• Prospectives of Industrial Chemistry
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2016

우리나라는 1970년대를 기점으로 하여 급격한 경제성장과 산업기술의 발전이 이루어졌다. 경제성장과 함께 주택의 보급 또한 급격하게 증가하게 되었고, 주택의 보급을 위한 건축자재 및 생활용품의 개발이 급속도로 이루어졌다. 이에 따라 실내에서 사용하는 기구 및 건축재료가 매우 다양해졌으며, 이로 인한 새로운 오염물질의 배출이 급격히 증가하게 되었다. 최근 새로운 기술로 소개되고 있는 촉매 산화법의 경우 제거하려는 대상 실내대기오염물질을 촉매를 이용하여 CO₂나 H₂O 등으로 산화시켜 제거하는 방법이며, 최근 많은 연구가 활발하게 수행되고 있다. 촉매를 이용하는 촉매 산화법은 광촉매 산화법과, 촉매의 성능만을 이용하여 대상물질을 산화하는 촉매산화법으로 구분된다. 광촉매 산화법은 특정 파장에서 반응하는 촉매에 자외선을 조사하여 실내오염물질을 산화제거하는 방법으로, 산화성능이 우수하여 여러 가지 실내오염가스에 적용되고 있으나, 별도의 광원이 필요하며, 포름알데히드 산화 시 CO₂와 H₂O 이외에도 dichloroacetyl chloride (C₂HCl₃O), trichloroethylene (C₂HCl₃), phosgene (COCl₂) 등과 같은 부수적인 2차 유해물질이 발생함에 따라 이를 처리하기 위한 대책이 수반되어야 한다. 반면, 촉매 산화법의 경우 별도의 광원이나 에너지원 없이, 촉매를 이용하여 대기오염물질을 인체에 무해한 물질로 완전 산화시키는 방법으로써, 최근 많은 연구가 수행되어 상온에서 구동 가능한 촉매가 개발되었고, 이의 연구가 활발히 이루어지고 있다. 이에 상온산화촉매기술의 연구동향 및 사례를 확인하고, 향후 상온산화촉매기술이 나아가야 할 방향을 제시하고자 한다. 본 연구는 환경부 환경산업선진화기술개발사업의 지원을 받아 수행되었습니다(2016000140004).

• Membrane Journal
• /
• v.27 no.4
• /
• pp.336-343
• /
• 2017

These days, the quality of indoor air is a very important concept for modern people who have lived in building and is a matter of new thinking. The quality is determined by the temperature and humidity of indoor air. In addition, there is a disadvantage in that energy consumption is severe for indoor air improvement. Therefore, researches on methods to solve such problems using total heat exchange have been actively conducted. So, in this study, aminated poly(styrene-ethylene-butylene-styrene) polymers were synthesized by introducing a hydrophilic substituent, ammonium, into main chain and the properties of synthesized polymers were evaluated. The synthesis was carried out through chloromethylation and amination reactions to introduce ammonium into main chain. As a result, the water uptake and the ion exchange capacity of the synthesized polymers increased as the content of the reaction reagent solution increased. It was confirmed that the important data at the total heat exchange membrane, water vapor transmission rate also increased according to temperature, equivalent.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2017

Outdoor design temperature is important for selecting proper capacity of heating and cooling systems of a building to implement indoor thermal comfort and save energy consumption. The purpose of this study is to investigate the change of South Korea outdoor design temperature according to the assigned period. When outdoor design temperature of 8 locations calculated with the latest weather data during 2008~2015 years using ASHRAE Bin method are compared to the standard temperature of Ministry of Land, Infrastructure and Transport which is widely used for designing South Korea air-conditioning system at present, the maximum temperature difference becomes $0.97^{\circ}C$ for cooling, and $1.94^{\circ}C$ for heating. Due to wide outdoor temperature variation, update of outdoor design temperature based on recent weather data is recommended.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1559-1566
• /
• 2012

This paper proposed the method to find out the optimal sensing point of temperature in test-bed with the sensor of temperature, such as real residence. We selected optimal locations by checking temperature change which was simulated by the means of CFD (Computational Fluid Dynamics) and the variation of air flow. We made 3-dimensional model of the testbed using DesignBuilder software, and ran the CFD. We selected the optimum temperature measurement location of 1.5 m height from the floor and low temperature variation. The experiments were conducted 30 temperature and humidity sensors in real place. After that, we confirmed the results of temperature change.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.49-58
• /
• 2006

In the respect of the environmental protection viewpoint, $CO_2$ may be one of the most attractive alternative refrigerants for an automotive air-conditioning system. For the development of control algorithm of a $CO_2$ automotive air-conditioning system, characteristics of a $CO_2$ refrigerant should be considered. The high-side pressure of a $CO_2$ system should be controlled in order to improve the system efficiency. In this study, dynamic physical models of a $CO_2$ system were developed and dynamic behaviors of the system were predicted by using these models. Control algorithms of a $CO_2$ system were also developed and the effectiveness of these algorithm was verified by using dynamic models.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2011

Due to enhanced sealing and insulation of buildings, extensive use of glasses for building envelopes and increased use of heat generating office equipments, energy consumption of modem buildings for cooling is steadily increasing. With outdoor air cooling(ODAC) system, cooling load can be reduced by exchanging indoor air with the cold outdoor air during spring and fall seasons. If ODAC is operated based only on temperature, total cooling load may virtually increase if the outdoor humidity is high. To overcome this problem, ODAC should be controlled based on enthalpy. In this work energy saving characteristics of enthalpy controlled ODAC is studied using dynamic simulation. The result shows that cooling load can be reduced by 27% by adopting ODAC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.10
• /
• pp.956-964
• /
• 2005

In order to control indoor air quality and save energy, it is needed to install a suitable ventilation system equipped with heat exchanger for heat recovery The purpose of this research is to find the factors affecting the performance of paper heat exchanger for exhaust heat recovery, which can be applied directly to the conventional ventilation unit, air-purifier, and air-conditioning system. In this study, thermal performance and pressure loss of the paper heat exchanger are measured and compared at various operating conditions. The effectiveness of sensible, latent and total heat at the face velocity of 0.75 m/s are $77\%,\;47\%\;and\;57\%$ in the cooling condition and $77\%,\;59\%,\;and\;\%$ in the heating condition, respectively. The effectiveness for sensible heat is only affected by velocity. On the other hand, the effectiveness for latent heat is affected. by temperature and relative humidity.

• The Journal of the Korea Contents Association
• /
• v.17 no.2
• /
• pp.327-336
• /
• 2017

People spend most of their time in the indoor environment. Among the various indoor environmental factors, air and thermal environment directly affect human's health and efficiency of work. Therefore, efficient monitoring of indoor environment is highly important. For assisting the residents to understand the state of the indoor environment much easier and more intuitive, this paper analyze the visualization cases of the conventional indoor environment. Then explore the direction of improvement for the visualization method to propose a more effective visualization method. The approach of web and BIM(Building Information Model)-based visualization of indoor environment proposed in this study is composed of four major parts: 1) the generation of the model data of the building; 2) the generation of indoor environmental data; 3) the creation of visualization elements; 4) data mapping. Then it realized through the generating process of visualization results.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.47-54
• /
• 2013

Two types of reactors were set to investigate the change of characteristics of pig slurry by aeration during fertilization period. One system was equipped with air diffuser to supply oxygen to pig slurry for liquid fertilization, but there was no air diffuser in the other system. Air supply to the experimental systems was regulated by air flow meter. The reactors were set up in the laboratory to protect the pig slurry from external condition such as temperature and humidity changes. Maintaining optimal pH range in the experimental reactors is an important factor for liquid fertilization of pig slurry. In this study, pH ranges of aerobic reactor and anoxic reactor was 7.04~7.19 and 7.34~7.81, respectively. The temperature of aerobic reactors was $2{\sim}3^{\circ}C$ higher then indoor temperature. The amount of sludge accumulated at the bottom layer of non-aerated reactors was 4~5 times more than that of aerated reactors.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.655-663
• /
• 2024

In order to meet the technological demand for indoor heating systems that ensure winter thermal comfort during the transition from internal combustion engines to electrification, a localized proximity heating module using surface heating elements was developed. The operational performance of heating module was tested in the low temperature chamber. The experiment conditions were varied by changing the chamber temperature (-10, 0℃), the air flow rate (6.2, 6.0, 4.2m³/h), the heater power (100, 80, 60, 40W). Thermal comfort model was confirmed using the CBE Thermal Comfort Tool applying ASHRAE standard 55. Under -10℃ condition, thermal comfort was satisfied at 23.4, 23.2℃ at power of 100W and air flow rate 6.0, 4.6m³/h. Under 0℃ condition, at power of 80W, air flow rate 6.2, 6.0m³/h, and at power of 60W, air flow rate 4.6m³/h showed results of 25.7, 26.1, 23.0℃, respectively, satisfying thermal comfort. This study analyzed the operating performance of the local proximity heating module in the low temperature chamber and applied thermal comfort model to prove applicability of local proximity heating module using surface heating elements and how to utilize the thermal comfort model.