• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.503-512
• /
• 1990

In this study, a penalty method effective for the case that has no snap-back phenomenon, is proposed and an adaptive method which choose the penalty method or Riks' type method, is suggested for the case of snap-back problem. And for the case that loads are applied to one or more points of a structure, the Riks' method is applied in general, but under certain condition choice of new incremental load parameter is suggested to accelerate the convergence rate. Finally, for the case that displacements of a structure are controlled at one or more points Riks' type method is proposed. In this case, the proposed method is applied in general but under certain condition it is recommended to choose other incremental displacement parameter to eliminate probable divergence. Five examples are analysed and compared with the result of published literature.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.5
• /
• pp.33-39
• /
• 2010

This study develops an approximate procedure for incremental dynamic analysis (IDA) using modal pushover analysis (MPA) with empirical equations of the inelastic displacement ratio ($C_R$) and the collapse strength ratio ($R_C$). By using this procedure, it is not required to conduct linear or nonlinear response history analyses of multi- or single- degree of freedom (MDF) systems. Thus, IDA curves can be effortlessly obtained. For verification of the proposed procedure, the 6-, 9- and 20-story steel moment frames are tested under an ensemble of 44 ground motions. The results show that the MPA-based IDA with empirical equations of $C_R$ and $R_C$ produced accurate IDA curves of the MDF systems. The computing time is almost negligible compared to the exact IDA using repeated nonlinear response history analysis (RHA) of a structure and the original MPA-based IDA using repeated nonlinear RHA of modal SDF systems.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.115-124
• /
• 2000

This study is a suggest a measurement method of lateral displacement, which can be used to judge the stability of bridge abutment on soil undergoing lateral movement. The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the inclinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.17-27
• /
• 1995

For the post-buckling and elasto-plastic analysis of shell structures, the total Lagrangian formulation is presented based upon the degenerated shell element. Geometrically correct formulation is developed by updating the direction of normal vectors in the iteration process and evaluating the total Green-Lagrange stain corresponding U total displacements. In the calculation of the stiffness matrix, the element formulation takes into account the effect of finite rotation increments by retaining second order rotation terms in the incremental displacement field. The selective or reduced integration scheme using the heterosis element is applied in order to overcome both shear locking phenomena and the zero energy mode. The load/displacement incremental scheme is adopted for geometric non-linear F .E. analysis. Based on such methodology, the computer program is developed and numerical examples to demonstrate the accuracy and the effectiveness of the proposed shell element are presented and compared with references's results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1638-1642
• /
• 2003

Piezoactuator using a flexure hinge mechanism is often used in the precision stages. When the total size of the hinge mechanism become small compared with the deformation of the hinge mechanism, the geometrical nonlinearity makes a considerable error in the output displacement. In this research, the incremental method based on the matrix method is developed to model the effect of the geometrical nonlinearity. Developed modeling method is applied to derive the error of output displacement of the bridge-type hinge mechanism and its results are derived with respect to the design parameters. This method can be easily used to the design optimization of the hinge mechanism and analysis results show that the geometrical nonlinearity error should be considered to achieve a high accuracy to the piezoactuators.

• Structural Engineering and Mechanics
• /
• v.4 no.1
• /
• pp.91-107
• /
• 1996

In Lagrangian mechanics, attention is directed at the body as it moves through space. Each body point is identified by the position it would have if the body were to occupy an arbitrary reference configuration. A result of this approach is that the analyst often describes the body by using quantities that may involve more than one configuration. This is particularly common in incremental calculations and in changes of the choice of reference configuration. With the rise of very powerful computing machinery, the popularity of numerical calculation has become great. Unfortunately, the mechanical theory has been evolved in a piecemeal fashion so that it has become a conglomeration of differently developed patches. The current work presents a unified development of the equilibrium principle. The starting point is the conservation of momentum. All details of configuration are shown. Finally, full dynamic and static forms are presented for total and incremental work.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.261-266
• /
• 1998

In this study, crush characteristics of thin-walled rectangular tube is investigated. The stiffness of the element is obtained from analytical moment-rotation relationship and approximated load-deflection relationship of thin-walled rectangular tube. A computer program is developed for the large deformation analysis of frame. An incremental displacement method is used in the program and at each incremental stage, the stiffness matrix of the total structure is checked with the state each element for bending and compression.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.207-212
• /
• 1993

In the construction of underground structures, it is critical to accurately predict the ground deformations during excavation. In this paper, a finite element procedure for the computation of solid displacement and fluid pore pressure during incremental excavation is presented based on Biot's theory. The numerical formulation is done using the virtual work principle. The proposed procedure is applied to some example problems with different excavation rates and permeabilities.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.59-69
• /
• 2018

This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.87-94
• /
• 2003

A geometric non-linear finite element formulation of CRTS reflector subjected to displacement loads, corresponding to the successional assembly steps of the reflector, is presented in order to determine the initial static equilibrium state based on the displacement incremental method. Parametric analyses of the influence of cables and mechanical properties of the reflector on the shape error between reference and equilibrium surfaces have been studied. These results of the present study are compared with the others using Galerkin mothod and NASS 98 program to demonstrate the feasibility.