• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Korean Journal of Biological Psychiatry
• /
• v.19 no.1
• /
• pp.38-44
• /
• 2012

Objectives : QT interval prolongation and dispersion known as indicators of an increased risk for ventricular arrhythmias and sudden death have been reported to be prolonged in patients with anorexia nervosa. The aims of this study were to compare conduction abnormalities in Korean patients with anorexia nervosa and bulimia nervosa, and to examine its relation with clinical and laboratory factors. Methods : We retrospectively examined 45 women with anorexia nervosa and 75 women with bulimia nervosa who were assessed by 12-lead electrocardiogram at baseline. QT interval and corrected QT interval, QT dispersion of the difference between the longest and shortest QT intervals, and abnormal U wave were measured for conduction abnormalities. Results : QT interval was significantly longer in patients with anorexia nervosa compared with those with bulimia nervosa. There were no differences in QTc (Corrected QT), QTd (QT dispersion) and abnormal U wave between patients with anorexia nervosa and those with bulimia nervosa. QTd was significantly correlated with the lowest ever lifetime body mass index ($kg/m^2$) as well as the serum amylase level in patients with anorexia nervosa. Conclusions : These results suggest some conduction abnormalities reported in patients with anorexia nervosa are also found in patients with bulimia nervosa. It appears that severity of weight loss and purging behavior could affect the cardiac arrhythmia in patients with eating disorders. Appropriate attention should be paid to cardiac involvement in patients with eating disorders.

• Korean journal of applied entomology
• /
• v.40 no.2
• /
• pp.105-109
• /
• 2001

Dispersion pattern of the citrus red mite (CRM), Panonychus citri (McGregor) was determined to develop a monitoring method in the satsuma mandarin fields, Citrus unshiu L., in Jeju-do, during 1999 and 2000. CRM population was sampled by collecting leaves. Taylor's power law provided better description of mean-variance relationship for the dispersion indices compared to Iwao's patchiness regression. Slopes and intercepts of Taylor's power law from leaf samples did not differ among surveyed groves. Fixed-precision levels (D) of a sequential sampling plan were developed using Taylor's power law parameters generated from all motile stages of CRM in leaf sample. This sampling plan for leaf sample estimate was tested with resampling validation for sampling plan using 4 independent data sets. Resampling simulation analysis demonstrated that actual fixed-precision level values were better than desired D values of 0.20, 0.25 and 0.30. Required numbers for tree sampling at the density of more than 7 mites per tree were fewer than 18.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.438-449
• /
• 2020

This study is to improve the method of calculating the risk of liability that arise from release and dispersion of chemicals outside the plant in process industries such as chemical and petrochemical plants. To achieve this goal, the correlation factors with the risk of chemical release accident is derived by simulating release and dispersion of substances (14 types) designated by Ministry of Environment as preparation for accident, analyzing the cases of chemical release and effects of plant life damage. The method of calculating chemical liability risk was modified and supplemented based on the results obtained from the study. The correlation coefficient between the probit value of 14 chemical types and the liability risk by EURAM (European Union Risk Ranking Method) was -0.526, while the correlation coefficient with the modified chemical release accident risk was 0.319. Thus, the value from modified method shows that they appear to be correlated. According to modified calculating methodology, the correlation between ERPG-2 value and liability risk of 97 chemical types was -0.494 which is 19 times higher than existing liability risk correlation as absolute value. And the correlation coefficient of corrosion risk was 0.91. The standardized regression coefficients (β) value of correlation factors that affected the increase and decrease of risk were derived in order of Corrosion Index(0.713), ERPG-2 (0.400) and NFPA Health Index (0.0680) by values. It is expected that these findings this study result will also enable the calculation of reasonable chemical release liability risk for existing and new chemical, and will help use them as quantitative liability risk management indicators for chemical plant site.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.223-229
• /
• 2010

We investigated the effects of processing geometry of silica-filled isobutylene-isoprene rubber (IIR) compounds on its mechanical properties and silica dispersion, using a two roll mill and an internal mixer (banbury mixer). The compound processed with the two roll mill showed the longer induction time ($t_2$), higher maximum torque ($T_{max}$), and better silica dispersion than the compound processed with the internal mixer; however, showed slightly the lower cure index ($t_{90}$). The mechanical properties (hardness, 300% modulus, tensile strength, elongation) of the compound processed with two roll mill were higher than compound done with the internal mixer.

• Journal of Adhesion and Interface
• /
• v.18 no.3
• /
• pp.109-117
• /
• 2017

Poly(N-vinyl carbazole) (PVK) homopolymer, poly(4-vinylpyridine) (PVP) homopolymer, and PVK-b-PVP block copolymer were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and the polymers were used to prepare non-aqueous graphene dispersions with four different solvents, ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), and tetrahydrofuran (THF). $^1H-$ and $^{13}C-NMR$ spectroscopy, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC) were carried out to confirm the chemical structure of the polymers. Stability of graphene dispersions was measured by on-line turbidity measurement. Time-dependent Turbiscan Stability Index (TSI) values were interpreted in terms of surface tension (${\sigma}$) and solubility parameter (${\delta}$) among solvents, polymers, and graphene. It was confirmed that the solubilities of polymer and surface tension between solvent and graphene affected the dispersion stability of graphene. PVK-b-PVP block copolymer could effectively maintain the low TSI values of graphene dispersions in ethanol and THF, which have been known as poor solvents for graphene dispersions. It can also be noted that DCM shows good dispersion stability comparable to NMP, which has been known as the best solvent for graphene dispersion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.890-898
• /
• 2022

Dispersion of suspended sediment, caused by coastal and marine development, is a key item in assessing marine environmental impact as it adversely affects marine life by increasing the level of turbidity and decreasing the amount of sunlight in seawater. However, its estimation has not been reliable because of the absence of a standard for the data measurement and divergent approaches to the impact assessment. In this study, we examined the estimation models from 58 Marine Environmental Impact Statements (MEISs, 2012-2014) to identify the gaps in the assessment and devise ways of improving the estimation. We developed four index items-grid system; unit load, particle size, and settling velocit-to evaluate their reliability in the estimation. The mean reliability score of each index was overall low-25 for grid system, 60 for unit load, 34 for particle size, and 17 for settling velocity. To ensure high reliability, it is important to develop a standard guideline that defines precise measurement of suspended sediment for unit load and settling velocity by particle size, followed by a grid system with compatible size for modelling. This can improve the estimation and thus underlie coherent impact assessment of suspended sediment dispersion on marine environment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.3
• /
• pp.170-174
• /
• 2008

The measurement of performance of a process considering both the location and the dispersion of information about the process is referred to as the process capacity indices (PCIs) of interest, $C_{pk}$. This information is presented by the mean and standard deviation of the producing process. Linguistic variables are used to express the evaluation of the quality of a product. Consequently, $C_{pk}$ is defined with fuzzy numbers. Lee [Eur. J. Oper. Res. 129(2001) 683-688] constructed the definition of the $C_{pk}$ index estimation presented by fuzzy numbers and approximated its membership function using the "min" - norm based Zadeh's extension principle of fuzzy sets. However, Lee's result was shown to be invalid by Hong [Eur. J. Oper. Res. 158(2004) 529-532]. It is well known that $T_w$ (the weakest t-norm)-based addition and multiplication preserve the shape of L-R fuzzy numbers. In this paper, we allow that the fuzzy numbers are of L-R type. The object of the present study is to propose a new method to calculate the $C_{pk}$ index under $T_w-based$ fuzzy arithmetic operations.

• Steel and Composite Structures
• /
• v.47 no.5
• /
• pp.633-644
• /
• 2023

Taking a look at the previously published papers, it is revealed that there is a porosity index limitation (around 0.35) for the mechanical behavior analysis of the functionally graded porous (FGP) structures. Over mentioned magnitude of the porosity index, the elastic modulus falls below zero for some parts of the structure thickness. Therefore, the current paper is presented to analyze the vibrational behavior of the FGP Timoshenko beams (FGPTBs) using a novel refined formulation regardless of the porosity index magnitude. The silica aerogel foundation and various hydrothermal loadings are assumed as the source of external forces. To obtain the FGPTB's properties, the power law is hired, and employing Hamilton's principle in conjunction with Navier's solution method, the governing equations are extracted and solved. In the end, the impact of the various variables as different beam materials, elastic foundation parameters, and porosity index is captured and displayed. It is revealed that changing hygrothermal loading from non-linear toward uniform configuration results in non-dimensional frequency and stiffness pushing up. Also, Al - Al2O3 as the material composition of the beam and the porosity presence with the O pattern, provide more rigidity in comparison with using other materials and other types of porosity dispersion. The presented computational model in this paper hopes to help add more accuracy to the structures' analysis in high-tech industries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.181-185
• /
• 1993

The effects of concentrations (6~9%), heating temperatures (80, 85, 90 and 95$^{\circ}C$) and heating methods (continuous, method A and instantaneous, method B) on the flow properties of cowpea flour (air-dried sediment) at 6$0^{\circ}C$ were studied. The gelatinized cowpea flour dispersions by method B had higher values of yield stress and consistency index but lower value of flow behavior index compared to those values of method A. The log values of consistency index were positively correlated with the concentration and heating temperature for both methods. The rate of increase in the consistency index value by method B at the same concentration was greater in all heating temperatures than that by method A.