• Journal of Life Science
• /
• v.27 no.5
• /
• pp.591-599
• /
• 2017

It is well established that endurance performance is negatively affected by environmental heat stress. Numerous scientific investigations have attempted to improve performance in the heat with pre-cooling and per-cooling for endurance athletes. Some cooling strategies are more logistically challenging than others, and thus are often impractical for use in training or competition. The purpose of this study was to review the literature on the use of cooling interventions in the improvement of performance and recovery from exercise-induced heat stress. We undertook an examination that focused on the effects of pre-cooling and per-cooling on the improvement in endurance performance and the effects of post-exercise cooling on recovery. The benefits for pre-cooling and per-cooling strategies undertaken in the laboratory setting could be employed by athletes who compete in hot environmental conditions to improve performance. Most laboratory studies have shown improvements in endurance performance following pre-cooling and per-cooling, and in recovery following post-cooling. Cooling strategies such as cooling vest, neck cooling collar, menthol and ice slurry are practically relevant to sports field. Cooling interventions that can be applied frequently to reduce thermal strain prior to, during and directly after training appear to be the best effective strategy to improve performance and recovery. Future research is warranted to investigate the effectiveness of practical pre-cooling and per-cooling strategies in competition or field settings.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.77-83
• /
• 2012

Recently, excavations using propped walls were popularized in downtown due to reduced settlement of nearby structures. These excavations is induced strain to propped walls or settlement in near ground. In this study, the ground reinforcing effect was proven using NDS, which is an inorganic injection material. Injection tests were performed to compute optimum injection pressure and volume. Next, calibration chamber tests were performed by using computed injection pressure and volume, and wall behaviour was examined for overburden pressures of 50kPa and 150kPa. Ground reinforcing effect was shown when the material behind the propped wall was grouted. From test results, optimum injection pressure was 350kPa and the optimum volume was 10L considering economics. Calibration chamber test results show that after the material was grouted, the maximum settlement was reduced to 19% of the non-grouted condition. For overburden pressures of 50kPa and 150kPa behind the wall, the settlement of the wall increased by 58% and 57% when compared to the case of no overburden pressure.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.88-103
• /
• 2008

This study was purposed to investigate the effects of surfactants and fillers on physical properties of hydrophilic polyvinylsiloxane dental impression materials (PVS). Incorporation of surfactants enhanced the hydrophilicity of the PVS, however, it induced increased viscosity and permanent deformation ratio, delayed setting, and decreased tensile strength. At high concentrations of surfactant, the tensile strength was observed to decrease significantly due to the internal pore formation. Especially, the hydrophilicity of the PVS was significantly enhanced with the addition of Silwet L-77. However, the viscosity, strain in compression, pore formation, and setting time increased whereas the elastic recovery rate and strength remarkably decreased. The PVS dental materials containing Span 20 showed the lowest degree of viscosity increase, delayed setting, pore formation, and hydrophilicity. The delayed setting, pore formation, and strength decrease caused by the incorporation of surfactant were improved by substituting the crystalline quartz filler with diatomaceous earth while the contact angle of PVS dental materials increased.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.214-220
• /
• 2004

This study was carried out to determine the antioxidative, antimutagenic, and anticancer effects of functional food manufactured from fermented soybean(FFMFS) using DPPH free radical donating method, Ames test and cytotoxicity, respectively. FFMFS extracted with ethanol and then further fractionated to n-hexane, chloroform, ethyl acetate(EtOAc), butanol and water, stepwise. Among five fractions, the EtOAc fractions showed highest electron donating activities (31.6 $\mu\textrm{g}$/mL). The inhibition rate of ethanol extract(200 $\mu\textrm{g}$/plate) of FFMFS in the S. typhimurium TA100 strain showed 84.8% against the mutagenesis induced by MNNG. In addition, the suppression of EtOAc fractions with same concentration of FFMFS the S. typhimurium TA98 and TA100 strains showed 88.7% and 92.8% inhibition against Trp-P-l, respectively. The cytotoxic effects of FFMFS against the cell lines with human lung carcinoma(A549), human gastric carcinoma(AGS) and human breast adenocarcinoma(MCF-7) were inhibited with the increase of the extract concentration. The treatment of 1.0 mg/mL FFMFS of EtOAc fraction showed strong cytotoxicities of 84.5%, 88.7% and 85.6% against A549, AGS and MCF-7, respectively.

• Korean Journal of Veterinary Research
• /
• v.46 no.3
• /
• pp.215-224
• /
• 2006

In order to search the availability of the lectin extracted from Korean mistletoe(Viscum album coloratum) as an adjuvant for the avian vaccines, attempts were made to determine toxicity of the lectin in chicks and its immunostimulating activity on the inactivated vaccines against Newcastle disease virus(NDV). For the determination of toxicity, the lectin was injected into the thigh muscle of SPF chicks(Charles River) of 1-week-old and observed hematologically and pathologically. For the determination of immunostimulating effects, lectin-adjuvanted, inactivated NDV vaccines were injected into the thigh muscle of SPF chicks in the same age group. Sera of the chicks were examined for the hemagglutination-inhibition(HI) antibodies induced, their HI titers and reaction to the NDV antigens. The data were further compared with those from aluminum hydroxide [$Al(OH)_3$]-adjuvanted vaccines and vaccines without adjuvant, and the results are as follows. There were no significant changes observed in the values of RBC, WBC, Hb, PCV, MCV, MCH, MCHC, AST, ALT, BUN, creatinine and total proteins in the chicks administered with lectin of 1.1, 2.2 and $22.2{\mu}g/kg$ body weight, which means the lectin has no effects on blood values and functions of liver and kidney. In histopathologic observation, no lesions were observed in the brain, heart, liver, lung, spleen, kidney, thymus and bursa of Fabricius of the chicks administered with lectin of 1.1, 2.2 and $22.2{\mu}g/kg$ body weight. There were inflammatory lesions, such as congestion, hemorrhage, edema, infiltration of macrophages and coagulation necrosis observed in the thigh muscle of chicks administered with lectin of $22.2{\mu}g/kg$ body weight, whereas no changes were observed in 1.1 and $22.2{\mu}g/kg$ lectin administered chicks. In chicks immunized with lectin($4.4{\mu}g/kg$ of body weight)-adjuvanted B1, LaSota and Ulster 2C vaccines, HI titers in reciprocal values for $log_2$ were 1.8-2.2 at 1 week after vaccination, which was similar with those of 1.5-2.9 by $Al(OH)_3$-adjuvanted vaccines. The HI titers by the lectin-adjuvanted vaccines reached to 3.9-5.3 at 4 weeks, whereas those by the $Al(OH)_3$-adjuvanted vaccines were more high as 7.3-9.3. Meanwhile, the immunostimulating effects of the lectin were recognized while compared to the HI titers with 2.4-3.7 in chicks immunized with vaccines without adjuvants at 4 weeks after vaccination. The chicks immunized with lectin-adjuvanted vaccines were enough to resist challenges by Kyojeongwon strain, a very virulent NDV at 4 weeks after vaccination as well as chicks immunized with $Al(OH)_3$-adjuvanted vaccines. The HI titers by the lectin-adjuvanted vaccines reached to high level as 8.7-10.3 as those with 8.2-9.6 by the $Al(OH)_3$-adjuvanted vaccines at 6 weeks after vaccination, which may be the booster effects by the challenge virus. Antibodies specific to the HN and F antigens of NDV were observed in the sera of both chicks immunized with lectin-adjuvanted vaccines and $Al(OH)_3$-adjuvanted vaccines.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1115-1120
• /
• 1998

The sliding wear behavior of Ni-base hardfacing alloy, Deloro 50, was investigated at the contact stresses of 15ksi and 30ksi under the various wear environments. In air at room temperature, Deloro 50 showed lower wear resistance than Stellite 6 even at 15ksi due to the occurrence of severe adhesive wear. This seems to be caused by the lower hardness and work- hardening rate of Deloro 50 than those of Stellite 6. In water at room temperature, Deloro 50 showed as good wear resistance as Stellite 6 at 15ksi. It was considered to be due to that water could effectively prevent metal to metal contact through contacting asperities. However, Deloro 50 showed severe adhesive wear at 30ksi in water at room temperature. It seems to be that the water could not suppress adhesion wear at 30ksi. At $300^{\circ}C$ in air, Deloro 50 exhibited higher wear resistance than Stellite 6 even at 30ksi. It was considered that the oxide glaze layers formed on wear surface during sliding, effectively prevented direct metal-to-metal contacts.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.204-210
• /
• 2002

The quality characteristics and sensory evaluation of chungkookjang were investigated. The samples were prepared and fermented by the inoculation of Bacillus strains; B. subtilis, B. natto and B. licheniformis as a single starter, and mixed culture of B. natto and B. licheniformis on the industrialized model system. It was shown that microbial growth, protease activity, contents of amino-and ammonia-nitrogen and contents of organic acid were higher in B. subtilis inoculated sample, and were lower in B. licheniformis inoculated one. General quality characteristics of sample inoculated by mixed culture of B. natto and B. licheniformis took a middle position between each B. natto and B. licheniformis inoculated one. Fifty eight species of odor components were identified. Ethanol, 3-methyl-1-butanol, acetic acid, benzaldehyde and alkyl pyrazines were identified in all samples and most of other flavor components were strain specific. The contents of unpleasant smell components, alkyl pyrazines and benzaldehyde, were lower in B. licheniformis inoculated sample. The sensory evaluations showed that chungkookjang manufactured from mixed culture of B. natto and B.licheniformis was most acceptable. Therefore, results indicated that chungkookjang manufactured from mixed culture of B. natto and B. licheniformis induced better sensory quality than that of the control.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.211-216
• /
• 2003

This study was carried out to determine the antioxidative, antimutagenic, and anticancer effects of Rhodiola sachalinensis root using 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical donating method, Ames test and cytotoxicity, respectively. Rhodiola sachalinenis root were extracted with ethanol and then further fractionated to n-hexane, chloroform, ethyl acetate (EtOAc), butanol and water, stepwise. Among five fractions, the Etohc fractions showed the highest electron donating activities (14.3 $\mu$g/mL). The inhibition rate of ethanol extract (200$\mu$g/plate) of Rhodiola sachalinensis root in the S. typhimurium TA100 strain showed 89.1% inhibition against the mutagenesis induced by MNNG. In addition, the suppression of EtOAc fractions with same concentration of Rhodiola sachalinensis root in the S. typhimurium TA98 and TAI00 strains showed 89.7% and 91.5% inhibition against 4NQO, respectively. The suppressions under the same condition against B($\alpha$)P and Trp-P-1 in the TA98 and TA100 strains were 94.2% and 95.7%, and 92.3% and 93.8%, respectively. The cytotoxic effects of Rhodiola sachalinensis root against the cell lines with human lung carcinoma (A549), human hepatocellular carcinoma (HepG2), human gastric carcinoma (AGS) and human breast adenocarcinoma (MCF-7) were inhibited with the increase of the extract concentration. The treatment of 1.0 mg/mL Rhodiola sachalinensis root of EtOAc fraction showed strong cytotoxicities of 90.5%, 81.5%, 92.2% and 82.6% against A549, HepG2, AGS and MCF-7, respectively.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.270-280
• /
• 2014

In this study, to examine the causes of cracks in continuously reinforced concrete tracks (CRCTs) and the main factors affecting cracking, a field survey on the status of cracks and crack patterns in the Gyeong-bu high speed line was conducted, and the crack patterns of CRCT due to the temperature difference between the top of the slab (TCL) and the bottom of the subbase (HSB) and the drying shrinkage of concrete were predicted by a nonlinear finite element model considering the structure of CRCT. The results of the numerical analysis show that cracks will be developed at the interface between the sleeper and the TCL, and under the sleeper due to the temperature difference and concrete shrinkage. This corresponds well to the crack locations found in the field. Also, it is found that the most significant factors are the coefficient of thermal expansion with respect to the temperature difference, and the drying shrinkage strain with respect to shrinkage. According to the results, the reinforcement ratio should be carefully determined considering the structures of CRCT because the crack spacing is not always proportional to the reinforcement ratio due to the sleepers embedded in the TCL.