• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.9-14
• /
• 2009

A variety of Certification systems are initiated, as increased demands for housing quality of building & house owner. New building and apartment built in Seoul metropolitan should acquire Building Energy Rating System and Housing Performance Grade indication System, Green Building Certification System. Building Energy Rating System could be acquired through the certification from energy performance index of environment grade in Housing Performance Grade Indication. Between Housing Performance Grade Indication and Green Building Certification System, There are troublesome to acquire certification because a lot of assessment items are overlapped. At a result, the rational and efficient certification system should be initiated not only to avoid overlap among those certification systems and promote Green Building market share but also efficient certification system operation. We will discuss on assessment items between Housing Performance Grade Indication System and Green Building Certification System and release the improvement method those Certification Systems to avoid overlapping to assessment items.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2010

It is difficult to predict the accurate fatigue life of the ship structure because of load uncertainty and load redistribution at the ship structure members. As one of studies for accurate evaluation and prediction of fatigue life, it is a promising way to detect the crack previously by attaching the Fatigue Indicator Sensor (FIS) at the crack prediction region. In order to predict the fatigue life of the ship structure by using FIS, it is required to know previously the crack propagation characteristics according to pre-notch shapes. In this study, we obtained the stress distribution phase, stress concentration factors and stress intensity factor of various pre-notch shapes through FEA. Additionally, we conducted the fatigue test and obtained the characteristics of crack propagation according to the pre-notch shapes through comparison between the fatigue test and the FEA. Consequently, we classified the pre-notch shape into 3 categories: Long, Medium, and Short life type. On the basis of the numerical and experimental results, the FIS can be developed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.101-111
• /
• 2004

In order to guarantee the stability of a tunnel and its optimum design, it is very important to obtain enough ground investigation data. In realty, however, it is not the case due to the limitation of measuring spatially distributed data and economical reasons. Especially, there are regions where drilling is impossible due to civil appeal and mountainous topology, and it is also difficult to estimate rock mass classes quantitatively with only geophysical exploration data. In this study, therefore, 3 dimensional multiple indicator kriging (3D-MI kriging), which can incorporate geophysical exploration data and drill core data off a tunnel center line, is proposed to cope with such problems. To this end, two dimensional mutiple indicator kriging, which is one of the geostatistical techniques, is extended for three dimensional analysis. Also, the proposed 3D-MI kriging was applied to determine the rock mass classes by RMR system for the design of a Kyungbu express rail way tunnel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.661-669
• /
• 2017

This paper describes an MMTI(Maritime Moving Target Indicator) for periscope detection in airborne radar. Firstly, we analyze the characteristics of sea clutter, sea targets. Secondly, we study the differences between GMTI(Ground Moving Target Indicator) and MMTI. This paper proposes an optimal MMTI operating environment and method. We also suggest a signal processing algorithm using STAP(Space-Time Adaptive Processing) for detecting small RCS target moving low speed. The detection probability for moving target with MDV(Minimum Detectable Velocity) is simulated under various RCS and multi-channel system. Finally, we analyze the major performance for range, velocity and azimuth accuracy.

• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.35-42
• /
• 1996

In this paper, a development of model based battery SOC indicator is described. The proposed method is independent upon initial SOC, is reliable on the sudden change of load, and could estimate the available driving distance. The mathematical model of battery which has relation of the current, voltage and SOC estimates the SOC by least square estimation to minimize the error between measured voltage and estimated voltage. For experiment, the charging and discharging system using computer was designed to acquire the current and voltage data for model. The feasibility in electric vehicle was confirmed by variable load testing using the developed SOC indicator by stand-alone type microcontroller.

• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.152-164
• /
• 2019

In this study, a Benthic Macroinvertebrates Family Index (BMFI) was developed using 100 indicator groups (99 families including Chironomidae with 2 phena). Families were assigned a score between 1 and 10 depending on their sensitivity to organic pollution. The BMFI was composed of the sensitivity and relative abundance of the indicator taxa. Sensitivity values of each group were generally similar to Biological Monitoring Working Party (BMWP) scores or Walley, Hawkes, Paisley, Trigg (WHPT) scores of UK, Japanese BMWP scores, and the FBI tolerance values of North America. However, sensitivity values of some taxa were significantly different from those of foreign countries, which seemed to have resulted from discrepancy in species composition, difference of taxonomic classification system, or methodological difference for estimation of sensitivity. As an annual average level, BMFI showed significant correlation with concentration of 5-day biochemical oxygen demand (BOD5) (correlation coefficient r = -0.80, n = 569 sites), total suspended solids (r = -0.68), and total phosphorus (r = -0.79). In addition, BMFI revealed strong correlation with Shannon-Weaver's species diversity (r = 0.85), Margalef's species richness (r = 0.85) and McNaughton's dominance (r = -0.84). Correlation between BMFI and water quality parameters or community indices such as species diversity did not show significant difference compared to that of species-level indices such as BMI (Benthic Macroinvertebrates Index). This means that BMFI is a more useful indicator in terms of easy identification of organisms. BMFI was used to assess the environmental status of 3,017 sites of Stream Ecosystem Survey conducted by the Korean Ministry of Environment between 2016 and 2018. As a result, about half of all sites appeared to be in good condition, and a quarter in poor condition.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.220-231
• /
• 2021

The use of digital copies of film-based analog images and the introduction of digital radiographic imaging systems using image plates gradually replace the non-destructive radiationirradiation method of Cultural Heritage. The quality of images obtained from this technique is affected by conditions such as tube voltage, tube current, and exposure time, type of image acquisition medium, distance of the artifacts from the image acquisition medium, and thickness of artifacts. In this study, we evaluated the grayscale image obtained using GE's Computed Radiograhpy (CR) imaging system, the transmission characteristics of the X-ray source for each tree type (pine, chestnut, sawtooth oak, ginkgo) used in wooden Cultural Heritage, and the signal-to-noise ratio (SNR) and contrast. The GE's CR imaging were analyzed using the Duplex wire image quality indicator, line-pair gauges.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.55-78
• /
• 2011

The social impact of science and technology is increasing, the meaning of technology assessment is not small in modern society, Specially, the technology assesment(TA) has been institutionalized and performed by Korean administration and its official results has reflected directly in the S&T policy. Therefore, the technology assesment is a device that prepare the negative effects of S&T and the social controversy in advance. To select the target technology of technology assessment will be done carefully in various perspective and concerned with the characteristics of technology assessment emphasizing social assessment, the institutional system of selecting one technology in each year and the contents and methods of evaluation that are determined in accordance with technology characteristics. However, the method of selecting target technology in TA is mostly peformed by qualitative discussion and vote rather than by reflecting various opinion and understanding TA until now. In this paper, we developed the indicator has to be considered to select target technology for TA by using factor analysis. Developed indicator is consist of five factor, such as the need for social consensus and the size of social/cultural impact etc., and we weight each factor by using Analytic Hierarchy Process(AHP). Futhermore, we show the example how to applicate directly these indicator and weights to select target technology and suggest institutional application in TA. Though using developed indicator in this paper, we expect to select appropriate technology for institutional TA and the application of TA results in society and public policy can be strengthened.

• Research in Community and Public Health Nursing
• /
• v.13 no.3
• /
• pp.556-565
• /
• 2002

Due to the fact that nurses may deal with diverse populations in the work place, it is very important for then to maintain appropriate interpersonal relationships with clients. Nurses should maintain diverse types of relationships appropriately with patients with special needs and their families during crisis, other nursing colleagues and staff on the same team, clients in the school or work place as well as the community. In particular, a hospital is a society with a system and hierarchy, and the importance of interpersonal relationships is much more emphasized. In interpersonal relationships, it is very important for a person to communicate with others in an accurate manner, and when the communication is not achieved appropriately, the person may have troubles and experience distress and conflicts because of the inaccurate communication of thoughts. According to the findings of previous studies, nurses actually experience much distress in the work place because of the miscommunication that they have with others. The purpose of this study was to observe a correlation between Myers-Briggs Type Indicator and assertiveness behavior, and to exam the effects of assertiveness training on the assertiveness behavior and conflict management mode. The subjects of this study included 20 persons in the experimental group and 20 persons the in control group. Myers-Briggs Type Indicator was applied before the study. The assertiveness training group received six, 120 minutes sessions over a 3 week period. Pre-test on assertiveness behavior, Communication Conflict Inventory-General, Role Conflict Inventory- General, Conflict Management Mode was achieved for all the subjects prior to the training. Post-test was administered to all the subjects one week following the last session. The data were analyzed using SPSS PC program to obtain findings on mean. standard distribution, t-test, and Pearson correlation. The results are as follows: (1) Myers-Briggs Type Indicator Introvert/Extrovert was correlated to assertive behavior and avoid- response type conflict management mode. (2) The assertiveness training was correlated to assertiveness behavior, communication conflict degree, and avoid- response type conflict management mode. (3) The post-test scores between the training group and the control group were significantly different in assertiveness behavior and avoid-response type conflict management mode. It is suggested that more studies need to be done to differentiate the effects of Myers-Briggs Type Indicator and assertiveness training on assertiveness behavior and avoid-response type conflict management mode.

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.279-288
• /
• 2013

Objectives: Effectiveness and conditions of vapor-phase hydrogen peroxide (VPHP) system on decontamination of Geobacillus stearothermophilus(GS) spores, Escherichia coli (E.coli) and Enterobacteria phage felix01 (felix01) were determined. Methods: The VPHP system was designed to vaporize 35% (w/w) solution of hydrogen peroxide, continuously to inject and withdraw VPHP. The system and VHP 1000ED (Steris) were operated such that dehumidification and conditioning were initiated without samples in the chamber. Then the samples were loaded into and removed. Coupons (glass, anodizing, silicon, viton) with GS spores ($1{\times}10^6$ colony forming unit/mL [CFU/mL]), E.coli ($1{\times}10^7$ CFU/mL) and felix01 ($1{\times}10^7$ plaque forming unit/mL[PFU/mL]), and Biological Indicator (BI) with GS spores ($1{\times}10^6$ CFU/mL) on stainless steel coupons were used. The tested samples were sonicated and vortexed, and then were plated for enumeration, followed by incubation at $55^{\circ}C$, 24 hr for GS spores, and at $37^{\circ}C$, 24 hr for E.coli and felix01. BI analysis in broth culture was only qualitative. Results: The efficacy of the VPHP system on decontamination was almost equivalent to that of VHP 1000ED. The conditions for complete decontamination with the VPHP system was as follows: concentration; 700~450 ppm, relative humidity; approximately 55%, and temperature; $34{\sim}32^{\circ}C$. When comparing the decontamination efficiency among different kinds of coupons, glass was the most effective, however, all kinds of coupons were decontaminated completely after 60 min exposure in both systems. Conclusion: The VPHP system can be recommended as an alternative system for traditional system using ethylene oxide, formaldehyde or chlorine dioxide.