• 제목/요약/키워드: Indian design

검색결과 348건 처리시간 0.033초

Estimation of response reduction factor of RC frame staging in elevated water tanks using nonlinear static procedure

  • Lakhade, Suraj O.;Kumar, Ratnesh;Jaiswal, Omprakash R.
    • Structural Engineering and Mechanics
    • /
    • 제62권2호
    • /
    • pp.209-224
    • /
    • 2017
  • Elevated water tanks are considered as important structures due to its post-earthquake requirements. Elevated water tank on reinforced concrete frame staging is widely used in India. Different response reduction factors depending on ductility of frame members are used in seismic design of frame staging. The study on appropriateness of response reduction factor for reinforced concrete tank staging is sparse in literature. In the present paper a systematic study on estimation of key components of response reduction factors is presented. By considering the various combinations of tank capacity, height of staging, seismic design level and design response reduction factors, forty-eight analytical models are developed and designed using relevant Indian codes. The minimum specified design cross section of column as per Indian code is found to be sufficient to accommodate the design steel. The strength factor and ductility factor are estimated using results of nonlinear static pushover analysis. It was observed that for seismic design category 'high' the strength factor has lesser contribution than ductility factor, whereas, opposite trend is observed for seismic design category 'low'. Further, the effects of staging height and tank capacity on strength and ductility factors for two different seismic design categories are studied. For both seismic design categories, the response reduction factors obtained from the nonlinear static analysis is higher than the code specified response reduction factors. The minimum dimension restriction of column is observed as key parameter in achieving the desired performance of the elevated water tank on frame staging.

Influence of Food Allowance on Nutrient Utilization of Oat (Avena sativa) Hay by Goats and Feeding Value of Leftovers from High Levels of Offer in Sheep

  • Dutta, N.;Sharma, K.;Hasan, Q.Z.;Pathak, N.N.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권5호
    • /
    • pp.723-727
    • /
    • 1999
  • Two experiments were conducted to determine the effect of feeding levels on intake and nutrient utilization of oat (Avena sativa) hay (OH) by goats and potential feeding value of leftovers from high levels of offer in sheep. In experiment 1, the goats (15) were offered OH at three levels of feeding to give leftovers of about 20% (T-1), 35% (T-2) and 50% (T-3) of DM offered. A marked effect of refusal rate of OH on intake and digestibility of nutrients was evident. Allowing selective consumption at higher levels (T-2 and T-3), the intake of DCP and TDN from OH was found not only to meet the maintenance requirement but provided surplus nutrients for moderate production. In experiment 2, Sheep (3) were offered one of the three dietary treatments viz OH, refusals left uneaten by goats in T-2 and T-3 (OHR) and 3% urea treated oat hay refusals (UTR) in a $3{\times}3$ latin square design. Though the potential feeding value of leftovers (OHR and UTR) was lower than OH, the results confirm the possibility of their effective use. It was concluded that feeding above the conventional ad libitum level could be an alternative to improve the performance of ruminants fed feeds like oat hay. The potential impact of the strategy would, however, depend on the effective reutilization of leftovers for feeding other animals.

Effect of Partial Replacement of Dietary Protein by a Leaf Meal Mixture Containing Leucaena leucocephala, Morus alba and Azadirachta indica on Performance of Goats

  • Patra, A.K.;Sharma, K.;Dutta, Narayan;Pattanaik, A.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권12호
    • /
    • pp.1732-1737
    • /
    • 2002
  • This study was conducted to examine the effect of Leucaena leucocephala-Morus alba-Azadirachta indica (2:1:1) based leaf meal mixture as nitrogen source to partially replace (50%) soybean meal in conventional supplements on the performance of goats. Twelve non-descript female goats were divided into two equal groups in a completely randomized design to receive either the leaf meal mixture based supplement (LMAM) or soybean meal incorporated concentrate (SBM) and wheat straw for ad libitum intake for a two month period. The goats given LMAM and SBM concentrate had similar dry matter intake ($50.2{\pm}1.67g/kg\;W^{0.75}$) and nutrient digestibility. Nitrogen intake and its faecal and urinary excretion were similar irrespective of diets. The balance of nitrogen was positive and comparable ($1.63{\pm}0.08g/d$) in both dietary treatments. The plane of nutrition on both diets was comparable and the digestible crude protein and total digestible nutrients values of the composite diets offered did not differ significantly between the dietary supplements. The serum concentration of enzymes alanine aminotransferase and aspartate aminotransferase were statistically similar in both the groups, while haemoglobin and serum urea levels were significantly (p<0.05) higher in LMAM and SBM treatments, respectively. It was concluded that the leaf meal mixture of Leucaena leucocephala-Morus alba-Azadirachta indica could be used as a vegetable protein supplement to wheat straw based diet of goats.

Bladder Recovery Patterns in Patients with Complete Cauda Equina Syndrome: A Single-Center Study

  • Reddy, Ashok Pedabelle;Mahajan, Rajat;Rustagi, Tarush;Chhabra, Harvinder Singh
    • Asian Spine Journal
    • /
    • 제12권6호
    • /
    • pp.981-986
    • /
    • 2018
  • Study Design: Retrospective case series. Purpose: Cauda equina syndrome (CES) is associated with etiologies such as lumbar disc herniation (LDH) and lumbar canal stenosis (LCS). CES has a prevalence of 2% among patients with LDH and exhibits variable outcomes, even with early surgery. Few studies have explored the factors influencing the prognosis in terms of bladder function. Therefore, we aimed to assess the factors contributing to bladder recovery and propose a simplified bladder recovery classification. Overview of Literature: Few reports have described the prognostic clinical factors for bladder recovery following CES. Moreover, limited data are available regarding a meaningful bladder recovery status classification useful in clinical settings. Methods: A single-center retrospective study was conducted (April 2012 to April 2015). Patients with CES secondary to LDH or LCS were included. The retrieved data were evaluated for variables such as demographics, symptom duration, neurological symptoms, bladder symptoms, and surgery duration. The variable bladder function outcome during discharge and at follow-up was recorded. All subjects were followed up for at least 2 years. A simplified bladder recovery classification was proposed. Statistical analyses were performed to study the correlation between patient variables and bladder function outcome. Results: Overall, 39 patients were included in the study. Majority of the subjects were males (79.8%) with an average age of 44.4 years. CES secondary to LDH was most commonly seen (89.7%). Perianal sensation (PAS) showed a significant correlation with neurological recovery. In the absence of PAS, bladder function did not recover. Voluntary anal contraction (VAC) was affected in all study subjects. Conclusions: Intactness of PAS was the only significant prognostic variable. Decreased or absent VAC was the most sensitive diagnostic marker of CES. We also proposed a simplified bladder recovery classification for recovery prognosis.

Issues in offshore platform research - Part 1: Semi-submersibles

  • Sharma, R.;Kim, Tae-Wan;Sha, O.P.;Misra, S.C.
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제2권3호
    • /
    • pp.155-170
    • /
    • 2010
  • Availability of economic and efficient energy resources is crucial to a nation's development. Because of their low cost and advancement in drilling and exploration technologies, oil and gas based energy systems are the most widely used energy source throughout the world. The inexpensive oil and gas based energy systems are used for everything, i.e., from transportation of goods and people to the harvesting of crops for food. As the energy demand continues to rise, there is strong need for inexpensive energy solutions. An offshore platform is a large structure that is used to house workers and machinery needed to drill wells in the ocean bed, extract oil and/or natural gas, process the produced fluids, and ship or pipe them to shore. Depending on the circumstances, the offshore platform can be fixed (to the ocean floor) or can consist of an artificial island or can float. Semi-submersibles are used for various purposes in offshore and marine engineering, e.g. crane vessels, drilling vessels, tourist vessels, production platforms and accommodation facilities, etc. The challenges of deepwater drilling have further motivated the researchers to design optimum choices for semi-submersibles for a chosen operating depth. In our series of eight papers, we discuss the design and production aspects of all the types of offshore platforms. In the present part I, we present an introduction and critical analysis of semi-submersibles.

Reliability analysis of slopes stabilised with piles using response surface method

  • Saseendran, Ramanandan;Dodagoudar, G.R.
    • Geomechanics and Engineering
    • /
    • 제21권6호
    • /
    • pp.513-525
    • /
    • 2020
  • Slopes stabilised with piles are seldom analysed considering uncertainties in the parameters of the pile-slope system. Reliability analysis of the pile-slope system quantifies the degree of uncertainties and evaluates the safety of the system. In the present study, the reliability analysis of a slope stabilised with piles is performed using the first-order reliability method (FORM) based on Hasofer-Lind approach. The implicit performance function associated with the factor of safety (FS) of the slope is approximated using the response surface method. The analyses are carried out considering the design matrices formulated based on both the 2k factorial design augmented with a centre run (2k fact-centred design) and face-centered cube design (FCD). The finite element method is used as the deterministic model to compute the FS of the pile-slope system. Results are compared with the results of the Monte Carlo simulation. It is observed that the optimum location of the row of piles is at the middle of the slope to achieve the maximum FS. The results show that the reliability of the system is not uniform for different pile configurations, even if the system deterministically satisfies the target factor of safety (FSt) criterion. The FSt should be selected judiciously as it is observed that the reliability of the system changes drastically with the FSt level. The results of the 2k fact-centred design and FCD are in good agreement with each other. The procedure of the FCD is computationally costly and hence the use of 2k fact-centred design is recommended, provided the response of the system is sufficiently linear over the factorial space.

Estimation of Rumen Microbial Protein Supply Using Urinary Purine Derivatives Excretion in Crossbred Calves Fed at Different Levels of Feed Intake

  • Singh, M.;Sharma, K.;Dutta, N.;Singh, P.;Verma, A.K.;Mehra, U.R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권10호
    • /
    • pp.1567-1574
    • /
    • 2007
  • A study was carried out to study the response of total purine derivatives (PD) excretion in urine to determine microbial N (MN) supply at four fixed levels of feed intake (namely 95, 80, 60 and 40% of voluntary intake). The crossbred (CB) calves were allocated according to a $4{\times}4$ Latin Square Design and fed wheat straw and concentrate (1:1). The rate of PD excretion (mmol/d) as a linear function of feed intake was 15.85/kg DMI and 20.12/kg DOMI. Based on the endogenous and PD excretion rates obtained in this study, a relationship between daily urinary PD excretion (Y, mmol) and daily microbial protein supply (X, mmol) was developed for crossbred calves as Y = 0.83X+0.296 kg $W^{0.75}$. The derived microbial N values using this equation differed (p<0.001) among the 4 groups and was the highest in L-95 followed by L-80, L-60 and L-40. The relationship between urinary nitrogen loss (Y, g/d) and DOMI (X, kg/d) was established as: Y = 6.038X+21.753 ($r^2$ = 0.663, p<0.01). When urinary excretion of PD (Y, mmol/d) was plotted against intake of DM and DOM (X, kg/d), the equations obtained were: Y = 7.1711X+8.674 ($r^2$ = 0.889, p<0.01) and Y = 12.434X+7.683 ($r^2$ = 0.896, p<0.01), respectively. The proportional contribution of allantoin and uric acid to total PD remained stable irrespective of level of feed intake. Similarly, urinary excretion of creatinine did not differ (p>0.05) between animals fed at different levels. The MN supply was the highest to animals at intake levels L-95, and decreased linearly with corresponding decrease in feed intake. However, the MN supply when expressed per kg DOMI remained statistically (p>0.05) similar irrespective of level of intake. The results revealed that the excretion of urinary purine derivatives were positively correlated with the level of feed intake as well as rumen microbial supply and thus it could be a good indicator for measuring the microbial protein supply and nutritional status of animals.

Effect of different fat and protein levels in calf ration on performance of Sahiwal calves

  • Sharma, Bharti;Nimje, Prapti;Tomar, S.K.;Dey, Dipak;Mondal, Santu;Kundu, S.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권1호
    • /
    • pp.53-60
    • /
    • 2020
  • Objective: The current study was carried out to examine the response of different levels of fat and protein in calf starter on nutrient utilisation, nitrogen metabolism, weight gain, blood parameters, and immunity level in pre-ruminant calves. Methods: Twenty four calves (5 days old) were divided into six groups in a 2×3 factorial design, with two levels of fat (10% and 14%) and three levels of protein (18%, 21%, and 24%). The calves were kept in individual pens for 120 days and fed with whole milk (1/10th of body weight) and calf starter ad-libitum. Daily dry matter intake was recorded; whereas body weight was taken on fortnightly basis to calculate average daily gain. During the growth trial blood samples were collected at 30 days interval to estimate blood glucose, albumin, total protein, total leucocyte count, total immunoglobulins and immunoglobulin G levels. A metabolic trial of seven days was carried out to find out the digestibility of different nutrients. Results: The dry matter intake was reduced (p<0.05) with higher fat and protein levels whereas feed conversion efficiency was improved (p<0.05) with higher protein level. Different levels of fat and protein in calf ration did not affect average daily gain in calves. The dry matter, organic matter, and crude protein digestibility were significantly (p<0.01) higher with increased level of protein. The nitrogen retention was also significantly higher (p<0.05) at 24% protein level, similarly the total immunoglobulin was significantly (p<0.05) high in higher protein fed groups, showed better immunity. Conclusion: The present finding suggested that 10% fat and 18% protein level of calf starter could be used in Sahiwal calves for optimum performance in terms of weight gain and immunity.

Bending, buckling and vibration analyses of nonhomogeneous nanotubes using GDQ and nonlocal elasticity theory

  • Pradhan, S.C.;Phadikar, J.K.
    • Structural Engineering and Mechanics
    • /
    • 제33권2호
    • /
    • pp.193-213
    • /
    • 2009
  • In this paper structural analysis of nonhomogeneous nanotubes has been carried out using nonlocal elasticity theory. Governing differential equations of nonhomogeneous nanotubes are derived. Nanotubes include both single wall nanotube (SWNT) and double wall nanotube (DWNT). Nonlocal theory of elasticity has been employed to include the scale effect of the nanotubes. Nonlocal parameter, elastic modulus, density and diameter of the cross section are assumed to be functions of spatial coordinates. General Differential Quadrature (GDQ) method has been employed to solve the governing differential equations of the nanotubes. Various boundary conditions have been applied to the nanotubes. Present results considering nonlocal theory are in good agreement with the results available in the literature. Effect of variation of various geometrical and material parameters on the structural response of the nonhomogeneous nanotubes has been investigated. Present results of the nonhomogeneous nanotubes are useful in the design of the nanotubes.