• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.122-129
• /
• 2017

For the production of a high-density ITO target, $In_2O_3$ powders with a small particle size and low agglomeration should be synthesized. The purpose of this study is to control the size and shape of the Indium hydroxide precursor which affects the properties of the $In_2O_3$ powder. As a starting raw material, Indium metal was dissolved in a Nitric acid ($HNO_3$) solution. The effect of concentration, pH, and temperature on the properties of Indium hydroxide was investigated using ammonium hydroxide as a precipitant. Crystallite size of each sample was analyzed by X-ray diffraction and the shape and the size of the powder was analyzed by transmission electron microscopy. As a result, the particle size of Indium hydroxide was increased with increase in the concentration of $In(NO_3)_3$ and the particle size and shape of the Indium hydroxide remained unchanged with increase in the pH of the solution. The particle size increased with increase in the precipitation temperature during precipitation.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.184-189
• /
• 1998

Tris(pentafluorophenyl)indium acetonitrile complexes have been prepared from the reaction of Indium trihalides (halogen=Cl, Br) and bis(pentafluorophenyl)cadmium in acetonitrile, and characterized by elementary analysis, $^13C{^1H}-,\; ^1H-\;and\; ^{19}F-NMR$ spectroscopy and mass spectrometry. The Indium (III) compounds were formed stable 1:1 adducts with acetonitrile. $In(C_6F_5)_3{\cdot}DMAP$ has been prepared from the ligand exchange reaction of In$(C_6F_5)_3 {\cdot} CH_3CN$ with DMAP in $CH_2Cl_2 {\cdot} DMAP$ has higher donating character and replaced the $CH_3CN$ through the ligand transfer reaction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.182.1-182.1
• /
• 2015

Transparent conducting oxides (TCOs)는 높은 투과율과 낮은 전기전도도를 갖고 있어 광다이오드, 태양전지 등 광소자에 적용하기 위해 많은 연구가 진행되어 왔다. 특히 Indium oxide 계열의 박막은 TCO 물질 중 하나로서 3.6 eV 의 wide bandgap을 가지고 있고, 높은 투과율과 낮은 전기 전도도 (< $10-3{\Omega}cm$)를 보여 다양한 응용이 가능해 오랫동안 연구 되어 지고 있다. 게다가 Indium oxide 계열의 박막은 낮은 가격과 화학적 안정성, 공정과정의 편의성 등 다양한 이점을 가지고 있어서 현재는 더 낮은 가격으로 생성해 더 높은 효율을 만드는데 관심이 집중되고 있다. 이러한 박막은 태양광 흡수층에서 생성되는 캐리어의 이동 및 외부 전극과의 접촉에서 발생하는 손실을 줄이기 위한 전극용 소재로 연구되어지고 있다. 본 연구에서는 Indium Molybdenum Oxide 박막을 Indium oxide와 Molybdenum 타겟을 이용하여 co-sputtering 방법으로 증착하였다. Indium molybdenum oxide 박막은 일정한 Mo 도핑농도와 일정한 Ar 개스 분압에서 다양한 기판온도 변화를 통해 증착하였다. 제작된 Indium molybdenum oxide 박막은 Hall Effect Measurement, Ultraviolet-Visible spectroscopy 및 X-Ray Diffraction (XRD) 등을 분석해 기판의 온도변화에 따른 전기비저항 및 광 투과도의 특성변화를 조사하였다.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.3-10
• /
• 2013

Indium is one of the rare metals, and it has been used mainly for preparation of indium tin oxide (ITO). This review investigated the process parameters and the merits and demerits of several methods to recover indium from the leaching solution of secondary resources, such as solvent extraction, ion exchange, and precipitation. D2EHPA has been used mostly as a cationic extractant for indium extraction in moderate acid solutions, while amine extractants are used in strong hydrochloric acid solution. Since the loading capacity of resins for indium is generally small, ion exchange has some advantage over solvent extraction only when the concentration of indium is low.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.108-113
• /
• 2013

Objectives: Although several cases of lung diseases caused by indium have been reported in Japan, the United States and China, South Korea, which is estimated to have been the world's largest consumer of indium, has not yet established a criteria for the diagnosis of lung diseases caused by indium exposure. In this study, we tried to determine the applicability of the Krebs von den lungen-6, which has been widely recognized for its use with interstitial lung disease in Japan, as a biological exposure index for indium. Methods: Methods: The analysis of indium in serum was conducted by inductively coupled plasma mass spectrometry and the analysis of KL-6 in serum was carried out using enzyme-linked immunosorbent assay kit. Results: The indium levels in serum were distributed from below the detection limit to a peak of $125.78{\mu}g/L$, and the values of the KL-6 were distributed from 104.5 U/mL to 2162.2 U/mL. The serum indium and KL-6 showed good correlation ($R^2$=0.389,pfortrend=0.000) and smoking did not affect the KL-6. Conclusions: The usefulness of KL-6 as a specific biomarker for interstitial lung disease has been recognized. In addition, it is expected that effective prevention of health problems can be achieved by determining the lung-damage progress at an early stage according to individual susceptibility.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.91-97
• /
• 2018

Indium hydroxide powder was prepared by precipitation method. The reaction temperature ($150{\sim}250^{\circ}C$) and the holding time at each reaction temperature (1~72 h) were used as experimental variables. The particle size, microstructure and crystal phase of each prepared powder were observed through X-ray diffraction (XRD), Transmission electron microscope (FE-TEM) and BET. In this study, we investigated the phase and microstructural change induced by heat treatment of indium hydroxide nanoparticles at various temperatures for different holding times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.183-183
• /
• 2009

본 연구에선 ITO에 사용되는 Indium의 양을 줄이기 위해 ITO와 유사한 성질을 보이는 조성인 Indium - Zinc - Tin Turnary compound를 연구하였다. 각 조성은 Indium - Zinc - Tin Turnary compound를 기본으로 하여 Zinc site에 이종원소인 Al2O3와 Ga2O3를 doping함에 따라 변화되는 전기적 특성을 살며보았다. 분석에 사용한 Ceramic pellet은 일반적인 Ceramic process를 거쳐 제작되었다. 각 조성의 전기적 특성은 TCR meter와 Hall effect analyser를 이용하여 측정하였고, X-ray diffraction measurements(XRD), Scanning Electron microscope(SEM)를 이용하여 결정학적 특성을 분석하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.636-639
• /
• 2001

InGaN/GaN multiple quantum wells (MQWs) grown with various growth interruptions between the InGaN well and GaN barrier by metal-organic chemical vapor deposition were investigated using photoluminescence, high-resolution transmission electron microscopy, and energy filtered transmission electron microscopy (EFTEM). The luminescence intensity of the MQWs with growth interruptions is abruptly reduced compared to that of the MQW without growth interruption. Also, as the interruption time increases the peak emission shows a continuous blue shift. Evidence of indium clustering is directly observed both by using an indium ratio map of the MQWs and from indium composition measurements along an InGaN well using EFTEM. The higher intensity and lower energy emission of light from the MQW grown without interruption showing indium clustering is believed to be caused by the recombination of excitons localized in indium clustering regions and the increased indium composition in these recombination centers.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3299-3302
• /
• 2014

The In2S3 thin films of tetragonal structure and In2O3 films of cubic structure were synthesized by a spin coating method from the organometallic compound precursor triethylammonium indium thioacetate ($[(Et)_3NH]^+[In(SCOCH_3)_4]^-$; TEA-InTAA). In order to determine the electron mobility of the spin-coated TEA-InTAA films, thin film transistors (TFTs) with an inverted structure using a gate dielectric of thermal oxide ($SiO_2$) was fabricated. These devices exhibited n-channel TFT characteristics with a field-effect electron mobility of $10.1cm^2V^{-1}s^{-1}$ at a curing temperature of $500^{\circ}C$, indicating that the semiconducting thin film material is applicable for use in low-cost, solution-processed printable electronics.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.65-67
• /
• 2012

The desorption characteristics of previously adsorbed indium ions on phosphorylated sawdust were tested by various chemical reagents such as HCl, $HNO_3$, NaCl, ethylenediaminetetraacetic acid, and nitrilotriacetic acid. Among them, HCl was chosen as the best desorbing agent in terms of economics. The desorption efficiency of HCl for indium ions was about 97% at a concentration of 0.5 M. The desorption efficiency for indium ions was very high at about 94% even at a solid/liquid ratio of 10.0, and the desorption process was quickly performed within 60 min. The removal efficiency of indium ions in recycled phosphorylated sawdust could be maintained at 85% in the 4th cycle.