• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.70-77
• /
• 1999

A new method for fabricating long fiber Bragg gratings(FBGs) using uniform phase mask is proposed. The proposed method is characterized by forming a number of subgratings sequentially in series and varying linearly the effective refractive index of each subgrating. The reflectivity of a 200mm long uniform FBG developed fabricated by the method is about 95%. Also, the bandwidth and dispersion slope of a 250mm long linear-chirped FBG developed here are ∼0.5nm and ∼4.965ps/nm respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1782-1792
• /
• 1994

Ti : $LiNbO_3$ traveling-wave phase optical modulators at wavelength 1.3㎛ have been designed and fabricated, focusing on the optical waveguide and asymmetric coplanar electrode structure. To improve the phase-mismatch of traveling-wave ACPS electrode, the characteristic impedance, effective microwave index, and electrode loss have been presented as a function of geometric parameters including electrode and buffer layer thickness. Low-loss channel optical waveguides on $LiNbO_3$ were fabricated by the Ti diffusion method with $O_2$ water-vapor environment. $2.5{\mu}m$ thick electrode was successfully fabricated by double-spin image reversal process. Modulation bandwidth was limited by a resonance at 2.9 GHz and modulation bandwidth up to 2.5GHz was approxirnately measured.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.70-75
• /
• 1998

The ZnS-SiO$_2$ composite films were fabricated by codeposition from two independent sources. The optical properties and microstructures of these composite films were investigated. The refractive indices of the composite films were compared those by Drude's fomula and showed a good agreement. it showed that microstructures of composite films are an armorphous. But microstructures of composite films with ion assisted deposition are changed from an armorphous to crystalline with increasing Zn mole fractions. We designed and fabricated a single layer antireflection coating on the crystalline silicon substrate using the refractive index of the composite films.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.320-326
• /
• 2001

In this paper, we have fabricated asymmetric Y-branch optical power splitters with various optical power splitting ratios by changing the width of one of the output waveguides using $Ag^+-Na^+$ ion change method in BK7 glass. The transmission characteristics of asymmetric Y-branch optical power splitters with different output waveguide width have been investigated using the finitedifference beam propagation method (FD-BPM). We have found the index of the channel waveguide formed by Ag+-Na+ ion change method in BK7 glass and have fabricated channel waveguides to examine the transmission characteristics of channel waveguide. And we have fabricated asymmetric Y-branch optical power splitters with output waveguide width from TEX>$4{\mu}m$ to $6{\mu}m$. /TEX>.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.129-132
• /
• 2009

Monodisperse ZnS colloidal particles with precisely specified diameters over a broad size range were synthesized by controlled aggregation. Sub-10nm ZnS seed crystals were first nucleated at ambient temperature and then grown at an elevated temperature, which produced large polydisperse colloidal particles. Subsequent rapid thermal quenching and heating processes induced a number of secondary nucleations in addition to growing the large polydisperse microparticles which were finally removed by centrifugation and discarded at the completion of the reaction. The secondary nuclei were then aggregated further at elevated temperatures, resulting in colloidal particles which exhibited a nearly monodisperse size distribution. Particle diameters were controlled over a wide size range from 50 nm to 1 μm. Mie simulations of the experiment extinction spectra determined that the volume fraction of the ZnS is 0.66 in an aggregated colloidal particle and the colloidal particle effective refractive index is approximately 2.0 at 590 nm in water. The surface of the colloidal particles was subsequently coated with silica to produce ZnS@silica core-shell particles.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2083-2088
• /
• 2007

Biosensor based on rugate PSi interferometer for the detection of avidin has been described. Rugate PSi fabricated by applying a computer-generated pseudo-sinusoidal current waveform has been prepared for the application as a label-free biosensor based on porous silicon interferometer. The fabrication, optical characterization, and surface derivatization of a rugate PSi has been described. The method to fabricate biotinderivatized rugate PSi has been investigated. The surface and cross sectional morphology of rugate PSi are obtained with SEM. FT-IR spectroscopy is used to characterize the oxidation and functionalization reaction of rugate PSi sample. Binding of the avidin into the biotin-derivatized rugate PSi induces a change in refractive index. A red-shift of reflectivity by 18 nm in the reflectivity spectrum is observed, when the biotin-modified rugate PSi was exposed to a flow of avidin.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.169-174
• /
• 2003

We report theoretical and experimental investigation of a polarizer made of single mode side-polished fiber covered with a metal film. The influence of the metal film thickness and the refractive index of overlay on the device performance has been analyzed in terms of the normal mode theory. Based on the theoretical prediction, a polarizer with 40 ㏈ of polarization extinction ratio and 0.5 ㏈ insertion loss at optical communication wavelength has been realized.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.245-249
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum coupling is designed and demonstrated. Its branch waveguide is fabricated by reactive ion etching. Then, the modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides, and it is implemented by photobleaching after the device fabrication. The structure of the modified coupling region and its refractive index profiles are designed to optimize and mode coupling in the Y-branch waveguide. Therefore, the switching performance of the device was shown to be enhanced with a fixed device length. The measured drive voltage is reduced by more than 30 percents, and the crosstalk is also improved by about 4~6 dB.

• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.256-261
• /
• 2011

In this paper, a variable optical signal delay line based on coupled ring resonators is designed and fabricated in high-index contrast polymer material. The free spectral ranges (FSR) of the rings are designed to be 100 GHz, and 8 coupled rings are used. When two rings near a bus waveguide are in resonance, the optical delay is measured to be about 100 ps. When four rings are in resonance, the measured delay is about 180 ps. Both are close to the theoretical calculations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.29-32
• /
• 1999

$GaF_3$ films were directly grown on p' and p-type GaAs(100) substrates using a $SF_6$ plasma discharge system. GaAs MIS(Meta1-Insulator-Semiconductor) capacitor was successfully fabricated for about 1 hour at temperature $290^{\circ}C$ using the as-grown $GaF_3$ films. The as-grown films on p'-GaAs exhibited a current density of less than 6.68 $\times$ $1O^{-9}$ A/$cm^2$ at a breakdown field of 500kV/cm and a refractive index of 2.0 ~ 2.3 at a wavelength of 632.8 nm. The dielectric constant was about 5 derived from 1 MHz capacitance-voltage (C-V) measurements. Dielectric dispersion of the fluoridated films on p'-GaAs measured ranged from 100 Hz to 10 MHz was not observed.