• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.73-78
• /
• 2005

It was aimed to promote Cyrtomium falcatum as a material for interior landscape by validating it indoor adaptability in the indoor environment, especially irrigation times, soil treatment and drainage level. Irrigation times were 2 times per week and 7 times per week. Soil treatment and drainage level were carried out drainage-peatmoss : vermiculite : perlite=1 : 1 : 1(D-PVP), peatmoss : vermiculite : perlite=1 : 1 : 1(PVP), drainage-saprolite : leaf mold=1 : 1(D-SL) and saprolite : leaf mold=1 : 1(SL). 1. Top of growth was better with irrigation 7 times per week than irrigation 2 times per week but indoor adaptability was decreased and shown yellowish green. 2. In case of soil treatment, growth was better with saprolite : leaf mold=1 : 1 but indoor growth adaptability was decreased than peatmoss : vermiculite : perlite=1 : 1 : 1. 3. Plant height and blade length were increased under non-drainage treatment but indoor adaptability, number of new fronds and number of sporophyll were decreased under drainage treatment, regardless of irrigation times and soil treatment. 4. Photosynthetic rate(Pn) was the highest in the drainage-peatmoss : vermiculite : perlite=1 : 1 : 1 treatment of irrigation 2 times per week and was the lowest in the saprolite : leaf mold=1 : 1 treatment of irrigation 7 times per week.

• The Korean Journal of Community Living Science
• /
• v.17 no.2
• /
• pp.49-60
• /
• 2006

It was measured the energy expenditure in each season, the cold tolerance in winter and the heat tolerance in summer. Farmers' adaptability to the change of environment was compared with those of city-dwellers such as indoor workers and street cleaners to determine the effect of living environment, especially living temperature, on the health of human body. It turned out that farmers had experienced wide range of temperature that was higher in summer and lower in winter than indoor workers. Farmers and street cleaners showed seasonal adaptation in energy expenditure, which was high in winter and low in summer. However, indoor workers did not show seasonal changes. Energy expenditure had an inverse correlation with the temperature in work place where subjects spend the longer time in a day except in female indoor workers in Seoul. And It was proved that farmers and street cleaners had stronger cold tolerance and heat tolerance than indoor workers.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.744-751
• /
• 2018

This study aimed to provide the information on the thermal sensation and the amount of clothing worn of junior high school students in winter classroom the relation with their climate adaptability. Total usable questionnaires were obtained from 467 male and female students. The questionnaire included general characteristics, physical characteristics, self awareness of body shape, climate adaptability and subjective thermal sensation in winter classroom. The data were analyzed using SPSS Statistics 18.0 for frequency analysis, factor analysis, chi-square analysis, t-test and correlation analysis. The results were as follows. The average body type based on BMI was normal($20.1kg/m^2$ ). Females perceived their body type as thinner than males. They wore more (8.67 garment items compared to 8.14 for males). Only about 25% of students voted the thermal sensation to neutral(47% cool~very cold, 28% warm~very hot). Females were more sensitive to the cold, perceived less healthy, and wore more garments in the cold. Students felt colder in winter classroom when their cold adaptability was lower and they actively adjusted thermal insulation against the cold. It is recommended to suggest the guidelines for the proper indoor temperature and for the wear behavior in classroom in the perspectives of increasing the learning efficiency and improving the students' climate adaptability.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.103-108
• /
• 2005

It was aimed to promote as a material for interior landscape by validating Rumohra aristata, in an indoor environment, especially irrigation interval, medium composition and drainage at indoor. 1. The result of physico-chemical analysis of medium composition showed that porosity, pH and Ex-Ca, Ex-Mg and Ex-K were high with peatmoss: vermiculite: perlite(1:1:1) and water contents, organic matter content, total nitrogen and cation exchange capacity were high with sand: leaf mold(1:1). 2. Growth and indoor adaptability of Rumohra aristata were better with irrigation at 2 interval per week than irrigation at 7 interval per week regardless of drainage. 3. In the case of medium composition, of growth and indoor adaptability were higher with sud: leaf mold (1:1) than peatmoss: vermiculite: perlite(1:1:1). 4. Fronds fresh weight and dry weight decreased when irrigation interval increased and were higher with sand: leaf mold(1:1) than peatmoss: vermiculite: perlite(1:1:1) treatment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2009

This paper presents design concepts of a reconfigurable mobile robot for both of indoor and outdoor applications. A linkage mechanism and wheel-in-motors give the proposed mobile robot various driving modes in maneuver and good adaptability to irregular surface. Since the mobile robot receives multiple sensor signals from odometers and an orientation sensor, states related to the position and the orientation of the mobile robot are optimally estimated by an extended Kalman filter. Simulations and experimental results show that the performance of dead reckoning on estimating the pose of a mobile robot can be improved remarkably by the optimal state observer.

• The Journal of Korea Robotics Society
• /
• v.6 no.4
• /
• pp.334-343
• /
• 2011

This paper presents a new approach for mobile robot heading detection using MEMS Gyro north finding method in the indoor environment. Based on this, the robot heading angle measurement scheme is proposed; improved north finding theory and algorithm are also explained. Several approaches are applied to confirm system's precision and effectiveness. In order to find out the heading angle, a single axis MEMS gyroscope to sense the angle between the robot heading direction and the north is used. To reach enough estimation accuracy and reduce detection time, the least square method (LSM) for the signal fitting and parameter estimation is applied. Through a turn-table, we setup a carouseling system to decrease the substantial bias effect on gyroscope's heading angle. For the evaluation of the proposed method, this system is implemented to the Pioneer robot platform. The performance and heading error are analyzed after the test. From the simulation and experimental results, system's accuracy, usefulness and adaptability are shown.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.5
• /
• pp.269-277
• /
• 2017

This study consists of an analysis of pre-existing ceiling construction systems as well as the development of a replacement unitary, lightweight steel ceiling system and related legal standards. Based on the material conditions and progression of the study, appropriate components were chosen and details were modified by mock-up test. A final study model was evaluated for performance and adaptability based on four parameters (indoor environment, constructability, budget economy, and aesthetics) and compared to the pre-existing ceiling system. As a result of the initial study, a lightweight steel design was created consisting of a reinforced structure with modular bars and entry holes for components. This system was hung directly on the suspension structure. The new design increased lighting and acoustic performance adapted to an indoor environment. Moreover, the speed of construction was increased by approximately 30%, the cost was decreased by approximately 20%, and ceiling aesthetics were improved.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.6
• /
• pp.524-532
• /
• 2003

In this paper, a personal air-conditioning system considering the human thermal adaptability is analyzed. Although the conventional personal air-conditioner was proofed to be satisfactory in providing for the thermal comfort, it is being questioned on the term of its energy efficiency. Therefore, it is important and urgent to develop new types of personal air-conditioning system with sustainable control strategy that can ensure energy saving and thermal comfort simultaneously. In this study, we first examined the problems of the conventional personal air-conditioning system with field interview and laboratory experiment in terms of usage, management and thermal comfort, and proposed the energy-saving personal air-conditioning system considering the human thermal adaptation. Then a laboratory experiment was performed to analyze the characteristics of the human thermal comfort under severe indoor thermal conditions, which were controlled using a new personal air-conditioning unit designed according to the proposal. The results help to illustrate the alleviation effect of the new personal air-conditioning system, and indicate that the thermal alleviation time is useful to maintain the thermal comfort with efficient usage of energy.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.44-52
• /
• 2017

This paper is based on a study of the response characteristics of photoelectric type smoke detector chambers according to dust color. Due to an amendment to the Fire Safety Codes to automatic fire alarm systems and visual alarm device, the installation of indoor smoke detectors has become mandatory, but in Korea there is still insufficient research on the non-operation or false alarms that could arise in indoor environments by indoor dust and other environmental conditions etc. In light of this, for this study, research was conducted on the indoor adaptability of smoke detector under various colors of fiber dust that were judged to occur most frequently in among the common indoor dust, photoelectric smoke detector with the lattice-type smoke detection chamber that the smoke detector which is most popular in the country was used, and four colors of fiber dust (brown, white, gray and black) were used the test dusts for carrying out dust and sensitivity testing. Also, the voltage of the photocell part of the smoke chamber was measured, and the scattering phenomenon in the chamber was observed. The result of the testing showed that all four dust types were suitable for dust and sensitivity testing under conditions of pollution A. Yet, there were occasions, at pollution B or C, where the brown, white and gray dust would cause fail alarm during operation testing. And black dust was confirmed to cause non-operation during operation testing. In the case of brown and white dust, the voltage measurement result of the photocell part of the smoke chamber confirmed that the voltage increases as the pollution level increases, and in the case of gray and black dust, the voltage decreases.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.8
• /
• pp.627-635
• /
• 2012

This study aims at developing an artificial neural network(ANN)-based predictive and adaptive temperature control method to control the openings at internal and external skins, and heating systems used in a building with double skin envelope. Based on the predicted indoor temperature, the control logic determined opening conditions of air inlets and outlets, and the operation of the heating systems. The optimization process of the initial ANN model was conducted to determine the optimal structure and learning methods followed by the performance tests by the comparison with the actual data measured from the existing double skin envelope. The analysis proved the prediction accuracy and the adaptability of the ANN model in terms of Root Mean Square and Mean Square Errors. The analysis results implied that the proposed ANN-based temperature control logic had potentials to be applied for the temperature control in the double skin envelope buildings.