• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.257-264
• /
• 2011

In this study, we performed sensitivity study of the $217Plus^{TM}$ system model to various parameters. Specific attention was put to logistics model and its behavior has been examined in terms of non-component failure causes. We first briefly explained the $217Plus^{TM}$ methodology with system level failure rate evaluation. We then applied experimental designs with several failure causes as factors. We used an orthogonal array with three levels of each parameter. Our results indicate that cannot duplicate, induced, and wear-out causes have dominant effects on the system failures and design, parts, and system management have much less but a little strong effects. The results in this study not only figure out the behavior of the predicted failure rate as functions of failure causes but provide meaningful guidelines for practical applications.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.15-20
• /
• 2016

The optimal estimation of a general continuous-discrete system can be achieved through the solution of the Fokker-Planck equation and the Bayesian update. Due the high nonlinearity of the equation of motion of the system and the measurement model, it is necessary to linearize the both equation. To avoid linearization, the filter based on Fokker-Planck equation is designed. with the unscented transformation update mechanism, in which the associated Fokker-Planck equation was solved efficiently and accurately via discrete quadrature and the measurement update was done through the unscented transformation update mechanism. This filter based on the Direct Quadrature Moment of Method(DQMOM) and the unscented transformation update is applied to the bearing only target tracking problem. The proposed filter can still provide more accurate estimation of the state than those of the extended Kalman filter especially when measurements are sparse. Simulation results indicate that the advantages of the proposed filter based on the DQMOM and the unscented transformation update make it a promising alternative to the extended Kalman filter.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.17-22
• /
• 2004

In this paper, we implement an efficient MLC/PDL system for AWGN channels. In terms of the tradeoff between the hardware implementation and system performance, proposed algebra LDPC codes are optimized by the Gaussian approximation(GA) according to the rate of each level assigned by the capacity rule and chosen as the component code. System performance with Ungerboeck Partitioning(UP), Miked Partitioning(MP) and Gray Mapping(GM) of 8PSK are evaluated, respectively. Many results are presented in this paper; they can indicate that the proposed MLC/PDL system using optimized algebra LDPC codes with different code rate, capacity rule and Gray mapping(GM) can achieve the best performance.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.99-106
• /
• 2013

Thermal fatigue is a significant long-term degradation mechanism in nuclear power plants. In particular, as operating plants become older and life time extension activities are initiated, operators and regulators need screening criteria to exclude risks of thermal fatigue and methods to determine significant fatigue relevance. In general, the common thermal fatigue issues are well understood and controlled by plant instrumentation at fatigue susceptible locations. However, incidents indicate that certain piping system Tee connections are susceptible to turbulent temperature mixing effects that cannot be adequately monitored by common thermocouple instrumentations. Therefore, in this study thermal fatigue evaluation of piping system Tee-connections is performed using the fluid-structure interaction (FSI) analysis. From the thermal hydraulic analysis, the temperature distributions are determined and their results are applied to the structural model of the piping system to determine the thermal stress. Using the rain-flow method the fatigue analysis is performed to generate fatigue usage factors. The procedure for improved load thermal fatigue assessment using FSI analysis shown in this study will supply valuable information for establishing a methodology on thermal fatigue.

• STI Policy Review
• /
• v.4 no.1
• /
• pp.54-73
• /
• 2013

In a knowledge economy, accelerating the pace of knowledge building and the rapid acquisition of knowledge are keys to innovative development. However, the development of the commercialization of research results and formation of new start-up companies are often not as active as they should be with a lack of motivation and incentive being one of the contributing factors for the failure to take action. In Taiwan and Japan, the reason that widely advocated idea of industry-academia collaboration is to help advance the technological capabilities of research and development as well as produce economic benefit. The assistance rendered by the government during the transformation and the assessment of outcomes from entrepreneurial pursuits are key issues explored in this study. The results indicate that the network system in the national innovation system is important for entrepreneurship development. The domestic market of Taiwan is not as large as Japan and new entrepreneurs have to face global market challenges.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.11-17
• /
• 1996

The purpose of this experiment is to estabilish the sensitive and specific ELISA (enzyme linked immunosorbent assay) system for the detection of fish metallothionein (MT). Silver carp were injected with CA of 1-8mg/kg body wt. 4 times during 10 days. Silver carp was very tolerant species to CA. Cd induced MT in liver was seperated and purified by gel filtration chromatography and ion exchange chromatography and identified by spectrophotometry, native gel electrophoresis and western blot analysis. The rabbit antiserum was produced by immunizing rabbit with lyophilized MT, and the competitive ELISA system was estabilished for the detection of fish MT. In the present ELISA system, the detection limit was about 33 ng/ml. When this ELISA system was employed to determine the MT level in the supernatant sample of fish liver homogenate, the reaction curve showed a good parallel corelationship with the calibration curve over a certain dilution range. The results indicate that the competitive ELISA can be a useful tool for the detection of fish MT in the toxicological study and the evaluation of water pollution.

• Journal of the Korea Society for Simulation
• /
• v.9 no.4
• /
• pp.67-75
• /
• 2000

Often system analysts are interested in the estimation of percentile for system performance. For instance, in PERT network system, the percentile that the project. Typically the control variate method is used to reduce the variability of mean response using the correlation between the response and the control variates with a little additional cost during the course of simulation. In the same spirit, we apply this method to estimate the percentile of project completion time in PERT system, and evaluate the efficiency of the controlled estimator for its percentile.1 Simulation results indicate that the controlled estimators are more effective in reducing the variances of estimators than the simple estimators, however those tend to a little underestimate the percentiles for some critical values. We need more simulation experiments to examine such a kind of bias problem. We expect this research presents a step forward in the area of variance reduction techniques of stochastic simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.156-160
• /
• 2008

A localization system to estimate the position as well as movement direction of mobile robots is proposed in this paper. This system implements a camera fixed on a robot and color patches evenly distributed and mounted on the planar ceiling. Different permutations of patch colors code information about robot localization. Thus, extraction of color information from patch images leads to estimation of robot position. Additionally, simple geometric indicators are combined with patch colors to estimate robot's movement direction. Since only the distribution of patch colors has to be known, the analysis of patch images to is relatively fast and simple. The proposed robot localization system has been successfully tested for navigation of sample mobile robot. Obtained test results indicate the robustness and reliability of proposed technique for robot navigation.

• Journal of Drive and Control
• /
• v.14 no.3
• /
• pp.32-39
• /
• 2017

In this study, a mathematical model of the pneumatic part in a gas blow-down system is proposed. The mathematical model consists of four major parts: pressure vessel, reservoir, pressure regulator and pipe-line. To ensure accuracy in long-time simulations, heat transfer between gas and pressure vessel is considered. The model is validated by comparing simulation results with experimental data. Experiments are conducted on the ground, where free convection can be assumed. Simulation results indicate the proposed model can accurately describe behavior of a gas blow-down system. Therefore, it may be used for design and analysis of similar systems with a slight modification.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.60-64
• /
• 2010

The purpose of this study if to prevent dangerous accident of the overthrow of the tower crane in summer's hurricane. We develop the SMS in order to give automatic alarm system to operator within the dangerous range and to give a information of the exactly slope in the real time. The slope value of the tower crane is compose of direction, pitch by the front and rear, roll by the right and left and synthesis by the its pitch and roll. Especially, the synthesis eliminate the effect of the wall tie or wire bracing. So, this value should correctly indicate the actual slope. In this study, more applying field test should be applied with the SMS. In the future, a more measurement device can be applied to, and be able to feed more alarm criteria for the review of the risk in the field.