center at Pusan National University as a case study. The model validation was firstly performed through the comparison of shaking table test data and simulated results for the water tank subjected to a harmonic excitation. For a realistic estimation of the wall pressure response of the water tank, three recorded earthquakes with similar peak ground acceleration are applied:1940 El Centro earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake. Wall pressures monitored during the dynamic analyses are examined and compared for different earthquake motions and monitoring points, using power spectrum density. Finally, the maximum dynamic pressure for three earthquakes is compared with the design pressure calculated from a seismic design code. Results indicated that the maximum pressure from the El Centro earthquake exceeds the design pressure although its peak ground acceleration is less than 0.4 g, which is the design acceleration. On the other hand, the maximum pressure due to two Korean earthquakes does not reach the design pressure. Thus, engineers should not consider only the peak ground acceleration when determining the design pressure of water tanks.