• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.132-139
• /
• 2011

We investigate theoretically the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) on multi-channel subcarrier multiplexed (SCM) optical transmission systems in terms of the detected RF carrier power and SPM-induced power gain after transmission over single-mode fiber (SMF) links. According to the calculated power gain due to the SPM effect at the transmission distance of P3dB using the detected radio-frequency (RF) carrier power after photo-detection, the power gain is significantly degraded with large optical modulation index (OMI), small SCM channel spacing, and large fiber launching power because of the increased interaction between subcarrier channels. The nonlinear phase shift due to linear and nonlinear fiber characteristics is investigated to explain these results in detail. The numerical simulation results show that the OMI per SCM channel has to be smaller than 10 % for the fiber launching power of 10 dBm to guarantee prevention of SPM-induced power gain degradation below 0.5 dB for the SCM system with the channel spacing of 100 MHz. This result is expected to be utilized for the optical transmission systems using the SCM technology in future radio-over-fiber (RoF) networks.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• 한국응용곤충학회지
• /
• 제40권2호
• /
• pp.105-109
• /
• 2001

귤응애의 예찰방법을 개발하기 위하여 제주지역의 온주밀감원에서 귤응애 분산형태에 대해 2개년(1999~2000년)에 걸쳐 잎 표본에 대하여 각 조사일에 평균밀도를 조사하였다. Taylor's power law와 Iwao's patchiness regression을 이용하여 분산지수를 비교하였으며, 잎 표본 조사에서는 일반적으로 Taylor's power law가 Iwao's patchiness regression보다 평균-분산 관계를 더 잘 나타내었다. Taylor's power law의 기울기와 절편은 조사한 포장 간에 차이가 없었으며, 여기에서 얻어진 상수값을 이용하여 잎 표본 조사에 의한 귤응애 약 .성충에 대한 고정정확도수준에서의 표본조사법을 개발하였다. 이 조사법에 대해 resampling 기법을 이용하여 독립된 4개의 조사자료를 이용하여 분석한 결과 실질 고정정확도(D)값이 요구되는 D값보다 항상 낮았으며, 나무당 귤응애 밀도가 8마리 이상에서 필요한 조사 나무수는 18주보다 작았다.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.449-456
• /
• 2007

Dispersion coefficient preprocessing schemes have been examined to improve plume dispersion model performance in complex coastal areas. The performances of various schemes for constructing the sigma correction order were evaluated through estimations of statistical measures, such as bias, gross error, R, FB, NMSE, within FAC2, MG, VG, IOA, UAPC and MRE. This was undertaken for the results of dispersion modeling, which applied each scheme. Environmental factors such as sampling time, surface roughness, plume rising, plume height and terrain rolling were considered in this study. Gaussian plume dispersion model was used to calculate 1 hr $SO_2$ concentration 4 km downwind from a power plant in Boryeung coastal area. Here, measured data for January to December of 2002 were obtained so that modelling results could be compared. To compare the performances between various schemes, integrated scores of statistical measures were obtained by giving weights for each measure and then summing each score. This was done because each statistical measure has its own function and criteria; as a result, no measure can be taken as a sole index indicative of the performance level for each modeling scheme. The best preprocessing scheme was discerned using the step-wise method. The most significant factor influencing the magnitude of real dispersion coefficients appeared to be sampling time. A second significant factor appeared to be surface roughness, with the rolling terrain being the least significant for elevated sources in a gently rolling terrain. The best sequence of correcting the sigma from P-G scheme was found to be the combination of (1) sampling time, (2) surface roughness, (3) plume rising, (4) plume height, and (5) terrain rolling.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.55-61
• /
• 2013

본 논문에서는 통신 채널에서 발생되는 찌그러짐과 잡음의 영향을 최소화하기 위하여 사용되는 S-MMA 적응 등화 알고리즘에서 Slice 가중치에 따른 성능을 비교하였다. 기존의 MMA 알고리즘에서는 등화기의 출력 신호와 송신 신호의 dispersion 상수만을 이용하지만, S-MMA에서는 등화기 출력 신호와 dispersion 상수외에 결정 장치의 출력 신호를 slice 상수만큼 고려하여 채널의 진폭과 위상 찌그러짐을 동시에 보상할 수 있다. 이때 slice 가중치가 적응 등화 알고리즘의 성능에 미치는 영향을 컴퓨터 시뮬레이션을 통해 확인하며, 성능 지수로는 등화기 출력 신호 성상도, 수렴 특성을 나타내는 잔류 isi, 최대 찌그러짐, MSE와 채널의 신호대 잡음비에 따른 SER을 사용하였다. 시뮬레이션 결과 slice 가중치가 적으면 잔류isi, 최대 찌그러짐과 MSE 성능이 우월하며, 가중치가 큰 경우 SER 성능이 우월함을 확인하였다.

• 통상정보연구
• /
• 제18권1호
• /
• pp.235-258
• /
• 2016

본 연구는 산업연관표를 중심으로 2011년~2013년 기간의 실측표기준의 투입산출물표(Input-output Table)를 사용하여 동 기간의 국내 해외직접투자(FDI) 유입액을 한국표준산업분류(KSIC 30부문)기준으로 재분류 및 통합하여 적용한 결과 3개년 평균 국내 외국인직접투자 유입액은 15조 3,000억원이고, 평균총생산유발액은 45조 8,000억원으로 추계되었다. 국내 외국인직접투자 유입의 특징은 감응도계수 및 영향력계수가 큰 산업인 화학제품, 전기 및 전자기기, 금속제품에 편중되어 있다. 특히 중간재로 활용되는 감응도계수가 큰 산업에 국내 외국인직접투자 유치가 이루어지면 국내 경제적 산업파급효과가 큰 것으로 나타난다.

• 한국콘텐츠학회논문지
• /
• 제13권1호
• /
• pp.147-155
• /
• 2013

본 연구의 목적은 공연산업의 경제적 파급 효과를 분석하는데 있다. 연구분석을 위해 한국은행의 2009년 산업연관표를 이용하여 연극, 음악 및 기타 예술(390 부문)만을 공연산업으로 한정하고 새로이 공연 산업연관표를 작성하여 공연산업의 경제적 파급효과를 분석하였다. 연구 결과, 공연산업의 총생산유발액은 391.6조원, 소득유발액은 65.1조원, 생산세유발액은 총 16.3조원으로 나타났다. 특히 공연산업의 생산유발계수는 1,387, 감응도 계수 0.020, 영향력계수 0.025, 부가가치유발계수 0.662, 소득유발계수 0.455, 생산세유발계수 0.046 그리고 노동유발계수 0.010 등으로 나타났다.

• Spatial Information Research
• /
• 제20권6호
• /
• pp.69-76
• /
• 2012

본 연구에서는 산업연관분석을 통해 공간정보산업의 특징을 도출하였다. 이를 위하여 공간정보산업을 재분류하고 이에 맞게 산업연관표를 수정하여 공간정보산업을 분석하였으며 생산유발계수, 영향력계수, 감응력계수를 도출하였다. 그 결과 공간정보산업은 생산유발효과는 작으나 전방연쇄효과가 매우 큰 산업으로 확인되었다. 이를 기반으로 공간정보산업 육성을 위한 정책의 방향성을 '산업생태계 조성, 고도화와 활용도 향상 병행, 장기적 관점 수립'으로 제시하였다.