• 설비공학논문집
• /
• 제13권3호
• /
• pp.153-159
• /
• 2001

A system simulation program was developed for a multi-type inverter heat pump. Electronic expansion valve(EEV) was used to extend the capacity modulating range of the heat pump as expansion device. The program was also developed to calculate actual system performance with the building load variation with climate during a year. The performance variation of a multi-type hat pump with two EEV and an inverter compressor was simulated with compressor speed, capacity, and flow area of the EEV. As a result, the optimum operating frequency of the compressor and openings of the expansion device were decided at a given load. As compressor speed increased, he capacity of heat pump increased, the capacity of heat pump increased. Therefore flow area of EEV should be adjusted to have wide openness. Thus the coefficient of performance(COP) of the heat pump decreased due to increasement of compressor power input. The maximum COP point at a given load was decided according to the compressor speed. And under the given specific compressor speed and the load, the optimum openings point of EEV was also decided. Although the total load of indoor units was constant, the operating frequency increased as the fraction of load in a room increased. Finally ad the compressor power input increased, the coefficient of performance decreased.

• 대한건축학회논문집:계획계
• /
• 제36권1호
• /
• pp.125-136
• /
• 2020

This study aims to seek a proper policy direction in response to the demand for apartment remodeling. As the research methods, we diagnosed the current status of the remodeling policy and analyzed the demand for apartment remodeling nationwide. According to the result of analysis, we suggested the fundamental direction and tasks for remodeling policies to be pursued at the government level. The results of the study are summarized as follows. First, the result of analysis showed that the demand for environmental improvement(performance improvement) remodeling project was much higher than other types of remodeling projects. The percentage of unit increased-type remodeling that can secure business feasibility is about 10% and only 30% when it comes to reducing project costs. The remaining 70-90% need to be promoted in environmental improvement remodeling projects which dependent on the residents' payment. Second, in order to prepare a policy action plan in response to the demand for apartment remodeling, it is necessary to set up clear policy goals and strategies for apartment remodeling in advance at the national level. Along with proactive goals and strategies, graded policy support should be accompanied per type of remodeling and business demand. We also suggest to simplify administrative procedures and support the R&D research to develop technologies. It would help to utilize the unit increased-type remodeling. On the other hand, for utilizing the environmental improvement remodeling which takes up a relatively high proportion, the policy should take care of as follows: offering housing performance information, rationalizing long term repair reserve, fostering small companies and experts. Finally, apartment management system should be advanced from the perspectives of managing old apartments and institutional foundations such as new construction and customized regulations for differentiated remodeling should be accompanied.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.178-183
• /
• 2003

50Li$_2$O-xTiO$_2$-(50-x)P$_2$O$_{5}$의 조성을 가진 유리에서 중간산화물인 TiO$_2$의 치환량을 증가시키면서 유리를 제조하여 전기 전도도의 변화를 고찰하였다 TG-DTA를 이용하여 열적 특성을 관찰하였으며, FT-IR을 이용하여 유리의 구조변화를 관찰하였다. TiO$_2$의 양이 증가함에 따라 밀도와 유리 전이온도는 증가하였다. 이는 유리 내에서 P-O-Ti 교차결합이 형성되면서 결합 강화가 발생하기 때문이다. 전기 전도도는 TiO$_2$치환량과 함께 증가하여 x=20에서 1.27$\times$$10^{-6}$ S/cm(상온)의 최대값을 나타내었다. 전기 전도도는 유리의 지배적 구조가 pyrophosphate unit으로 변화하면서 크게 증가하는 것을 관찰할 수 있었으며, 이는 비가교 산소의 증가로 인한 Li+ 이동도의 증가 때문이다.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.96-107
• /
• 2015

네트워크(Vehicular Ad-hoc Networks; VANET) 기술은 텔레매틱스/지능형 교통시스템을 구축하여 실시간 정보를 수집 및 공유하여 교통 체증 완화, 교통사고 예방뿐만 아니라, 차량 안에서 인포테인먼트(Infotainment) 서비스를 제공한다. 요구하는 서비스 증가로, 고정된 프레임 안에서 한정된 자원을 사용하는 기존의 기술은 효율적인 차량통신 서비스에 한계가 있다. 따라서 주변 상황에 따라 유연한 동작의 프로토콜 설계와 정보를 효율적으로 인식, 예측, 분배, 공유를 할 수 있도록 적응적인 설계가 필요하다. 본 논문에서는 차량과 RSU(Road Side Units) 기반의 V2I(Vehicle to Infrastructure) 구조와 차량간 통신 V2V(Vehicle to Vehicle) 구조를 상호 결합하여 차량 통신에 할당된 자원을 보다 효율적으로 관리, 사용하기 위한 새로운 방법을 제안한다. 성능 평가를 통해 제안된 V2I/V2V 협력 스케줄 메시지 전송을 통해 높은 자원 이용률을 달성할 수 있음을 보였고, 제어정보를 넓은 범위로의 신속한 전송을 위한 최적 전송 기회 시간과 2차 릴레이 차량 전송 확률 값을 도출하였다.