• 한국분말재료학회지
• /
• 제4권4호
• /
• pp.291-297
• /
• 1997

Titanium cabide, TiC-x mole% Al composites, and functionally-graded materials (FGMs) of TiC-x mole% Al were synthesized by an electrothermal combustion (ETC) method. TiC-70 mole% Al composite was not ignited by indirect tungsten coil heating, but can be synthesized by an electrothermal combustion. The velocity of the combustion wave decreased with increasing addition of Al and increased with an increase in the applied electric field. Functionally-graded TiC-Al materials were made from reactant layers with compositions of Ti+C+x moles Al with x ranging from zero to 70 by an electrothermal combustion. In the FGM products a nearly linear change in composition in the graded region was observed in samples with 0$\leq$ x $\leq$ 70 with x being the mole% Al.

• 동굴
• /
• 제85호
• /
• pp.1-14
• /
• 2008

Electroluminescent Display(ELD) will be the innovative ideas to replace existed electricity illumination systems that consider to under effectiveness and environmental pollution generators in the commercial caves because ELD has less heat and low electricity consumption by the new illumination materials. Characteristics of the ELD are as following: it is a proper matter for the small merchandise ads due to its thickness is only below 3oo micoron, electricity consumption of ELD is less (1/3) than LED, ELD that is a whole face illumination system is much brighter than LED that is a dot illumination system, ELD is longer life than others due to its less light generation systems, ELD is any problems to bend, and it is a best device to use a light board ads. ELD has advantages on conservation of cave biosystems and reduce pollution when ELD is installed in touring spots and emergency corridors of weak illuminated cave internal areas by less heating and low electricity consumption using the indirect illumination of the ELD. Therefore when the high technologic ELD is installed in the commercial caves in Korea, it will be innovating cave environmental systems, saving budgets, and increasing tours.

• 한국환경과학회지
• /
• 제18권2호
• /
• pp.187-195
• /
• 2009

This study was investigated to control the corrosion and scale at the cooling water system in steel works. Laboratory and field tests were performed for the indirect cooling water system of plate mill. Throughout the experiment, various factors such as leakage of pipes, heating rate and capacity, and the reaction between existing and substitute inhibitors were carefully monitored. The results showed that the harmful effect of high temperature could be minimized, and satisfactory corrosion/scale controls were effectively achieved using inhibitor, even at the increased temperature of $80^{\circ}C$. The batch and field tests in the gas scrubbing cooling water system of blast furnace and cooling water system of corex plant indicated that the new inhibitor was more effective for the prevention of corrosion and scale than the existing one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2543-2545
• /
• 1999

This Paper Presents the identification of rotor time constant using Neural Network. The difference between the rotor time constant of a controller and the actual one causes the degradation of motor performance in indirect vector control scheme. The actual value is varied by heating of motor, so on-line tuning method is necessary. Therefore, the identification using Neural Network is used in this paper. The simulation using Matlab/Simulink shows that the proposed method suitably identifies the rotor time constant in the steady state

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.84-90
• /
• 2002

In 1995 we licensed pyrolysis gas melting technology of indirect heating type (using kiln) from Siemens AG, and built its demonstration facility in 1998 at Clean-Park-East of Fukuoka City to demonstrate the technology for municipal solid waste (MSW). In 1997 we were awarded an order from Kanemura Co., Ltd. to build a pyrolysis gas melting and power generation plant, specifically for treating residue from car shredder. The latter was launched in 1998, and is currently in commercial operation. The operation of these plants have proven the following facts. (1) The system is capable for performing a stable operation with a wide variety of waste. (2) Pyrolysis is achieved steadily regardless of the variation in the quality of waste. (3) The system can be operated under low excess air ratio (1.2∼1.3). (4) The concentration of dioxins at the furnace outlet is 0.062ng-TEQ/㎥$\_$N/, and 0.002ng-TEQ/㎥$\_$N/, at the stack. (the value is corrected to dryO$_2$ 12％) (5) The purity of recovered metals exceeds 90%.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.41-45
• /
• 2016

Statistical data show that a large aircraft(transport category) is struck by lightning once a year or once per 1,000 ~ 20,000 flight time. The protection design for lightning must be applied to the aircraft because an aircraft is developed on condition that it is absolutely struck by lightning. For the proper protection design, we need to understand direct effect and indirect effect of lightning. This paper described the direct effect of lightning on aircraft's structures and systems.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.119-125
• /
• 2004

Radiant tube heaters are widely used for indirect heating in heat treatment processes such as continuous annealing line(CAL) or continuous galvanizing line(CGL). Main issues for radiant tube are temperature uniformity, lifetime, thermal efficiency. To achieve higher heat release, the radiant tubes are fired at a higher fuel rate and therefore local overheating occur. A numerical simulation based on a commercial code FLUENT has been performed to investigate local overheating of radiant tube heaters. To minimize local overheating, the effects of radiating fins, flue gas recirculation(FGR), two-stage combustion were investigated. More uniform temperature distribution was achieved in the longitudinal direction within the tube with radiating fins and this contributed to increase the life of radiant tubes. Furthermore, the radiant tube with radiating fins was proven to be more efficient than the one without fins. The effects of flue gas recirculation and two stage combustion on the efficiency of the radiant tube were also considered and the results were presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1093-1097
• /
• 1996

The Substitution development of 7075-T6 Al alloy to 7050-T74 Al alloy in small arms to improve anti-stress corrosion cracking was processed along with mass productivity consideration. To meet 7050 Al alloy material characteristics Indirect extrusion type was adopted and local heating above recrystalization temperature in forging process had to be avoided. The T74 aging treatment was 12$0^{\circ}C$ -6hrs and 175$^{\circ}C$ -12hrs and was appropriate for both machanical and anti-cohesion properties. In accessment of field application test 7050Al alloy made parts of small arms showed equivalent or better performance than 7075 Al alloy.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.531-536
• /
• 2016

세계적으로 온실가스저감에 대한 요구가 높아지고 있는 가운데 고효율 발전 시스템의 개발에 대한 연구개발이 꾸준히 진행되고 있다. 초임계 $CO_2$ 발전기술은 효율 향상과 소형화, 다양성의 장점을 가지고 있어, 2000년대 이후 세계 여러 나라에서 연구개발에 박차를 가하고 있다. 초임계 $CO_2$ 발전 시스템은 $CO_2$를 작동유체로 하는 발전 시스템으로 크게 간접가열방식과 직접가열방식으로 구분될 수 있다. 현재, 대부분의 연구는 간접가열방식의 초임계 $CO_2$ 발전 시스템 개발에 집중되어 있고, 미국은 NREL을 중심으로 태양열 연계 초임계 $CO_2$ 발전 시스템을 개발 중이며, DOE는 올 해 화력 연계 초임계 $CO_2$ 발전 시스템 개발에 대한 투자도 시작할 계획이다. GE는 10MW급 초임계 $CO_2$ 발전 시스템 개발뿐만 아니라, 50MW급과 450MW급 초임계 $CO_2$ 발전시스템의 개념 설계도 진행 중에 있다. 우리 나라에서는 원자력연구원이 초임계 $CO_2$ 발전시험 설비를 구축해오고 있으며, 한국전력공사 전력연구원은 현대중공업과 함께 디젤 및 가스엔진 폐열을 이용하여 2MW급 초임계 $CO_2$ 발전시스템 개발을 진행 중에 있다.

• 한국식품과학회지
• /
• 제41권4호
• /
• pp.355-361
• /
• 2009

본 연구는 참기름 제조 과정 중 참깨를 볶는 과정에서 온도와 시간에 따른 PAHs 생성량 변화를 분석하고 볶음방법에 따라 PAHs 생성량의 변화를 알아보고자 실시하였다. 분석 표준물질은 돌연변이원성과 발암성이 있는 것으로 알려진 8가지 PAH를 선정하여 HPLC/FLD를 이용하여 정성 정량분석을 하였고, 제조한 참기름의 색도를 비교해보기 위해 색차계를 이용하여 명도(L), 적색도(a), 황색도(b)를 측정하였다. 분석 결과 참깨를 볶는 온도와 시간에 따라 PAHs 함량은 1.67-4.66 ${\mu}g$/kg으로 증가하였다. 가열 온도가 증가할수록 PAHs 생성량은 유의적으로 증가하였다. 가열 시간에 따른 PAHs 함량을 비교해보면, 190, $220^{\circ}C$에서 가열 시간이 늘어날수록 PAHs 생성량은 다소 증가하였으나 유의적인 차이가 없었지만, 고온인 $250^{\circ}C$에서는 볶음 시간이 늘어남에 따라 PAHs 생성량은 유의적인 차이를 보였다. 볶음 방법에 따른 PAHs 함량은 간접가열 방식인 열풍을 이용하여 참깨를 볶은 후 착유한 참기름이 직접가열 방식으로 볶은 후 착유한 참기름보다 적게 검출되었다. 참기름의 색도를 비교했을 때 온도와 시간이 증가함에 따라 명도(L)와 황색도(b)는 감소하였고, 적색도(b)는 증가하였다. 볶음 방법 중 열풍가열 조건에서 $250^{\circ}C$에서 10-25분 볶은 후 착유한 참기름의 색도가 시중에 판매되고 있는 참기름과의 색도와 비슷한 결과값을 나타냈다. 반면에 직접 가열 조건에서 볶은 참깨를 착유한 참기름의 색도는 시중에 판매되는 참 기름 보다 명도(L), 적색도(a), 황색도(b)가 낮아 어둡고 탁한 색을 띄어 품질적인 차이를 보였다. 결론적으로 PAHs 생성량을 고려해 볼 때 참기름 제조에 가장 적당한 볶음 온도와 시간은 낮을수록 좋으나 색도에서 품질적인 차이를 보였다. 이에 따라 본 실험을 통해 색도, 가열온도와 시간, 가열방법을 생각해 볼 때, 열풍 가열방법 $250^{\circ}C$에서 10분간 볶은 후 착유하는 참기름 제조 방법이 가장 효율적인 가공방법으로 판단되었다.