• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.469-477
• /
• 1993

Residual stresses is one of the major factors to degrade the magnetic properties of VCR magnetic heads. Vicker's indentation technique was adapted to estimate the residual stresses Residual stresses and distribution in the glass and ferrite were obtained after bonding ferrite with glass, varing the cooling rate. The compressive and tensile stresses were developed in the interface and gradually decreased with increasing distance from the interface. The stresses were decreased with a cooling rate. The mean values of residual stress in ferrite were 10MN/㎡, 8MN/㎡, 5MN/㎡ with cooling rate 10℃/min, 5℃/min, 1℃/min respectively. When the bonded sample was annealed above the glass transition temperature followed by cooling at 5℃/min cooling rate, the residual stress was reduced to 6MN/㎡.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.225-228
• /
• 2005

The purpose of this study is to investigate effects of the plastic/elastic deformation energy on wet etching characterization on the surface of material by using the nanoindentation and HF wet etching technique. Indents were made on the surface of Pyrex 7740 glass by the hyperfine indentation process with a Berkovich diamond indenter, and they were etched in $50\;wt\%$ HF solution. After etching process, convex structure was obtained due to the deformation-induced hillock phenomena. In this study, effects of indentation process parameters (normal load, loading rate) on the morphologies of the indented surfaces after isotopic etching were investigated from an angle of deformation energies.

• International Journal of Aerospace System Engineering
• /
• 제7권2호
• /
• pp.1-5
• /
• 2020

When a rigid wedge is indented in to a semi-infinite block, the material is bulged up around the wedge that is generally called lip. The previous works in this filed considered the outer profile of the lip to be linear. But, present authors observed both experimentally and with the aid of finite element analysis that the profile of the lip is not always linear, and it depends on the angle of the wedge and friction parameters. So, in this work, attempts have been made to calculate hardness of indentation for different wedge angles and friction parameters. As hardness is intrinsic property of material, consideration of either linear or parabolic lip will not be affected much. A comparative study of hardness for linear and parabolic free surface profiles of the piled up material around the cone is analyzed in this work.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.330-336
• /
• 2000

치아 대체용 재료로서 응용되고있는 유리침윤 알루미나 복합체에서 미세구조 및 압입응력이 파괴거동에 미치는 영향을 헤르찌안 및 비커스 압입시험을 사용하여 조사하였다. 유리침윤 알루미나의 압입 응력벽형 거동은 높은 하중에서 약간의 비선형성을 보이는 준소성과 전형적인 헤르찌안 콘 균열을 동시에 나타내고 있으며, 계면 접합 시험편을 이용한 표면아래의 손상에서도 이를 확인할 수 있었다. 일차 성형체의 압입 응력-변형 곡선은 기공형태 및 입자크기에 크게 의존하고있지만, 유리침윤 공정이후 제조된 복합체에서는 큰 차이를 보이지 않았다. 복합체의 파괴는 준소성 변형 영역에서 일어나고 있으며, 헤르찌안 압입응력장이 재료손상 및 파괴거동에 미치는 영향을 이론적으로 조사하여 압입응력이 재료의 손상에 미치는 영향이 매우 크다는 것을 알았다. 그러나 압입시험후 행해진 어닐링 공정은 알루미나의 파괴거동에 변화를 가져왔으며, 이는 어닐링 공정을 통해 재료가 받은 응력장이 치료되었음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.407-412
• /
• 2001

In this research, damage behavior of singly oriented ply (SOP) fiber metal laminate (FML) subject to concentrated load was studied. The static indentation tests were conducted to study fiber orientation effect on damage behavior of FML. During the static indentation tests, Acoustic Emission technique (AE) was adopted to study damage characteristics of FML. AE signals were obtained by using AE sensor with 150kHz resonance frequency and the signals were compared with indentation curves of FML. As fiber orientation angle increases, the crack initiation load of SOP FML increases because the stiffness induced by fiber orientation is increased. The penetration load of SOP FML is influenced by the deformation tendency and boundary conditions. Cumulative AE counts were well predicted crack initiation and crack propagation and AE amplitude were useful for prediction of damage failure mode. During the matrix cracking, fiber debonding and fiber breakage, AE amplitude has $45{\sim}60dB,\;60{\sim}80dB\;and\;90{\sim}100dB$, respectively.

• 한국세라믹학회지
• /
• 제41권7호
• /
• pp.503-507
• /
• 2004

The importance of porous ceramics has been increasingly recognized and adequate strength of porous ceramics is now required for structural applications. Porosities of porous ceramics act as flaws in inner volume and outer surface which result in severe strength degradation. The effect of pore structure, however, on strength and reliability of porous ceramics has not been clearly understood. We investigate the relationship between pore structure and mechanical properties using a sphere indentation on bilayer structure, porous ceramic top layer with soft polymer substrate. Porous alumina and silica were prepared to characterize the isolated pore structure and interconnected pore structure, respectively. The porous ceramic with 1mm thickness were bonded to soft polycarbonate substrate and then fracture strengths were estimated from critical loads for radial cracking of porous ceramics during sphere indentation from top surface. This simple and reproducible technique provides Weibull modulus of strength of porous ceramics with different pore structure. It shows that the porous ceramics with isolated pore structure have higher strength and higher Weibull modulus as well, than those with interconnected pore structure even with the same porosity.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.529-535
• /
• 2012

본 논문의 목적은 계장화 압입시험과 유한요소해석을 이용하여 아연도금강판의 기계적 물성을 추정하는 것이다. 먼저 인장시험을 통하여 유한요소해석에 요구되는 두께에 따른 아연도금강판의 기계적 물성을 획득하였으며, 이를 이용하여 유한요소해석을 수행하여 특정지점에서의 소성 응력 및 변형률을 획득하였다. 이러한 유한요소해석의 유효성은 계장화 압입시험의 하중-변위선도와 비교를 통하여 검토하였다. 유한요소해석을 통하여 구한 진응력-진변형률 곡선을 인장시험 결과와 비교하여 이의 정확성을 검증하였으며 또한 이를 바탕으로 대표 응력 및 변형률 산출지점을 재평가하였다.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.667-671
• /
• 2003

테이프 캐스팅법을 이용하여 알루미나/지르콘(반응결합 뮬라이트/지르코니아 유도)을 내부층으로 하고 알루미나/지르코니아 혹은 뮬라이트/지르코니아를 외부층으로 하는 산화물 층상 복합체를 고온가압소결법으로 제조하였다. 나노압입시험법을 이용하여 층상 산화물 복합체의 기계적 성질(경도 및 탄성계수)을 측정하고, SEM을 통하여 복합체의 미세구조를 관찰하였다. 산화물 층상 복합체의 제조를 위한 가열·냉각시 유도된 구성 산화물간의 열팽창 계수의 차이로 인하여 생성된 잔류응력을 하중-변위곡선을 이용하여 확인할 수 있었다.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.27-33
• /
• 2011

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate explosion accident of the centrifugal casting machine in terms of the forensic engineering, in this paper, the computing simulation using ADINA FSI has performed to investigate that the effect of the Check-Pin fracture by the flow phenomena and molten metal weight and the mechanical properties test of the accident Check-Pin has performed using the instrumented indentation technique. Through these studies, the safety accident that may occur in centrifugal casting machine can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

• 열처리공학회지
• /
• 제32권3호
• /
• pp.113-117
• /
• 2019

The effects of severe plastic deformation and heat treatment on the mechanical properties of Al 5052 and 6005 alloys were investigated using the metallurgical technique and nano-indentation technique in nano-surface region. Equal channel angular pressing (ECAP) was used to apply severe plastic deformation to the aluminum alloys in order to obtain fine grain sized materials. The elastic modulus was measured and interpreted in relation to the metallurgical observation. The elastic modulus increased after ECAP process due to evolution of the fine grains. However, the elastic modulus decreased after heat treatment due to generation of coarsened precipitates on the grain boundaries.