• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.26-41
• /
• 2016

Catchment Hydrologic Cycle Assess Tool (CAT) is a model for hydrologic cycle assessment based on physical parameters. In this study, CAT was applied for short-term runoff simulation and connected with model-independent parameter estimation (PEST) for auto-calibrating parameters. The model performance was compared with HEC-HMS, which is widely used for short-term runoff simulation. The study area is the Pangyo Watershed ($22.9km^2$), which includes the Unjung-Cheon and Geumto-Cheon tributaries of the Tan-Cheon stream. Simulation periods were selected from six rainfall events of a two-year period (2006-2007). For the runoff simulation, CAT was applied using three types of infiltration methods (excess rainfall, Green and Ampt and Horton). Sensitivity analysis was carried out to select the parameters and then CAT was optimized using PEST. The model performance of HEC-HMS and CAT-PEST for the rainfall events were within an acceptable limit with Nash Sutcliffe efficiencies (NSE) of 0.63-0.91 and 0.42-0.93, respectively. The simulation results of HEC-HMS have high accuracy in the case of rainfall events that have a sensitive relationship between initial soil moisture conditions and runoff characteristics. The results of CAT-PEST indicated the possibility of reflecting a real runoff system using various physical parameters.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.359-371
• /
• 2017

This study generated flood time series of ungauged catchments in the Andongdam catchment using a distributed rainfall-runoff model and data generation method, and extracted the peak flows of 50 catchments to investigate the effect of rainfall spatial variability on peak flow simulation. The model performance statistics for three gauged catchments were reasonable for all events. The flood time series of the 50 catchments were generated using distributed and mean rainfall time series as input. The distribution of the peak flow using the mean rainfall was similar or slightly different to that using the distributed rainfall when the distribution of the distributed rainfall was nearly uniform. However, the distribution of the peak flow using the mean rainfall was reduced significantly compared to that using the distributed rainfall when actual storms moved to the top or bottom of the study catchment, or the rainfall was randomly distributed. These cases were 35% of total number events. Therefore, the spatial variability of rainfall should be considered for flood simulation. In addition, the power law relationship estimated using the peak flow of gauged catchments cannot be used for estimating the peak flow of ungauged independent catchments due to latter's significant variation of the peak flow magnitude.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2011

In this study, annual maximum storm events are proposed to determined by the return periods considering total rainfall and rainfall intensity together. The rainfall series at Seoul since 1961 are examined and the results are as follows. First, the bivariate exponential distribution is used to determine annual maximum storm events. The parameter estimated annually provides more suitable results than the parameter estimated by whole periods. The chosen annual maximum storm events show these properties. The events with the biggest total rainfall tend to be selected in the wet years and the events with the biggest rainfall intensity in the wet years. These results satisfy the concept of critical storm events which produces the most severe runoff according to soil wetness. The average characteristics of the annual maximum storm events said average rainfall intensity 32.7 mm/hr in 1 hr storm duration(total rainfall 32.7 mm), average rainfall intensity 9.7 mm/hr in 24 hr storm duration(total rainfall 231.6 mm) and average rainfall intensity 7.4 mm/hr in 48 hr storm duration(total rainfall 355.0 mm).

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.907-915
• /
• 2010

Agriculture nonpoint pollution source is a significant contributor to water quality degradation. To establish effective water quality control policy, environpolitics establishment person must be able to estimate nonpoint source loads to lakes and streams. To meet this need for orchard area, we investigated a real rainfall runoff phenomena about it. We developed nonpoint source runoff estimation models for vineyard area that has lots of fertilizer, compost specially between agricultural areas. Data used in nonpoint source estimation model gained from real measuring runoff loads and it surveyed for two years(2008-2009 year) about vineyard. Nonpoint source runoff loads estimation models were composed of using independent variables(rainfall, storm duration time(SDT), antecedent dry weather period(ADWP), total runoff depth(TRD), average storm intensity(ASI), average runoff intensity(ARI)). Rainfall, total runoff depth and average runoff intensity among six independent variables were specially high related to nonpoint source runoff loads such as BOD, COD, TN, TP, TOC and SS. The best regression model to predict nonpoint source runoff load was Model 6 and regression factor of all water quality items except for was $R^2=0.85$.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.351-356
• /
• 2009

This study purposed to judge potential possibility of building highly precise empirical model using environmental variables. Environmental variables such as altitude, mean annual rainfall, mean annual temperature and organic matter ratio of soil were added to height and diameter model for Chamaecyparis obtusa, and examined accuracy and residuals of prediction model. Improvement in precision was found for the Gompertz polymorphic height model by including mean temperature and altitude as independent variables, while the Gompertz diameter model with annual rainfall and altitude was showed improvement of precision and accuracy. Comparing the improvement of precision between the model before adding environmental variables and the model after adding them, an improvement or some ratio was obtained though it is not obvious. Therefore, there is enough proof that adding environmental variables, which can be easily acquired relatively when considering the difficulties of measurement and budget, into the model as independent variables would improve the accuracy and precision of growth models.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.119-127
• /
• 2006

The purpose of this study is to present quantitatively the influence of variables that had the largest effect on the changes in suspended solids(SS), which would cause turbid water phenomenon, among water quality factors of the non-point pollution source, and then to develop a multiple regression equation of SS and predict the water quality of ungaged watersheds so as to provide basic data to establish efficient management plans for SS which flow in rivers and lakes. To identify the correlation of SS with the amount of rainfall and the state of land use, a simple correlation analysis and a simple regression analysis were conducted respectively. Finally, a multiple regression analysis was conducted to provide that SS were set as dependent variables while the amount of rainfall, paddy fields and dry fields were set as independent variables. As a result, the amount of rainfall had the most significant influence on changes in SS, followed by dry fields and paddy fields. In addition, the multiple regression equation was developed to predict SS in unmeasurable watersheds.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.543-550
• /
• 2007

In this study, combined sewer overflows (CSOs) from five independent rainfall events in rural city area were collected and investigated. First flush effect in sewage pumping station located near the WWTP was retarded 30 to 60 minutes from booster pumping station. The ratios between SS, COD and TP concentrations prior to rainfall and peak concentrations during the period of rainfall were highly increased but nitrogen was relatively constant, which indicates that it is not associated with particles washed off from the surface of watershed. Mass balance results show that 30% of CSO was generated from booster pump station and 66.5% of CSO was from the whole runoff area. In the area of newly constructed sewer system, CSO problem was related with pump and sewer capacities, but in other old sewer system equipped area, it was due to the collection efficiency. Finally, Log-Log pollutant rating equations were suggested.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.311-323
• /
• 2019

The number of newly constructed traditional Korean houses, i.e., Hanoks, and light-frame buildings is increasing. However, related research is limited owing to the lack of awareness regarding safety evaluations. Therefore, this study conducted an outdoor exposure test to accurately evaluate wooden constructions. Spruce, pine, and fir (SPF) material was monitored for a year, wherein the SPF material was artificially dried under 18% moisture content, and its physical properties and color differences were measured once a month. Large differences were observed in the material's weight and moisture content, which are indexes sensitive to daily range and rainfall; however, no significant difference was found for other basic properties in the pre and post test results. Herein, $L^*$, $a^*$, and $b^*$ values represent color differences; these values exhibited a general decrease after the test. Such differences were attributed to the loss of lignin in the wood. The color difference value was high between the months of May and July, when the daily range and rainfall significantly fluctuated. Multiple regression analysis was performed on the $a^*$ value (redness indicator), daily range, rainfall, and ultraviolet index. The results indicated that the daily range influenced redness the most. According to the estimated regression equation, the daily range and redness are positively correlated. Based on the results, the types and influence of independent variables on color difference are expected to change as the wood's duration of outdoor exposure and the amount of data obtained both increase.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.167-178
• /
• 2021

Spatial variability is an inherent uncertainty of soil properties. Current reliability analyses generally incorporate random field theory and Monte Carlo simulation (MCS) when dealing with spatial variability, in which the computational efficiency is a significant challenge. This paper proposes a KL-FORM algorithm to improve the computational efficiency. In the proposed KL-FORM, Karhunen-Loeve (KL) expansion is used for discretizing random fields, and first-order reliability method (FORM) is employed for reliability analysis. The KL expansion and FORM can be used in conjunction, through adopting independent standard normal variables in the discretization of KL expansion as the basic variables in the FORM. To illustrate the effectiveness of this KL-FORM, it is applied to a case study of a strip footing in spatially variable unsaturated soil under rainfall, in which the bearing capacity of the footing is computed by numerical simulation. This case study shows that the KL-FORM is accurate and efficient. The parametric analyses suggest that ignoring the spatial variability of the soil may lead to an underestimation of the reliability index of the footing.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.211-217
• /
• 2004

The instrument used in this study consists of a lkg capacity loadcell and a Imm tipping bucket rain gauge. There are two signals: one is the weight of the water in the tipping bucket and the other is the pulse from the reversing mechanism of the tipping bucket. The loadcell measures the weight of water with a 0.0lmm resolution up to 1mm rainfall and the bucket reverses beyond 1mm. From this point, a pulse signal generates and the loadcell starts measuring the weight again. A field test was carried out with the range of rainfall intensity from 42mm/h to 250mm/h. The result shows an error range from -2.2% to + 2.6% in 12 measurement cases with a rainfall of l00mm or more. This result satisfies the WMO recommendation for rainfall intensity instrumentation which allows a 5% range. In a field experiment during 17 to 19 August, 2004, more than 100mm/h rainfall intensity was observed by this instrument, confirming that our instrument has a sufficient capacity of rainfall intensity measurement under extreme conditions like Jangma (Bai-u season). Compared with existing commercial models which employ a water drop measurement method, our method can give a practical solution for diagnostic check of remote rain gauges using two independent signals.