• 소음진동
• /
• 제7권4호
• /
• pp.621-629
• /
• 1997

For computer aided design and costruction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.452-459
• /
• 1997

For computer aided design and construction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.252-259
• /
• 2017

Nowadays, the existing manual method for recording actual progress of the construction site has some drawbacks, such as great reliance on the experience of professional engineers, work-intensive, time consuming and error prone. A method integrating computer vision and BIM(Building Information Modeling) is presented for indoor automatic progress monitoring. The developed method can accurately calculate the engineering quantity of target component in the time-lapse images. Firstly, sample images of on-site target are collected for training the classifier. After the construction images are identified by edge detection and classifier, a voting algorithm based on mathematical geometry and vector operation will divide the target contour. Then, according to the camera calibration principle, the image pixel coordinates are conversed into the real world Coordinate and the real coordinates would be corrected with the help of the geometric information in BIM model. Finally, the actual engineering quantity is calculated.

• 한국측량학회지
• /
• 제36권6호
• /
• pp.545-554
• /
• 2018

아날로그 지도에서 디지털 지도로의 지도 패러다임의 변화에 따라 공간정보의 세밀도 개념의 재정의가 필요하다. 이에, 본 연구에서는 디지털 지도 환경에서 활용될 수 있는 4차원 실내 세밀도 모델을 정의하였다. 이를 위하여 기존의 세밀도 개념의 한계점을 도출하고, 이를 기반으로 실내공간정보의 위치 정확도 기반의 위치 세밀도(PLOD: Position accuracy Level Of Detail), 형상 표현기반의 기하 세밀도(GLOD: Geometric Level Of Detail), 일반화 기반의 완성도 세밀도(CLOD: Complete Level Of Detail), 주제 정확도 기반의 의미 세밀도(SLOD: Semantic Level Of Detail)의 4가지의 다른 세밀도를 정의하였다. 또한, 본 연구에서 정의한 4가지의 서로다른 세밀도간의 유기적 관계에 대해 설명하고, 이를 통해 실내 공간정보의 세밀도를 4차원으로 표현하는 방법과 적용 방법 및 예시를 보였다. 향후, 본 연구에서 제시한 4차원의 실내공간 세밀도의 효용성과 타당성을 검증하기 위하여 다양한 실내 서비스를 위한 세밀도 적용 사례 연구와 지형지물 별 완성도 세밀도와 의미 세밀도를 적용하기 위한 연구가 수행되어야 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.2044-2059
• /
• 2022

Recent works have shown that the geometric constraint can be harnessed to boost the performance of CNN-based camera localization. However, the existing strategies are limited to imposing image-level constraint between pose pairs, which is weak and coarse-gained. In this paper, we introduce a pixel-level epipolar geometry constraint to vanilla localization framework without the ground-truth 3D information. Dubbed EpiLoc, our method establishes the geometric relationship between pixels in different images by utilizing the epipolar geometry thus forcing the network to regress more accurate poses. We also propose a variant called EpiSingle to cope with non-sequential training images, which can construct the epipolar geometry constraint based on a single image in a self-supervised manner. Extensive experiments on the public indoor 7Scenes and outdoor RobotCar datasets show that the proposed pixel-level constraint is valuable, and helps our EpiLoc achieve state-of-the-art results in the end-to-end camera localization task.

• 한국컴퓨터그래픽스학회논문지
• /
• 제21권5호
• /
• pp.37-44
• /
• 2015

본 논문에서는 전통적으로 삼차원 모델 복원에 사용되는 볼륨 기반 자료 구조의 한계점을 극복하기 위해 평면 해시 구조를 볼륨 구조와 상호보완적으로 사용하는 하이브리드 모델 표현을 제안한다. 실내 환경에 대한 삼차원 모델 복원은 좁은 공간에 대한 정밀한 복원 결과를 얻기 위해 볼륨 기반의 자료 구조를 사용하였으나, 이러한 볼륨 기반의 자료 구조는 메모리의 사용량이 많아 대규모 공간에 대한 삼차원 복원으로 확장이 용이하지 못하였다. 본 논문에서는 이러한 기존 삼차원 모델 복원의 확장성을 증가시키기 위해 메모리를 효율적으로 사용하는 평면 해시 모델 구조를 제안한다. 또한 이러한 제안된 평면 해시 모델 구조를 넓고 단순한 평면 복원을 위해 사요하고, 좁고 디테일한 공간 복원에는 기존 볼륨 구조를 동시에 사용하는 하이브리드 복원 방법을 사용한다. 제안된 기법은 GPU 상에서 구현되어 공간을 실시간으로 복원 가능하다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.157-160
• /
• 2010

Management of indoor air quality of underground subway station is an important issue since the limited natural ventilation, limited sunshine incoming, and highly moistured atmosphere. The improvement in IAQ of platform is expected because most stations were installed with platform screen door currently, however, the poor air quality in tunnel might be affecting subway cabin indoor. In this study, we developed the air quality assessment model based on computational fluid dynamics. The geometry of air ventilation unit, seat, LCD monitors, and passengers were modeled using commercial software (Design Modeler) and fluid pattern and pollutants trajectories were analyzed by using CFX. We predicted the thermal comfort by predicted mean vote (PMV), distribution of CO2 and PM10 concentration. It is expected that this model can be used for the performance test of air cleaners which are under development.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.93-96
• /
• 2004

A turbo-fan for the 4-way cassette indoor units of air-conditioners has been investigated. The main purpose of this investigation is the reduction of the turbo-fan noise. In order to reduce the noise level, many design parameters of turbo-fans such as blade section, blade thickness, geometry of blade leading edge, blade width, blade angle and bellmouth depth have been studied. With the experimental data of these parameters, a new turbo-fan was made for our system. The noise level of the new system was at least 3 dB(A) lower than that of the current in use.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.962-967
• /
• 2006

Indoor positioning is highlighted recently, and various kinds of indoor positioning systems are under developments. Since positioning systems have their own characteristics, proper positioning scheme should be chosen according to the required specifications. Positioning methods are classified into time-based and angle-based one. This paper presents the error analysis of time-based and angle-based location methods. Because measurements of these methods are nonlinear, linearizations are needed in both cases to estimate the user position. In the linearization, Gauss-Newton method is used in both cases. To analyze the position error, we investigate the error ellipse parameters that include eccentricity, rotation angle, and the size of ellipse. Simulation results show that the major axes of TOA and AOA method lie in different quadrants at most region of workspace, especially where the geometry is poor. When the TOA/AOA hybrid is employed, it is found that the error ellipse is reduced to the intersection of ellipses of TOA and AOA.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.948-951
• /
• 2008

Ubiquitous sensor network (USN) based on ZigBee communication protocol has been used in various application fields, such as home-network, intelligent building and machine, logistics, environmental monitoring, military field, security field and etc. The ZigBee is targeted at radio-frequency application that require a low data rate, long battery life and secure network. Especially, the USN system can be applied efficiently to building-indoor where the complex geometry is adopted. In this study, all 90 points of railway cabin indoor were monitored for temperature and humidity using USN technology. All sensors were pre/post-calibrated and the temperature/humidity change were analyzed in a railway cabin in real-time. The results would be useful to develop the cabin heating, ventilating and air conditing (HVAC) system to meet all passengers' thermal comfort regardless of their seat position.