• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.2051-2056
• /
• 2014

함정의 탈자결과 평가를 위한 자계신호의 분리방법에 대한 이론적 근거와 해저 면에 설치되는 사각코일로부터 발생하는 불균일한 자계가 분리결과에 미치는 영향을 측정 신호와 FEM해석을 통해 검토하였다. 측정신호는 제작된 모델함에서 발생하는 자계를 자계센서로 측정한 것이며 FEM 계산은 제작된 모델함과 동일한 형상으로 수행되었다. ILM(induced longitudinal magnetization) 신호와 IVM(induced vertical magnetization) 신호는 함정이 가지는 투자율과 지자계의 수평과 수직방향 성분에 의해 각각 발생하는 자화에 의한 것이며, PLM(permanent longitudinal magnetization) 신호와 PVM(permanent vertical magnetization) 신호는 함정의 영구자화의 수평성분과 수직성분에 의한 것임이 확인되었다. 또한 사각 코일의 수직방향의 자계는 균일한 지자계를 완전히 상쇄할 수 없어 사각코일의 면적에 가까운 크기를 가지는 함정 일수록 사각코일의 자계 불균일성의 영향을 크게 받게 됨을 알았다.

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.104-107
• /
• 2009

The effects of the magnetic property variation on current-induced magnetization switching in magnetic tunnel junction with perpendicular magnetic anistoropy (PMA) and the soft magnetic polarization-enhancement layers (PELs) inserted between the layers with PMA and the MgO layer was studied. A micromatnetic model was used to estimate the switching time of the free layer by different applied current densities, with changing saturation magnetization ($M_s$) of the PELs, interlayer exchange coupling between PMA layers and PELs. The switching time could be significantly reduced at low current densities, by increasing $M_s$ of PELs and decreasing interlayer exchange coupling.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1412-1417
• /
• 2007

Magnetic anomaly generated around a ship is mainly due to the permanent magnetization(PM) and induced magnetization (IM) remaining on the hull. It is very difficult to predict the direction and its magnitude of the permanent magnetization distributed over the hull, that is caused by mechanical or thermal stress. In this paper, an effective method is proposed to separate two components, the one produced by PM and the other by IM, from the underwater earth field signal distorted by the ferromagnetic material of the ship. The method can easily provide the two kinds of magnetic anomaly through exploiting experimental results and 3D electromagnetic field analyses even though the PM distribution on the hull is not known. To validate the proposed method, a model ship is manufactured and tested. The results would be of much help to basis research for securing safe navigation of a ship against dangerous factors in underwater.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.847-852
• /
• 2007

This paper investigates the characteristics of cogging torque and magnetic force of a brushless DC (BLDC) motor due to imperfect magnetization of permanent magnet (PM) numerically and experimentally which results in the magnetically induced vibration. A predicted magnetization pattern of the PM of the BLDC motor, which is derived from the measured surface magnetic flux density along the PM, is applied to the finite element analysis in order to calculate the cogging torque and the unbalanced magnetic force. This research also develops the experimental setup to measure the unbalanced magnetic force as well as the cogging torque. It shows numerically and experimentally that the imperfect magnetization of permanent magnet generates the driving frequencies of cogging torque with integer multiple of slot number in addition to the least common multiple of pole and slot. It also shows that the driving frequencies of unbalanced magnetic force are integer multiple of slot number ${\pm}1$ due to imperfect magnetization of PM even in the rotationally symmetric design.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.62-68
• /
• 2015

This paper presents an experimental technique to accurately separate a permanent magnetic field and an induced one from the total magnetic fields generated by a steel ship, through compensating for the Earth's magnetic field. To achieve this, an Earth's magnetic field simulator was constructed at a non-magnetic laboratory, and the field separation technique was developed, which consisted of five stages. The proposed method was tested with a scaled model ship, and its permanent and induced magnetic fields were successfully extracted from the magnetic field created by the ship. Finally, based on the separated permanent magnetic field data, the permanent magnetization distribution on the hull was predicted by solving an inverse problem. Accordingly, the permanent magnetic fields generated by the ship can easily be calculated at any depth of water.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.585-590
• /
• 2014

A permanent vertical magnetization should be obtained to counteract induced vertical magnetization due to the earth's background field during the Flash D demagnetization process. A vertical susceptibility is needed to calculate a extra-permanent magnetization, which is needed to control the permanent vertical magnetization in stage 2 of Flash D demagnetization and added to the final vertical permanent magnetization. Two susceptibilities were found in this paper. One is obtained from the extra-magnetization. The other is obtained by magnetic field measurement from the scaled physical vessel when the vessel is excited by vertical magnetic field. The initial susceptibility by the extra-magnetization was 0.101~0.109 and the one from the measured magnetic field was 0.122. Two susceptibilities have a good agreement each other. From this paper, it is found that the susceptibility is able to appllied to calculate the extr-magnetization.

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.48-51
• /
• 2005

The spin transfer induced magnetization switching has been reported to occur in magnetic multilayer structures whose scope usually consists of one stack of ferromagnetic / non-ferromagnetic / ferromagnetic (F / N / F) materials. In this work, it is shown that: 1) Copper used as a buffer layer between the free Co and the Au cap-layer can clearly increase the probability to get the spin transfer induced magnetization switching in a simple spin valve Co 11 / Cu 6/ Co 2 (nm); 2) Furthermore, when Ruthenium is simultaneously applied as a buffer layer on the Si-substrate, the critical switching currents can be reduced by $30\%$, and the absolute resistance change delta R $[{\Delta}R]$ of that stack can be enlarged by $35\%$. The enhancement of the spin transfer induced magnetization switching can be ascribed to a lower local stress in the thin Co layer caused by a better lattice match between Co and Cu and the smoothening effect of Ru on the thick Co layer.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.308-310
• /
• 2013

Translation induced by the field-gradient force is being observed for a single ferromagnetic iron grain and a ferrimagnetic grain of a ferrite sample ($CuFe_2O_4$). From measurements on the translation, precise saturated magnetization of $M_S$ is possible for a single grain. The method is based on the energy conservation rule assumed for the grain during its translation and the grain is translated through a diffuse area under microgravity conditions. The results of the two materials indicate that a field-induced translation of grain bearing spontaneous moment is generally determined by a field-induced potential $-mM_SH(x)$ where m denotes the mass of sample. According to the above translations, the detection of $M_S$ is not interfered by any signals from the sample holder. The $M_S$ measurement does not require m value. By observing translations resulting from fieldinduced volume forces, the magnetization of a single grain is measurable irrespective of its size; the principle is also applicable to measuring susceptibility of diamagnetic and paramagnetic materials.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.453-456
• /
• 2011

Demagnetization for a tube sample which was made of a galvanized steel sheet was performed by applying a magnetic field with a decrement to remove the remanent magnetization of the material. An orthogonal fluxgate magnetic field sensor was used to measure a magnetic field created from a ferromagnetic material. To evaluate the remanent magnetization, the measured magnetic fields were separated into two magnetic field components by the remnant magnetization and the induced one. The horizontal and the vertical bias fields should be controlled separately during demagnetization to remove the horizontal and the vertical components of the remanent magnetization of the tube sample.

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.58-62
• /
• 2005

Periodic magnetic nanodot arrays were successfully produced on glass substrates by interference laser lithography and electron beam lithography methods. Magnetic force microscopy (MFM) observation was carried out on fabricated nanodot arrays. MFM tip induced magnetization effects were clearly observed in ferromagnetic elliptical nanodots varying in material and aspect ratio. Fe-Cr dots with a high aspect ratio show reversible switching of the single domain magnetization state. At the same time, Co nanomagnets with a low aspect ratio exhibit tip induced transitions between the single domain and the vortex state of magnetization. The simple nanolithography is potentially an efficient method for fabrication of patterned magnetic arrays.