• 한국연소학회지
• /
• 제10권2호
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.134-134
• /
• 2019

Utilization of organic waste as a renewable energy source is promising for sustainability and mitigation of climate change. Pyrolysis converts organic waste to gas, oil, and biochar by incomplete biomass combustion. Biochar is widely used as a soil conditioner and adsorbent. Biochar adsorbs/desorbs metals and ions depending on the soil environment and condition to act as a nutrient buffer in soils. Biochar is also regarded as a carbon storage by fixation of organic carbon. Phosphorus (P) and nitrogen (N) are strictly controlled in many wastewater treatment plants because it causes eutrophication in water bodies. P and N is removed by biological and chemical methods in wastewater treatment plants and transferred to sludge for disposal. On the other hand, P is an irreplaceable essential element for all living organisms and its resource (phosphate rock) is estimated about 100 years of economical mining. Therefore, P and N recovery from waste and wastewater is a critical issue for sustainable human society. For the purpose, intensive researches have been carried out to remove and recover P and N from waste and wastewater. Previous studies have shown that biochars can adsorb and desorbed phosphates implying that biochars could be a complementary fertilizer. However, most of the conventional biochar have limited capacity to adsorb phosphates and nitrate. Recent studies have focused on biochar impregnated with metal salts to improve phosphates and nitrate adsorption by synthesizing biochars with novel structures and surface properties. Metal salts and metal oxides have been used for the surface modification of biochars. If P removal is the only concern, P adsorption kinetics and capacity are the only important factors. If both of P and N removal and the application of recovery are concerned, however, P and N desorption characteristics and bioavailability are also critical factors to be considered. Most of the researches on impregnated biochars have focused on P removal efficiency and kinetics. In this study, coffee waste is thermally treated to produce biochar and it was impregnated with Mg/Al to enhance phosphates and nitrate adsorption/desorption and P bioavailability to increase its value as a fertilizer. Kinetics of phosphates and nitrate adsorption/desorption and bioavailability analysis were carried out to estimate its potential as a P and N removal adsorbent in wasewater and a fertilizer in soil.

• Archives of Plastic Surgery
• /
• 제39권2호
• /
• pp.162-165
• /
• 2012

The synchondrosis between the sixth and seventh costal cartilage is usually used for the base frame in autogenous ear reconstruction. If the synchondrosis is loose, a variety of modifications can be devised. This report introduces new methods for these problems. In cases of incomplete synchondrosis, only the surface of the base block margin was smoothly tapered without carving for the removal of the conchal deepening. The secure fixation of the two segments (helix and antihelix) to the base block using fine wire sutures gave stability to the unstable basal frame. After confirming that all the segments were assembled in one stable piece, the remaining conchal deepening of the basal framework was removed, and the outer lower portion of the basal cartilage was trimmed along its whole length. A total of 10 consecutive patients with microtia, ranging from 8 to 13 years old, were treated from 2008 to 2009. The follow-up period was 6 months to 2 years. Despite incomplete synchondrosis, the stable frameworks were constructed using the authors' method and aesthetically acceptable results were achieved. The proposed method can provide an easy way to make a stable cartilage framework regardless of the variable conditions of synchondrosis.

• Journal of Korean Neurosurgical Society
• /
• 제58권3호
• /
• pp.248-253
• /
• 2015

Objective : The treatment of giant cell tumor (GCT) is mainly performed surgically. However, GCT in spine seems difficult to treat because of the limited surgical accessibility and proximity. In this report, we analyzed the outcome of GCT treatment in spine. Methods : Between 2000 and 2012, 19 patients received treatment for GCT in spine. Median age at their first diagnosis was 31 years, 10 patients were male, and 9 female. Fourteen tumors were located in the sacrum, 1 in cervical, 1 in thoracic and 3 in lumbar spine. As primary treatment, gross total removal (GTR) was done in 6 patients, and subtotal removal (STR) in 13 patients. Radiation therapy (RT) as an adjuvant therapy was performed in 2 cases in GTR group and 10 cases in STR group. Results : During the follow-up, 7 patients had local recurrence (36.8%). The average period until recurrence after primary treatment was 14 months. No recurrence was detected in GTR group. Recurrence was noted in 7 out of 13 patients who underwent STR. These differences were statistically significant (p=0.024). A median of recurrence free period (RFP) was 84 months. Also average RFP of the RT group was 112 months, and non-RT group was 65 months. These differences were statistically significant (p=0.041). Conclusion : Treatment of choice for GCT in spine is a complete removal of tumor without neurological deficits. In case of incomplete removal, radiation therapy may be a useful adjuvant treatment modality.

• 대한환경공학회지
• /
• 제27권11호
• /
• pp.1141-1145
• /
• 2005

접촉부와 간헐포기부로 구성된 접촉조 결합형 연속회분식반응조를 질소제거를 위해 제안하고 실험적으로 연구하였다. 짧은 체류시간의 접촉반응을 통해 활성슬러지 플록에 유기물질이 생물흡착되지만 불완전 대사가 진행된다는데 근거를 두고 있다. 결과적으로 실하수의 경우 유입 유기물질의 61.2%가 접촉반응 30분 만에 흡착되었다. 유기물질의 비흡착량은 22.3 mg SCOD/g MLVSS였으며, 이는 후속되는 공정에서 탈질효율의 향상에 기여하였다. 연속운전을 통한 전체적인 처리효율은 TCOD/TKN 비가 6이하의 낮은 조건에서도 SCOD 및 T-N 제거율이 각 86%와 60%를 유지하였다.

• Journal of Chest Surgery
• /
• 제6권1호
• /
• pp.41-46
• /
• 1973

This is a report on four cases of atelectasis which were implicated as one case of mucoid impaction and three cases of blood clots in main bronchus. The 1st case was found to be massive atelectasis on Lt. entire lung due to mucoid impaction with pulmonary tuberculosis. This case was performed the Lt. pneumonectomy. There are contain-ing impacted yellowish-gray jelly like thick materials on the Lt. whole bronchial trees and pathologic findings were consistent with tuberculosis including caseation necrosis and multinucleated giant cell on whole left lung thoroughly in microscopic findings. The 2nd and 3rd case [25 years old female and 30 years old female] were diagnosed as one sided entire lung ateletasis which were led by accumulation of old blood clots on bronchus following incomplete expectoration of sudden massive hemoptysis from pulmonary tuberculosis lesion. These two cases were recovered by removal of blood clots and bronchial irrigation under bronchoscopy. Follow up chest film revealed well aeration. The 4th case [45 years old] was taken the removal of old blood clots and tissue debris under the bronchoscopy as bronchial obstruction following massive hemoptysis. The cytologic findings revealed the class III in fresh sputum and class 1V in bronchial irrigation which may suggest of malignancy. However, we could not found the causative lesions suggestive malignancy by the bronchography and other diagnostic measurements.

• 멤브레인
• /
• 제25권1호
• /
• pp.60-66
• /
• 2015

다공성 전극표면에 이온교환고분자를 직접 casting하여 만들어진 복합탄소전극의 성능을 알아보기 위해서 NaCl 수용액을 이용하여 흡착시간, 공급액 농도, 유속, 탈착전압에 따라 흡/탈착실험을 진행하였다. 유입수가 100 mg/L일 때 동일 조건에서 흡착시간이 3분에서 5분으로 증가하면서 제거율이 3% 증가하였는데 이는 유입수의 셀 내부 잔류시간의 증가로 인한 것으로 사료되며 또한 유속이 15 mL/min에서 23 mL/min 증가하면서 효율이 12% 정도 낮음을 보인 것은 유속이 상승하면서 유입수의 셀 내부 잔류시간이 짧아지면서 나타나는 영향으로 사료된다. 유입수의 농도를 200 mg/L로 증가하였을 때 효율은 100 mg/L보다 10~15% 정도 낮은 값을 보였는데, 이는 탈착구간에서 완전탈착이 되지 않아 나타나는 것으로 판단된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.279-285
• /
• 1996

The odontogenic keratocyst(OKC) was used of term and described some of clinical, radiological and microscopic features by Philipsen 1956. The microscopic finding of OKC is characterized by the production of keratin, Which sometimes fills the lumen and thinning of epithelium of cyst. The most clinical importance of OKC is its extraordinary recurrence rate owing to the incomplete removal of the cyst wall. The final diagnosis of OKC should be evaluated by histologic findings and follow-up of any case of OKC with annual roentgenograms and clinical evaluations is essential for at least five years after surgery. This article is report of 2 cases of large OKC involved both molar portion and symphysis of mandible with facial asymmetry, severe bone destruction and paresthesia of lower lip on clinically, roentgenographically. By the postoperative findings the patients showed normal regeneration of bone defect area without recurrence signs by panorama films after surgery.

• Journal of Korean Neurosurgical Society
• /
• 제55권5호
• /
• pp.277-279
• /
• 2014

Autonomic dysreflexia is a clinical emergency syndrome of uncontrolled sympathetic output that can occur in patients who have a history of spinal cord injury. Despite its frequency in spinal cord injury patients, central nervous system complications are very rare. We report a man with traumatic high level incomplete spinal cord injury who suffered hypertensive right thalamic hemorrhage secondary to an episode of autonomic dysreflexia. Prompt recognition and removal of the triggering factor, the suprapubic catheter obstruction which led to hypertensive attack, the patient had a favorable functional outcome after the resorption of the hematoma and effective rehabilitation programme.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.200-205
• /
• 1995

The 1st and 2nd-order grating structure for long wavelength DFB(Distributed FeedBack) laser diodes are successfully fabricated on InP substrates by using electron beam lithography and reactive ion etch techniques, and also characterized non-destructively by diffraction analysis without removal of photo-resis layer. A new composite layer made by lifted-off Cr layer on thin SiO2 film is developed and used as an etch mask, because PMMA, the e-beamresist, is unsuitable for reactive ion etch of InP. In addition, it is experimentally confiremed that diffraction analysis makes it possible to predict the grating parameters, and the analysis can be used as a non-destructive on-line test to prevent incomplete gratings from being successively processed.