• Elastomers and Composites
• /
• v.31 no.5
• /
• pp.347-352
• /
• 1996

A natural rubber was blended with a butadiene rubber with different ratios. A natural rubber, along with three different blends, its ratio varying from 10 to 15 to 20 weight %, were prepared and tested. It was found that inclusion of the butadiene rubber increased cure time, compared to the natural rubber. It is speculated that increased free volume due to the inclusion of butadiene rubber contributed to this effect. Furthermore, inclusion of butadiene rubber led to increase hardness of a sphere, and as a result, the extent of rebound increased sharply.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.469-473
• /
• 2007

For the quantitative analysis of inclusion using OES data, separating of noise and inclusion is needed. In previous methods assuming that noises come from a normal distribution, intensity levels beyond a specific threshold are determined as inclusions. However, it is not possible to classify inclusions in low intensity region using this method, even though every inclusion is an element of some chemical compound. In this paper, we assume that distribution of OES data is a Gaussian mixture and estimate the parameters of the mixture model using EM algorithm. Then, we calculate mixing ratio of noise and inclusion using these parameters to separate noise and inclusion.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.176-181
• /
• 2000

Stress intensity factors for a rigid line inclusion tying along a bimaterial interface are calculated by the boundary element method with the multiregion and double-Point techniques. The formula between the stress intensity factors and the inclusion surface stresses are derived. The numerical values of the stress intensity factors for the bimaterial interface rigid line inclusion in the infinite body are proved to be in good agreement within 3% when compared with the previous exact solutions. In the finite bimaterial systems, the stress intensity factors for the center and edge rigid line inclusions at interface are computed with the variation of the rigid line inclusion length and the shear modulus ratio under the biaxial and uniaxial loading conditions.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.73-85
• /
• 2020

As an effort to achieve sustainable development and increase people's welfare, financial inclusion has become the policy agenda of many countries. Therefore, the effect of financial inclusion on economic growth, poverty, income inequality, and financial stability in several countries in Asia has become the goal and this is the subject of this study. Financial inclusion is measured by 3 dimensions, namely banking penetration, access to banking services, and use of banking services. Poverty ratio below the national poverty line and the Gini coefficient are used as indicators of poverty and income inequality. Financial stability is measured by Bank Z-Score and bank nonperforming loans. The results from the hypothesis test shows that all dimensions of financial stability simultaneously have significant influence on economic growth, poverty, income inequality, and financial stability. On the other hand, the partial impact of financial inclusion dimension on economic growth, poverty alleviation, income inequality, and financial stability in ten countries of Asia has not been optimal. The derived results of this study is required to be interpreted and considered by the Governments of each country in developing strategies for increasing financial inclusion, so that the policy to achieve sustainable development and enhancement of people's welfare can be achieved.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.519-529
• /
• 1997

Volcanic rocks including rhyolitic tuff, rhyolite and welded tuff in the Bupyeong silver mine area form a topographic circular structure which is interpreted as a resurgent caldera. Granitic rocks are emplaced inside and outside area of the circular structure. Pervasive silver mineralization took place in the rhyolitic rock of the southwestern margin of the caldera. Gas and fluid incluson studies were carried out to investigate the petrogenetic evolution and post-magmatic alteration for the rhyolitic and granitic rocks. Gas compositions are characterized by a low $CH_4/CO_2$ ratio (0.004-0.005) for rhyolitic and inside granitic rocks and a high $CH_4/CO_2$ ratio (0.01~0.29) for outside granitic rocks such as the Kimpo and Incheon granites. Homogenization temperature of solid daughter mineral bearing fluid inclusion (III and IV types) and two phase fluid inclusion (I and II types) for quartz in the Bupyeong granites range from 400 to $500^{\circ}C$ and 121 to $514^{\circ}C$, respectively. Salinties vary from 20 to 30 wt% NaCl for type III and IV inclusions and less than 20 wt % NaCl for type I and II inclusions. The fluid inclusion data shows a considerable influx of the meteoric water toward post magmatic alteration stage.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.329-345
• /
• 2017

This paper devoted to study dynamic interaction between crack and inclusion or void by developing the eXtended Finite Element Methods (XFEM). A novel XFEM approximation is presented for these structures containing multi discontinuities (void, inclusion, and crack). The level set methods are used so that elements that include a crack segment, the boundary of a void, or the boundary of an inclusion are not required to conform to discontinuous edges. The investigation covers the effects of a single circular or elliptical void / stiff inclusion, and multi stiff inclusions on the crack propagation path under dynamic loads. Both the void and the inclusion have a significant effect on the dynamic crack propagation path. The crack initially curves towards into the void, then, the crack moves round the void and propagates away the void. If a large void lies in front of crack tip, the crack may propagate into the void. If an enough small void lies in front of crack tip, the void may have a slight or no influence on the crack propagation path. For a stiff inclusion, the crack initially propagates away the inclusion, then, after the crack moves round the inclusion, it starts to propagate along its original path. As ${\delta}$ (the ratio of the elastic modulus of the inclusion to that of the matrix) increases, a larger curvature of the crack path deflection can be observed. However, as ${\delta}$ increases from 2 to 10, the curvature has an evident increase. By comparison, the curvature has a slight increase, as ${\delta}$ increases from 10 to 1000.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.99-104
• /
• 2006

Young's modulus of composite has been predicted by Eshelby's equivalent inclusion method modified with Mori-Tanaka's mean field theory, where short fibers of aspect ratio distribution are assumed to be aligned. Young's modulus of the composite is predicted with the smallest class interval for simulating the actual distribution of fiber aspect ratio, which is compared with that computed using different class intervals. Young's modulus of the composite predicted with mean aspect ratio or the largest class interval is overestimated by the maximum 10%. As the class interval of short fibers for predicting Young's modulus decreases, the predicted results show good agreements with those obtained using the actual distribution of fiber aspect ratio. It can be finally concluded from the study that if and only if the class interval of short fiber normalized by the maximum aspect ratio is smaller than 0.1, the predicted results are consistent with those obtained using the actual distribution of aspect ratio.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.266-271
• /
• 2003

Insoluble polyphenol antioxidants, quercetin and catechin, were stabilized through the complexation with cyclodextrin to increase heat and pH stabilities. Comparison of inclusion complex formabilities of quercetin and catechin with ${\alpha}-,\;{\beta}-$, and ${\gamma}-CDs$ revealed ${\beta}-CD$ to be the most suitable result. Optimal molar mixing ratio of ${\beta}-CD$ and quercetin or catechin for inclusion complex formation was found to be 1 : 1. Inclusion complexation was confirmed using differential scanning calorimetry. Solubility of ${\beta}-CD-antioxidant$ inclusion complexes increased compared with native antioxidants, Stability against temperature and pH of ${\beta}-CD-antioxidant$ inclusion complex analyzed revealed antioxidant activities of ${\beta}-CD-quercetin$ and catechin inclusion complexes have higher stabilization compare to raw quercetin and catechin. Peroxide value of linoleic acid dissolved in water decreased substantionally after using ${\beta}-CD-quercetin$ inclusion complex. ${\beta}-CD-antioxidant$ inclusion complex can be used effectively as a fresh-food preservative.

• Journal of Pharmaceutical Investigation
• /
• v.13 no.1
• /
• pp.10-22
• /
• 1983

The interactions of ${\alpha}-cyclodextrin({\alpha}-CyD)$ and ${\beta}-cyclodextrin({\beta}-CyD)$ with several non-steroidal antiinflammatory drugs were studied on the effects of ${\alpha}-$ and ${\beta}-CyD$ on the solubility of the drugs in aqueous medium. Indoprofen, niflumic acid, alclofenac, and naproxen were chosen as representatives of antiinflammatory drugs. The solubility of all drugs studied increased with the addition of ${\beta}-CyD$, while not with glucose or ${\alpha}-CyD$. The increase of the solubility with ${\beta}-CyD$ was considered due mainly to the formation of inclusion complexes between ${\beta}-CyD$ and drugs. From the solubility data, the apparent stability constants K of the complex could be calculated. Ultraviolet absorption and circular dichroism confirmed the inclusion of indoprofen, niflumic acid and naproxen with ${\beta}-CyD$ in the molar ratio of 1 : 1. Inclusion complexes in solid powder form were obtained by the freeze-drying method and the inclusion formation was confirmed again by infrared, diffential thermal analysis, and X-ray diffraction measurements.

• Journal of Photoscience
• /
• v.3 no.3
• /
• pp.153-158
• /
• 1996

The effects of $\alpha$- and $\beta$-cyclodextrins (CD) on the twisted intramolecular charge transfer (TICT) behavior of p-N,N'-dimethylaminobenzoic acid (DMABA) in buffered aqueous solution have been investigated by examining formation and decay behaviors of the TICT-typical dual fluorescence. The ratio of the TICT emission to the normal emission (I$_a$/I$_b$) increases linearly $\alpha$-CD concentration increases, while in the presence of $\beta$-CD it shows nonlinear dependences on the CD concentration. The analysis of the CD-dependent changes of the I$_a$/I$_b$ and absorption spectra demonstrates formation of 1:1 inclusion complexes between DMABA and CDs. The decay time of the normal emission (ca. 700 ps) is little affected by the formation of $\alpha$-CD inclusion complex, whereas it increases upto ca. 1.6 ns upon formation of $\beta$-CD inclusion complex. The TICT emission for the $\beta$-CD inclusion complex exhibits two decay components while it shows a single component for the $\alpha$-CD inclusion complex, indicating formation of one or two types of inclusion complex in the presence of $\alpha$-CD or $\beta$-CD, respectively. These results are attributed to the CD cavity size dependence on patterns of complexation between CDs and DMABA. The CD size dependences of the TICT fluorescence properties with the orientation of the guest molecule demonstrate that the specific hydrogen bonding between the carboxylic acid group and water plays an important role in the excited-state TICT.