• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.151-159
• /
• 2010

This study was conducted to develop standards for evaluating what extant the physical environments of housing which can cope with the needs of the aging society. This study was consisted through literature investigation research mainly, and research target literature limits keyword to elderly housing environment and chose connected domestic various literatures. The study are as follows; First, in outdoor only area from design environment element accessibility, and safety emphasized from equipment element, health of community territory was expose from design'environment element that supportiveness is emphasized from equipment element. Second, in living room safety emphasized from design' environment element in bedroom and bathroom of indoor individuation space, vestibule, balcony supportiveness, health was expose that is emphasized kitchen and mess. Also, was expose that supportiveness is emphasized from equipment element of all individuation spaces. Third, was expose that design environment element in corridor that is indoor official business space, stair, lobby, elevator and safety from equipment element and supportiveness are emphasized.

• Journal of Environmental Health Sciences
• /
• v.42 no.1
• /
• pp.1-9
• /
• 2016

Objectives: Personal exposure to air pollution is affected by contact over time and by location. The purpose of this study was to determine the relationship between personal exposure to $PM_{2.5}$ and the time-activity patterns of the elderly in urban and rural areas. Methods: A total of 44 elderly participants were recruited for a 24-hour $PM_{2.5}$ personal exposure measurement. Twenty-four were from Seoul (urban area) and 20 were from Asan (rural area). Energy expenditure and spatiotemporal positioning were monitored through $PM_{2.5}$ measurement. Spearman correlation analysis was conducted to determine the relationship between $PM_{2.5}$ and time-activity pattern. Results: Daily average $PM_{2.5}$ personal exposures were $19.1{\pm}9.7{\mu}g/m^3$ in Seoul and $29.1{\pm}16.9{\mu}g/m^3$ in Asan. Although outdoor exposure was higher in Seoul than in Asan, residential indoor exposure was higher in Asan than in Seoul. Higher $PM_{2.5}$ personal exposure in Asan could be explained by longer time in residential indoor environments and higher indoor $PM_{2.5}$ concentrations. Seoul elderly had higher energy expenditure, which may be due to the use of mass transportation. Conclusion: Personal exposure to $PM_{2.5}$ was higher among Asan elderly than Seoul elderly because of high residential indoor concentrations and longer residential time. Lack of energy spent and higher personal exposure to $PM_{2.5}$ might have led to higher risk among the Asan elderly.

• International Journal of Contents
• /
• v.10 no.4
• /
• pp.69-74
• /
• 2014

General location aware systems are only applied to indoor and outdoor environments using more than three transmitters to estimate a fixed object location. Those kinds of systems have environmental restrictions that require an already established infrastructure. To solve this problem, an Object Location Estimation (OLE) algorithm based on PTP (Point To Point) communication has been proposed. However, the problem with this method is that deduction of performance parameters is not enough and location estimation is very difficult because of unknown restriction conditions. From experimental tests in this research, we determined that the performance parameters for restriction conditions are a maximum transmission distance of CSS communication and an optimum moving distance interval between personal locations. In this paper, a system applied OLE algorithm based on PTP communication is implemented using a CSS (Chirp Spread Spectrum) communication module. A maximum transmission distance for CSS communication and an optimum moving distance interval between personal locations are then deducted and studied to estimate a fixed object location for generalization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2583-2605
• /
• 2016

Fingerprint positioning is a main stream and key technique for seamless positioning systems. In this paper, we develop a performance evaluation testbed for fingerprint based Wireless Local Area Network (WLAN) positioning system. The testbed consists of positioning server, positioning terminal, Access Point (AP) units, positioning accuracy analysis system and testing scenarios. Different from other testbeds tended to focus on testing in same situation, in the proposed testbed, a couple of scenarios are set to test the positioning system including indoor and outdoor environments. Handset-side positioning mode and network-side positioning mode are provided simultaneously. Variety of motion models, such as static model, low-speed model and high-speed model are considered as well as different positioning algorithms. Finally, some implementation cases are analyzed to verify the credibility of the testbed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.209-214
• /
• 2006

Adjustable reflective color gamut RGBW transflective liquid crystal display (ARC RGBW TRLCD) applied simple manufacture process and image processing algorithm to achieve high brightness and good color performance both in transmissive and reflective mode. With appropriate modification higher transmittance but no color distortion happens in transmissive mode. Moreover, base on superior reflectance total brightness and color gamut also can be modified under different ambience. It provides the flexibility not only for any environments but also for variant personal hobbies. It is the best technique used both at indoor and outdoor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1613-1617
• /
• 2006

The total light efficiencies of the novel 1.9" transflective tRGB-t/rW and tRGB-rW TFT LCDs are calculated and they are implemented by the traditional 7-mask ${\alpha}$-Si processing. Then, the two vehicles are turned on with the appropriate Sub-Pixel Rendering White (SPRW) algorithms, so they can exhibit the extra luminance without the original visual resolution loss. Their outstanding optical properties are approved by measuring the contrast ratio (C.R.) and the NTSC ratio. Because they utilize the light resource very effectively and efficiently, they are very suitable for the dark indoor and the bright outdoor environments.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.63-69
• /
• 2014

In this study, due to the necessity of the equipment for inspecting an anti-jamming function depending on the expansion of the development of anti-jamming systems, an array antenna hood that can inspect the anti-jamming function of an anti-jamming system while being installed at the system was designed and manufactured. The manufactured array antenna hood plays a role in radiating GNSS signals and jamming signals. Based on an experiment, it was demonstrated that using a near-field radiation method, the manufactured array antenna hood could be used for examining the normal operation of an anti-jamming system function in outdoor or indoor environments rather than an anechoic chamber.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1137-1146
• /
• 2004

In an apartment house In Korea, the balcony is one of the important spaces as a buffer zone for controlling the outdoor environments such as noise, heating & cooling load, humidity etc. Because most areas of building facade in apartment building occupy the area of balcony window the sound Insulation design of It Is very Important to provide the quiet indoor environment. The aim of this research is to evaluate the sound insulation of balcony windows in apartment building by new and revised Korean Industrial Standards. We measured and studied the sound insulations of 18 balcony windows by the type of measuring methods, noise sources, correction of reverberation time in balcony and so on. The results show that the single-number quantities for sound insulation of windows are ranged from 24 dB to 30 dB.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1081-1089
• /
• 1996

In Korean agriculture, an automatic environment control system for greenhouse is essential to save labor and to increase the quality of products. The existing environment monitoring systems have weighed on greenhouse growers and researchers because of their high cost and difficult applications. Many sensors are widely used for monitoring the greenhouse environment, but most of commercial sensors are expensive and not suitable for use in greenhouses. Thus , the development of an environment monitoring system for exclusive use in greenhouses is essential . The objective of this study was to develop modular environment monitoring systems, which are low-cost , reliable and easy -to -use. The results showed that the sensors for indoor and outdoor environments and nutrient solution had the ranges and accuracies appropriate for use in greenhouses. Also the modular environment systems developed showed a satisfactory performance in terms of stability and reliability in the measurement and acquisition of the greenhouse environment data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.975-981
• /
• 2006

This paper shows a feasibility analysis results on RFID for car positioning system. Usually, a car navigation is mainly based on GPS combined with map-matching. However, in the case of poor visibility of satellites, GPS can not supply accurate position information continuously. In recent years, RFID has been considered to be one of key technologies in positioning and localization area. But its application and research results in the area of vehicular positioning are not popular. RFID system consists of tag, reader, antenna and software such as drivers and middleware. The main function of RFID system in a vehicular positioning is to retrieve ID recorded position information from tags which set on the center of road. We propose a positioning method for vehicles using RFID and we present some indoor and outdoor experiment results to show that the proposed method is available in vehicle operational environments.