• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.391-398
• /
• 2018

The main purpose of this study is to suggest and recommend the more reliable flow direction methods within the framework of DEM and power law distribution, by investigating the existing methodologies. To this end SFD (single flow direction method), MFD (multiple flow direction method) and IFD (Infinite flow direction method) are applied to analyze the determination of a flow direction for the water particles as seen in the Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation in that region. As the main results revealed, the study showed the different patterns of flow accumulation are found out from each applications of flow direction methods utilized in this study. This brings us to understand that as the flow dispersion on DEM increases, in this case the contributing areas to the outlet grow in sequence of SFD, IFD, MFD, but it is noted that the contribution of individual pixels into outlet decreases at that time. In what follows, especially with the MFD and IFD, the result tends to make additional hydrologic abstraction from rainfall excess, as noted due to the flow dispersion within flow paths on DEM. Based on the parameter estimation for a power law distribution, which is frequently used for identify the aggregation structure of complex system, by maximum likelihood flow accumulation can be thought of as a scale invariance factor. In this regard, the combination of flow direction methods could give rise to the more realistic water flow on DEM, as revealed through the separate flow direction methods as utilized for dispersion and aggregation effects of water flow within the available different topographies.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.3
• /
• pp.189-197
• /
• 2010

An orchestrated attempt was made to analyze samples of bulk and individual particulate matters (PM) collected at the Gosan ground-based station on the west coast of Jeju, Korea. A two-stage filter pack sampler was operated to collect particles in both large (> $1.2\;{\mu}m$) and small size fractions (< $1.2\;{\mu}m$) between the Asian dust (hereafter called "AD") storm event and non-Asian dust period. Elemental components in bulk and individual particles were determined by PIXE and synchrotron XRF analysis systems, respectively. To assess the transport pathways of air parcels and to determine the spatial distribution of PM, the backward trajectories of the Meteorological Data Explorer (Center for Global Environmental Research, 2010) and the NOAA's HYSPLIT dispersion-trajectory models were applied. In line with general expectations, Si and other crustal elements in large size particles showed considerably higher mass loading on AD days in comparison with non-AD days. Computation of the crustal enrichment factors [(Z/Si)$_{particle}$/(Z/Si)$_{desert}$ sand] of elements in large size particles (> $1.2\;{\mu}m$) allowed us to estimate the source profile and chemical aging of AD particles as well as to classify the soil-origin elements. On the basis of a single particle analysis, individual AD particles are classified into three distinct groups (neutralized mineral particles, S-rich mineral particles, and imperfectly neutralized particles).

• Journal of the Korean association of regional geographers
• /
• v.20 no.2
• /
• pp.217-229
• /
• 2014

This study was performed to identify neighborhood deprivation indicators associated with health and to test the contextual effects of those indicators on individual health. This study calculated SMR based on Dong district and see the differences of prediction across deprivation index and indicators. Then, a multi-level analysis using HGLM was conducted to test the contextual effect of neighborhood depreivation indicators on health after controlling for demographic and socioeconomic status of individuals. The results showed that regional SMR had strong correlations with land price, education, welfare recipients, female household proportion in Dong district but failed to show the correlation with individual health and neighborhood deprivation. Individual health was only associated with individual level of demographic and socioeconomic status. That is, spatial dispersion of illness is understood as the distribution of social classes in terms of socioeconomic status of individuals, not the contextual aspects of community.

• Journal of Environmental Impact Assessment
• /
• v.28 no.4
• /
• pp.413-426
• /
• 2019

Many factories indiscriminately located in the vicinity of residential areas need to be adjusted to quasi-industrial parks or new planning management area. In the present work, the changes of atmospheric $SO_2$ concentration according to clustering of individual location factories throughout Gimpo city into a new area were evaluated using a commercial dispersion model, AERMOD. As a result of the evaluation, it was suggested the possibility of improving the pollution through the relocation of individual factories. The combination of relocation and discharge regulation on the stack height may reduce the overall pollution from Gimpo approximately up to 70%, and some areas achieve maximum 87% decrease. However, the area selected as a cluster zone may show a relatively large increase compared to the change in the total pollution level of Gimpo.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.127-133
• /
• 2009

It is important to increase the strength of binders in order to enhance the strength of concrete. However, when the mineral admixture used for high strength concrete is incorporated individually, its dispersibility decreases due to the phenomenon of compaction, which reduces its fluidity and results in insufficient strength being created. To solve this problem, we can pre-mix each binder in advance to disperse a mineral admixture among binders, which will strengthen the fluidity and strength of concrete. Therefore, this study analyzed the properties of high strength concrete depending on the mix method used, to determine the effect of pre-mix cements ranging from W/B 15 to 35%. It was found that the fluidity of pre-mix increased to a level higher than that of individual mix due to its dispersion and ball bearing effect. The air content was slightly decreased from the result of individual mix due to the micro filler effect, which causes fine particles of silica-fume to fill the voids among cement particles, while the setting time of pre-mix was shorter than that of individual mix, because enhanced dispersion of pre-mix affects hydration heat time. The compressive strength of pre-mix increased due to the phenomenon of compaction of gap structure, and the variation of coefficient decreased by 1.69% on average in strength variation.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.51-59
• /
• 1997

These days leakage incidents of toxic materials cause serious effects on the nearby residents as well as the workers around the accidents accompanying massive material losses and human damages through widening influential areas. The risk measure through adequate quantitative analysis as well as the qualitative analysis of the leakage incidents of toxic materials becomes an urgent issue. The damage of the leakage incident on the surrounding area of the dangerous toxic material facilities was calculated quantitatively by adopting several models in this research. First, the calculations of the leakage velocity from the factories were performed by using source model for the assessment of the influential area, and the damages on the nearly residents were calculated by using the dispersion model and the effort model. The probability of the Incidents was computed based on "The manual for classification and priorization of major incidents" published by IAEA( International Atomic Energy Agency ). Above calculated damage area and incident probability were further adopted in this study to induce the individual and societal risk, quantitatively. The calculated data of the real Incident of the toxic material leakage showed reasonable agreements to the actual damage of the incidents, which showed a validity of this study. The result of this study might be a helpful measure for predicting damages and preparing safety systems for similar kinds of incidents.incidents.

• Nuclear Engineering and Technology
• /
• v.37 no.3
• /
• pp.245-258
• /
• 2005

This paper addresses two types of uncertainty: stochastic uncertainty and subjective uncertainty in probabilistic accident consequence assessments. The off-site consequence assessment code OSCAAR has been applied to uncertainty and sensitivity analyses on the individual risks of early fatality and latent cancer fatality in the population outside the plant boundary due to a severe accident. A new stratified meteorological sampling scheme was successfully implemented into the trajectory model for atmospheric dispersion and the statistical variability of the probability distributions of the consequence was examined. A total of 65 uncertain input parameters was considered and 128 runs of OSCAAR with 144 meteorological sequences were performed in the parameter uncertainty analysis. The study provided the range of uncertainty for the expected values of individual risks of early and latent cancer fatality close to the site. In the sensitivity analyses, the correlation/regression measures were useful for identifying those input parameters whose uncertainty makes an important contribution to the overall uncertainty for the consequence. This could provide valuable insights into areas for further research aiming at reducing the uncertainties.

• East Asian Economic Review
• /
• v.21 no.3
• /
• pp.201-230
• /
• 2017

This paper studies the long-run behavior of relative price dispersion among cities in Korea with a special emphasis on heterogeneous transitional patterns of price level dynamics. Formal statistical tests indicate considerable evidence for rejecting the null of relative price level convergence among the majority of cities over the sample period of 1985-2015. The analysis of gravity model suggests that the effect of transportation costs on intercity price level differentials is limited, while other socioeconomic factors, such as income, input factor prices, demographic structure, and housing price growth, play key roles in accounting for persistent regional price level disparities. Individual price levels are found to be better explained by a multiple-component model, and the deviations from PPP may be attributed to distinct stochastic common trends that are characterized by income and demographic structure.

• Nuclear Engineering and Technology
• /
• v.11 no.2
• /
• pp.127-132
• /
• 1979

A model is considered in order to evaluate the potential risk from a nuclear facility directly combining the on-site meteorological data. The model is utilized to evaluate the environmental consequences from the routine releases during normal plant operation as well as following postulated accidental releases. The doses to individual and risks to the population-at-large are also analyzed in conjunction with design of rad-waste management and safety systems. It is observed that the conventional analysis, which is done in two separate unaffiliated phases of releases and atmospheric dispersion tends to result in unnecessary over-design of the systems because of high resultant doses calculated by multiplication of two extreme values.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.190-190
• /
• 2006

The approach used in present work allows achieving highly exfoliated state of layered silicate s through confinement of the charged nanobeads within the gallery of swollen pristine clay. The latter is principally promoted by ion exchange that involves polar functional groups on the surface of nanobeads and sodium cation in the interlayer gallery of layered silicates. Surface functionality of the nanobeads plays crucial role in establishment of strong interactions with silicate surface, and eventually, dispersion of individual silicate nanoplatelets.