• 대한수의학회지
• /
• 제52권1호
• /
• pp.25-31
• /
• 2012

Brucella (B.) canis is mainly transmitted by direct or indirect contact with aborted fetuses and placenta. It's also known to be able to infect human, which likely results in providing veterinarians and companion animal owners for infectious risk. To develop diagnostic ELISA, we cloned and expressed rp1L gene of B. canis, which encodes the ribosomal protein L7/L12. Using this purified recombinant protein, indirect-ELISA (iELISA) was evaluated using 78 positive and 44 negative sera. The sensitivity and the specificity of iELISA were 94% and 89%, respectively. The results indicated that indirect-ELISA using recombinant ribosomal protein L7/L12 may be useful for diagnosis of canine brucellosis.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.20-25
• /
• 2017

Dynamo based vehicle inspection device is end of line device for automobile industry. The device is utilized as implementing vehicle functionality inspection such as brake force, cruise control, kick-down acceleration, CAN inspection. As dynamo based inspection device is broadly adopted in automobile industry, the dynamic study is required to verify the vehicle test equipment reliability. This research recommends appropriate dynamic brake force inspection procedure and theoretical background for developed equipment. Dynamic characteristic of brake force implementation to roller is simplified. With simplified characteristics, the indirect brake force measurement strategy is developed and adopted. Comparison of each brake force result, the appropriate brake force inspection criterion is given.

• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.67-74
• /
• 2019

Visual inspection is regarded as one of the critical activities for quality control in a manufacturing company. it is thus important to improve the performance of detecting a defective part or product. There are three probable working modes for visual inspection: fully automatic (by automatic machines), fully manual (by human operators), and semi-automatic (by collaboration between human operators and automatic machines). Most of the current studies on visual inspection have been focused on the improvement of automatic detection performance by developing a better automatic machine using computer vision technologies. However, there are still a range of situations where human operators should conduct visual inspection with/without automatic machines. In this situation, human operators'performance of visual inspection is significant to the successful quality control. However, visual inspection of components assembled into a mobile camera module belongs to those situations. This study aims to investigate human performance issues in visual inspection of the components, paying more attention to human errors. For this, Abstraction Hierarchy-based work domain modeling method was applied to examine a range of direct or indirect factors related to human errors and their relationships in the visual inspection of the components. Although this study was conducted in the context of manufacturing mobile camera modules, the proposed method would be easily generalized into other industries.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.1-7
• /
• 2015

This study first addresses the ineffectiveness of indirect regulation on industrial machines. Analysis of causes of industrial accidents associated with industrial machines further reveals the fact that technical causes need to be resolved at the manufacturing stage to reduce the frequency and strength of industrial accidents. Balanced safety certification on manufacturers and safety inspection on users of industrial machines are then suggested to effectively resolve such technical causes. The effectiveness of such safety certification and safety inspection can be justified by cost-benefit analysis. Particularly, balance in expected benefits of safety certification and safety inspection is a key issue for validity of such analysis. The accumulated benefit-costs for press brake and portable sawing machine confirm the effectiveness of such safety system.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.1-8
• /
• 2014

Safety certification and inspection of dangerous machines and equipments used in industries are to save lives of workers and properties involved. Cause analysis of industrial accidents is essential to prove the effectiveness of such certification and inspection. This study focuses on suggesting systematic method for cause analysis of industrial accidents associated with dangerous machines and devices. Incorporating transition from the current user-oriented indirect regulations to more manufacturer and user balanced direct regulations, suggested method coupled with safety certification, safety inspection, safety management and safety education will guarantee more effective prevention of industrial accidents.

• 대한임베디드공학회논문지
• /
• 제16권4호
• /
• pp.129-136
• /
• 2021

River facilities and port structures require a regular inspection and diagnosis due to obsolescence. Currently, most river facilities are undergoing indirect inspection and diagnosis by divers. The underwater inspections are not feasible due to safety issues of divers and restrictions on working hours and environment. To overcome these issues, it is intended to conduct inspections of river facilities using underwater drones. In this research, an underwater ROV (Remote Operated Vehicle) has been developed, which is a kind of drone with propellers. As a key device of this research, an injection device has been attached to the underwater drone to conduct an operation test, a stable operation test of an underwater drone, and a test of attached sensors. The river facility inspection can be carried out optimally using the hovering control of the drone and injection systems. With the developed ROV system, hovering test and injection test have been performed to verify the feasibility of this development.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.189-199
• /
• 2002

This study is intended to propose a systematic procedure for the development of the conditional assessment based on the safety of structures and the cost effective performance criteria for designing and upgrading of bridge structures. As a result, a set of cost function models for a life cycle cost analysis of bridge structures is proposed and thus the expected total life cycle costs (ETLCC) including initial (design, testing and construction) costs and direct/indirect damage costs considering repair and replacement costs, human losses and property damage costs, road user costs, and indirect regional economic losses costs. Also, the optimum safety indices are presented based on the expected total cost minimization function using only three parameters of the failure cost to the initial cost (${\tau}$), the extent of increased initial cost by improvement of safety (${\nu}$) and the order of an initial cost function (n). Through the enough numerical invetigations, we can positively conclude that the proposed optimum design procedure for bridge structures based on the ETLCC will lead to more rational, economical and safer design.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.93-101
• /
• 2023

In this study, a deep learning algorithm was used to diagnose electric potential signals obtained through CIPS and DCVG, used indirect inspection methods to confirm the soundness of buried pipes. The deep learning algorithm consisted of CNN(Convolutional Neural Network) model for diagnosing the electric potential signal and Grad CAM(Gradient-weighted Class Activation Mapping) for showing the flaw prediction point. The CNN model for diagnosing electric potential signals classifies input data as normal/abnormal according to the presence or absence of flaw in the buried pipe, and for abnormal data, Grad CAM generates a heat map that visualizes the flaw prediction part of the buried pipe. The CIPS/DCVG signal and piping layout obtained from the 3D finite element model were used as input data for learning the CNN. The trained CNN classified the normal/abnormal data with 93% accuracy, and the Grad-CAM predicted flaws point with an average error of 2m. As a result, it confirmed that the electric potential signal of buried pipe can be diagnosed using a CNN-based deep learning algorithm.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.101-111
• /
• 2013

본 연구에서는 울산~포항 간 복선전철 건설예정인 교량을 사례로 교량형식별 LCC 개념을 적용 경제성이 가장 우수한 공법을 적용하기 위하여 같은 연장 (L=1,615m)을 갖는 유사한 4개 교량에 대한 DEA (Data Envelopment Analysis) 분석을 실시하였다. DEA 모형은 상대적 효율성 평가를 위해 개발된 CCR 모형을 사용하였으며, 투입변수로 초기건설비용, 유지관리비용, 간접비용 (사용자비용 + 사회간접 손실비용), 생애주기비용을 사용, 산출변수로는 평균 내구연한을 사용하였다. 투입 변수 산정을 위해 생애주기비용 분석을 사용하였는데 생애주기 비용 산정은 분석기간 100년, 실질할인율 4.83%를 적용 하였으며, 비용의 분류는 초기건설비용, 유지관리비용, 사용자비용, 사회간접손실비용으로 분류 하였다. 분석결과, 비교 2안과 비교 3안이 가장 효율적인 것으로 분석되었으며, 나머지 대안의 효율성은 비교 1안, 기본안, 비교 4안 순서로 나타났다.