• Asia pacific journal of information systems
• /
• v.7 no.3
• /
• pp.109-124
• /
• 1997

Pricing information services, where congestion can threaten the efficient operation of information systems, has been studied in economics and information systems literature, Recent explosion of the Internet ana proliferation of multimedia content over the Internet have rekindled the research interest in designing pricing schedules for differentiated information services, In order for the information system to effectively serve users having heterogeneous needs, pricing rules for discriminated services should be considered. At the same time, when individual users' interest does not align with that of the organization that individual users belong to, organization-wide pricing policy should be devised to improve the value of the services rendered by the system. This paper, using a priority queuing model, addresses the need for such on incentive-compatible pricing for different information services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.536-542
• /
• 2016

Freight and passenger transport operators must converts the operation records of digital operation recording device (Digital Tachograph) that is mounted on their vehicle in a certain format, and report them to governmental agencies. However, for most of the individual carrier who cannot access a computer environment easily and are not familiar with the use of computer, it has given a big inconvenience to them because the procedures for entering the data obtained from the operation are so complicate. Therefore, in this study, a mobile system for converting the operation record file to request form of a government agency is designed and developed, so that the converted file can be submitted to the government agency in a simple way through the personal mobile device. By entering the data obtained from an actual operation recording device into the system, converting the data in the proposed algorithms, and checking the contents of the converted file in data viewer, it was confirmed that the proposed functions is working properly in the system.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.179-184
• /
• 2005

The purpose of this study was the development of teat-cup attachment module for robot milking system. The teat-cups attachment module was controlled on the two dimensional space independently, Each teat cup of an end effector was independently controlled via two axis control based on the position information data obtained from the image processing system. This system was developed install of all 4 teat cups at the same time after adjusting positions of each teat sequentially. The individual motion system was operated using two servo motors for the high speed of teat position adjustment. The errors fur the individual motion system of teat cups were maximum 1.0mm, minimum 0.0mm, and average 0.6mm. The operating time for adjusting the teat cups position required about 1.0 second. It is envisaged that teat cups attachment module can be applicate to milking robot being developed in consideration of the experiment results for the teat cups operation accuracy and the actuation speed of servo motors.

• Plant Journal
• /
• v.18 no.4
• /
• pp.48-57
• /
• 2023

In this study, I discussed a way of the improved operation criteria to detect combustion instability in advance F-Class Gas Turbine, which adopts lean pre-mixed combustion system. The data of 16 blades path temperature thermocouple installed radially at the gas Turbine exit were collected to analyze the variation of individual blade path temperature. The cumulative variation in individual blade path temperature for one week under normal combustion conditions was confirmed to be up to 26℃. On the other hand, in the event of combustion instability, the symptoms of increased temperature variations in the individual thermocouple were mostly seen from a few days ago. Based on the results of this study, it is deemed appropriate to inspect and maintain in Ulsan Thermal Power Gas Turbine when the individual blade path temperature exceeds 50℃ of the cumulative variation for 10 days.

• Journal of the Korean housing association
• /
• v.16 no.2
• /
• pp.55-65
• /
• 2005

'Movement System' is made of the interaction of user and architectural spaces related to each other in order. 'Movement' meant in movement system is possible only in the status of user and architectural space together. Movement created and disappeared by the user is not subordinated to the existing architectural space but becomes the main element of formating movement system. It is required that movement conception applied to architecture should be derived from the essence of movement and this study presents the movement system. To explain the formating process of movement system, A. N. Whitehead's process philosophy theory is at the basis and transformed in architectural aspects. On basis of these theoretical backgrounds, the process of making movement system can be explained. There are unit movement, unit object, and elements for movement process as the basic requirements for movement system, each unit is apprehended by individual operation and the nexus is composed by associative operation of apprehended units. This nexus becomes the object of a new subject and forms multiple nexus. Relation of unit movement and unit object and nexus are apprehended as the continuation and extensive continuum is made. At that time, movement with multiple phases set inbetween systems and extended multiplied. Through above study, movement system is applied to Korean traditional houses.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.806-813
• /
• 2013

This paper aims to compare the performance of three phase induction motor drives using Five Leg Inverter (FLI) and Three Leg Inverter (TLI) configurations. An Indirect Field Oriented Control (IFOC) method using a TLI is well established and incorporated for high performance speed drives in various industries. The FLI dual motor drive system on the other hand shows good workability in the independent control of two induction motor drives simultaneously. In this experiment, the IFOC method is utilized for both drive systems, and Space Vector Pulse Width Modulation (SVPWM) is used to generate pulses for both inverters. For the FLI, the Double Zero Sequence (DZS) Injection technique is used to generate the modulation signal. The complete experiment setup is done by using a DSpace 1103 controller board. The individual motor performances are analyzed using similar schemes, equipment setups and controller parameter values. The results show similar speed performance response capability between the single motor operation using a TLI system and the two motor operation using a FLI system based on the variable speed range either in forward or reverse operation. They also show similar load rejection abilities. However, the single motor with a TLI has a better power quality aspect such as ripple current and total harmonics distortion (THD).

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.590-599
• /
• 2010

Recently, efficient operation and practical management of power plants have become important issues in the nuclear industry. In particular, typical aging parameters such as stress and cumulative usage factor should be determined accurately for continued operation of a nuclear power plant beyond design life. However, most of the major components have been designed via conservative codes based on a 2-D concept, which do not take into account exact boundary conditions and asymmetric geometries. The present paper aims to suggest an effective fatigue evaluation methodology that uses a prototype of the integrated model and its transfer functions. The validity of the integrated 3-D Finite Element (FE) model was proven by comparing the analysis results of individual FE models. Also, mechanical and thermal transfer functions, known as Green's functions, were developed for the integrated model with the standard step input. Finally, the stresses estimated from the transfer functions were compared with those obtained from detailed 3-D FE analyses results at critical locations of the major components. The usefulness of the proposed fatigue evaluation methodology can be maximized by combining it with an on-line monitoring system, and this combination, will enhance the continued operations of old nuclear power plants.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.63-68
• /
• 2003

This paper is to measure the sensitivity of relations in communication network operation. In order to procure an important adequacy in the network operation and quality improvement, it is necessary to increase network operation efficiency and analyze the characteristic of network operation. Finally, we analyze costing appropriate operation, propose profit increase scheme and apply realistic business. First of all it's important to improve and estimate a proper operating cost thoroughly and comprehensively. Because the important issue of this process is quality process and this quality process occurs customers' satisfaction, therefore, to make a mutual relation in-between individual change of each element is to analyze a reasonable standard. So, for this reason we study on structuring nice moods for network operation and estimating many scenarios for measuring efficiency. Especially those in economic and sensitivity based. It will be the development of analyzing methods which suites the service and communication system. The result of this study gives a basis for making a flexible and highly predictable system by pre configured sensitivity analysis of each scenarios.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1843-1850
• /
• 2014

In this paper, we investigate a group building based power consumption scheduling to minimize the electricity cost. We consider the demand shift to reduce the peak load and suggest the compensation function reflecting the relationship between the change of the building demand and the occupants' comfort. Using that, the electricity cost minimization problem satisfied the convexity is formulated, and the optimal power consumption scheduling algorithm is proposed based on the iterative method. Extensive simulations show that the proposed algorithm achieves the group management gain compared to the individual building operation by increasing the degree of freedom for the operation.

• Journal of the military operations research society of Korea
• /
• v.29 no.1
• /
• pp.8-27
• /
• 2003

This paper develops a methodology that can be used to quantify the assesment of power improvement effectiveness of corps level C4I system applied to integrated fire operation by adapting Schuzer's C2 theory. This paper first describes how C4I systers can enhance the battle outcome in three way. : (1) Enhanced unit probability of survival; (2) Enhanced unit's individual effectiveness; improved exchange ratios; (3) Improved task force allocations : increased percentage of assets that can be assigned to a given engagement These enhancements are then show to result from improved probability of detection through information sharing; improved survivability and lethality through battle force coordination; and enhanced force allocation and prepositioning through improved timeliness of information(more advanced warning). It demonstrates that well-designed C4I systems can be shown to represent a significant force multiplier on the outcome of the battle.