• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.57-63
• /
• 2006

The purpose of this study is to correct data on 3 intersection ranging from Kwangchun INT. to Nongsung INT. by the means of VTR recording and site survey and to measure the responsiveness of performance index by diversifying the platoon dispersion factor in signal progression simulation. The results are as follows : 1. The value of platoon dispersion factor was 0.28-0.33. The value in up stream is lower than that of in down stream even on the same intersection. 2. The platoon index showed big changes, though performance index didn't according to platoon dispersion factor. Therefore the value of platoon dispersion factor which is inner variable in T7F can be fixed for 0.34. 3. There was only little divergence in performance index changes according to platoon dispersion factor in designing the progression or T7F model.

• International Commerce and Information Review
• /
• v.18 no.1
• /
• pp.235-258
• /
• 2016

This study is to arrange the amount of foreign direct investment(FDI) inflow into the country between 2011 and 2013, using the Input-output Table on the basis of the bench-mark table of the same period, based on the Industry Relation Table. As a result, the average amount of FDI inflow of the three years was estimated 15.3 trillion won, and the average gross product inducement amount 45.8 trillion won. The characteristic of FDI inflow is that it is weighted in the industries with the high index of the sensitivity of dispersion and the high index of the power of dispersion, such as chemical products, electric and electronic equipment and metal products. It is especially anticipated to attract FDI to the industry with the high index of the sensitivity of dispersion used as the intermediary product.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.343-357
• /
• 2018

Algorithm which can analyze the slope failure behavior utilizing the comprehensive information of the dense point of joint poles and the joint set orientations, both of which are obtained statistically, and the defect pattern of pole distribution has been developed. This method overcomes the potential incorrectness of the hemispheric projection method utilizing the joint set orientations only and also enhances the reliability of slope failure analysis. To this end a method capable of calculating the joint dispersion index directly from the joint pole distribution, instead of contour map, has been devised. The representative orientations for the slope failure analysis has been determined by considering the number and orientations of cone angle-dependent joint sets as well as the joint dispersion index. By engaging these representative orientations to the hemispheric projection analysis more reliable slope failure examination has been carried out. Sensitivity analysis for the potentially unstable slope of plane failure mode has been performed. Significance of joint strength index and the external seismic loading on the slope stability has been fully analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.163-168
• /
• 2023

In this paper, a novel platform for chemical sensing and biosensing is presented. The working principle is based on the coupling efficiency and interference properties of optical directional coupler (DC) and multimode interference coupler (MMIC). It has been realized using planar technology to allow integration on a silicon substrate. Firstly, the dispersion curves of DC and MMIC is described, and the design specification of an optimized slot optical waveguide to increase waveguide sensitivity is selected. Next, the sensor response to the refractive index change of sensing analyte is numerically simulated. The numerical results reveal that high effective index change per refractive index unit (RIU) change of analyte is obtained, and the sensitivity can be tuned using the DC and MMIC design technique.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.227-250
• /
• 1999

The reproducibility of successive growth of Bi12TiO20(BTO) single crystals using a top-seeded solution growth (TSSG) pulling method was evaluated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established experimentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasize that a starting solution, with a 10.0~10.1 mol% TiO2 concentration, results in large single crystals with a highly homogeneous lattice constant of within $\pm$1x10-4$\AA$, when the solidified fraction of the grown crystal is less than about 45%. A wavelength dispersion of refractive index was measured for the first time, an it was verified that the refractive index of BTO is larger than that of BSO(Bi12TiO20), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.147-155
• /
• 2013

The purpose of this study is to analyze how much performance industry contribute to national economy by measuring economic effects of performance industry. To achieve the purpose of the study, the study uses an performance industry(theater, music and other arts, 390 sectors) Input-Output Table of yaer 2009 of korea bank. The results shows that performance industry induce 391.6 trillion won in the national production, 65.1 trillion won in the income inducement, 16.3 trillion won in the tax inducement. Especially the performance industry shows that production inducement coefficient is 1,387, Index of the power of dispersion is 0.020, index of the sensitivity of dispersion is 0.025, value-added inducement coefficient is 0.662, income inducement coefficient is 0.455, tax inducement coefficient is 0.046 and employment inducement coefficient is 0.010.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.69-76
• /
• 2012

In this study, we derived the characteristics of the geo-spatial information industry by using input-output analysis. For this analysis, we classified the geo-spatial information industry and reorganized the input-output table. And we derived the production inducement coefficient, index of the power of dispersion and index of the sensitivity of dispersion in the geo-spatial information industry. We confirmed that geo-spatial information industry has a small production inducement coefficient and a great forward linkage effect. Based on these facts, we suggested the strategy direction as follows: 1) building the industrial eco-system, 2) managing both advance and applicability enhancement, 3) Establishing from a long-term point of view.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.363-374
• /
• 2021

The purpose of this study is to analyze how much the mining industry contributes to the Mongolian national economy using the 2019 input-output table released by Asian development bank/ERCD in 2021 to understand the characteristics of the Mongolian economy and to use it as a reference. For this study, the Mongolian economy was classified into 35 industries and the contribution of the national economy was analyzed. As a result of the analysis, the total production inducement amount of the Mongolian mining industry was $38,418 million, the total production inducement coefficient was 1.473, the index of sensitivity of dispersion was 1.696, the value added inducement coefficient was 0.707, and the production inducement coefficient was 1.473. It can be seen that the Mongolian mining industry has a higher production inducement effect than other industries, and has great potential for development as a strategic industry leading other industries.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.424-431
• /
• 1999

The reproducibility of successive growth of $Bi_{12}TiO_{20}$ (BTO) single crystlas using a top-seeded solution growth (TSSG) pulling method was evalutated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established expermentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasized that a starting solution, with a 10.0~10.1 mol% $TiO_{2}$ concentration, results in large single crystals with a highly homogeneous lattice constant of within ${\pm}1{\times}10^{-4}\AA$, when the solidified fraction of the grown crystal is less than about 45 %. A wavelength dispersion of refractive index was measrued for the first time, and it was verified that the refractive index of BTO is larger than that of BSO($Bi_{12}TiO_{20}$), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.