• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.145-150
• /
• 2021

최근 드론에 대한 관심이 많아지고 드론의 이용이 급증하면서 드론을 배우려는 사람들이 증가하고 있다. 하지만 드론은 조작이 어려우며 재대로 배우지 않는다면 사고가 발생하기 쉽고 드론이 파손되는 경우도 빈번하게 일어나고 있다. 본 연구에서는 드론을 안전바에 결속하여 안전사고와 드론의 파손을 방지하고 블록을 통해 센서 및 제어기기를 확장할 수 있는 다목적 드론을 구현하였다.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.93-102
• /
• 2020

In this study, we examined the relationship among the rheological properties, workability, and extrudability in the construction of concrete structures using additive manufacturing. We altered the component materials (binder type, water-binder (W/B) ratio, sand ratio) to assess their effect on the rheological properties experimentally. The results indicated that the W/B and sand ratios had the largest effect on the rheological properties. In particular, when the sand ratio increased, it indicated that adjusting the sand ratio would facilitate control over the rheological properties. Additionally, we compared the rheological properties with the results of a traditional workability evaluation, namely the table flow test. This indicated the possibility of inferring the rheological properties by using traditional methods. Finally, we evaluated extrusion quantity according to table flow. The extrusion rate was 350 g/s for a flow of 210 mm and 170 g/s for a flow of 130 mm, indicating that extrusion rate increased as flow increased; however, we concluded that a flow standard of approximately 140-160 mm is suitable for controlling the actual extrusion quantity and rate.

• Toxicological Research
• /
• 제17권1호
• /
• pp.7-9
• /
• 2001

The quantitative assessment of the penetration of organic solvents through skin is necessary for the evaluation of health hazards in occupational environments. We investigated the rate of dermal penetration when mixed or single forms of organic solvents were placed into a diffusion cell in vitro or into an experimental animal in vivo. The diffusion rates of methanol. toluene, and styrene were 6.07, 0.129, and 0.046 mg/$cm^2$/h, respectively. When skin was exposed to the mixed solvent of methanol and toluene, the penetration rate of toluene did not change significantly (0.110 mg/$cm^2$/h). However, the rate of methanol penetration increased to 43.90 mg/$\textrm{cm}^2$/h. The penetration rate of methanol also increased significantly to 54.69 mg/$cm^2$/h by mixing it with styrene. The concentration of methanol in the blood was monitored during the epicutaneous exposure in rats. The blood concentration of methanol was increased by mixing methanol with toluene as seen in the in vitro experiments. These results showed that the penetration rate of organic solvents would be enhanced by mixing them with other solvents.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.1-13
• /
• 2003

Domestic industry calamity rate did decrease in large numbers by many efforts of the safety and the health organizations. Nevertheless domestic industrial accident level is low yet among the OECD countries. Domestic small and medium enterprises is in trend that industrial accident is increased by deterioration of hardware, unpreparedness of safety equipments. But, Domestic small and medium enterprises' safety and health education had not been utilized so far effectively. This research groped efficient operation model of the safety and the health education through the survey about a solution for problems of education that is enforced in small and medium enterprises to three groups of workers and safety and health administrators and managers. Compared domestic safety and health educational system and advanced foreign educational system. And, analyze problems about domestic small and medium enterprise's safety and health education and presented a solution. Finally, presented efficient operation model of the safety and the health education suitable to domestic medium and small enterprises.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.619-637
• /
• 2011

The development of society and the desire for a happy life for the safety of the public's interest in higher things of the increased body, Bain safety awareness and safety of repeated disasters without action to prevent the spread will have no choice but to tough it will also harm. Safety education training from an early age desperately needed for safety's why. Elementary Middle High School students' characteristics and level of safety for your knowledge, skills, attitudes and habits in order to train to teach in any manner whatsoever any information about the study will assess the need.

• Safety and Health at Work
• /
• 제12권1호
• /
• pp.28-34
• /
• 2021

Background: Safety management is required to ensure health and safety of personnel in Norwegian fish farming. However, few studies have addressed the status and practical relevance of this risk-reducing measure. Methods: This article provides new knowledge through interviews with 35 employees at different company levels, addressing perceptions of various safety management activities according to managers and operational personnel. Results: The interviews show that managers and operational personnel at fish farms agree that the quantity of measures aimed to improve safety has increased in recent years. However, some activities are perceived to have higher practical relevance than others. In general, measures that fit well with the practical reality are well received by the employees at the fish farms. Conclusion: Suggested improvements include involving operational personnel in the design of procedures, considering all risk dimensions that may affect occupational health and safety, and challenging the value of specific safety activities based on a detailed knowledge of the distinctive characteristics of work practice in fish farming.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.54-64
• /
• 2024

This study investigated the impact of a safety coaching program on the safety behavior and safety climate among expressway safety patrols. Four to seven patrols from each of the three branches participated in this study. The safety coaching program was developed based on the GROW model, with main contents including recognizing individual differences, exploring safety values, communicating near-misses, providing effective and efficient feedback, employing non-violent communication, and fostering commitment toward safety behaviors. Additionally, each session included self-monitoring and peer review of each item based on a critical behavior checklist developed for this study, with challenging goals set based on the monitoring and review. The safety coaching program comprised six sessions in three branches, while three other branches were assigned as a control group. A non-equivalent control group experimental design was applied. Dependent variables included observed and perceived safety behavior, safety climate, psychological safety, and feedback. The results indicated that the safety coaching program effectively increased patrols' safety behavior and safety climate. Furthermore, psychological safety and feedback improved. These findings suggest that the developed safety coaching program could serve as an alternative method to enhance safety management for expressway safety patrols. Finally, the implications, limitations, and directions for future research are discussed.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.61-70
• /
• 2006

The likelihood of failure by the corrosion of high temperature $H_2S/H_2$, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and $H_2S$ concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of $H_2S$.

• 한국산업보건학회지
• /
• 제16권4호
• /
• pp.303-313
• /
• 2006

Two kinds of sepiolite (sepiolite 1, sepiolite 2), a $500^{\circ}C$ heat treated sepiolite (sepiolite 500), and a $700^{\circ}C$ heat treated sepiolite (sepiolite 700) were analyzed for their physicochemical properties. After these sepiolites were instilled into rat lungs, the effects of these substances on lung function and biochemical changes were evaluated. In addition, the fibers in the lungs were counted and characterized after the lungs were treated for electron microscopical analysis. The lungs instilled with sepiolites increased their weight and tidal volume statistically significantly compared with the unexposed control. The numbers of lymphocytes and polymorphonuclear cells (PMN) in the bronchoalveolar lavage (BAL) fluid also increased compared with the control, indicating the sepiolite induced inflammation. The heat treated sepiolites, however, did not show any toxicological differences from the untreated sepiolites. Although sepiolite showed less change in fiber atomic % compositions ( sepiolite 500, Si 0.9%, p <0.01 ; sepiolite 700, Si 3.7%, p<0.05) than chrysotile (Si 9.7%, p<0.01), the durability of the fibers in the lungs could not be determined in this subchronic experiment.