• 한국응용과학기술학회지
• /
• 제9권2호
• /
• pp.181-187
• /
• 1992

This study was designed evaluate the change of fat content according to cooking methods of ground beef. The results are summarized as follows. 1. The fat content of ground beef is the lowest in boiling cooking method. 2. The fatty-acids composition of ground beef is mainly palmitic and oleic acids. The fatty acids hardly change according to cooking methods. 3. P/S ratio is inclined to increase a bit after cooking than pre-cooking. From all the results obtained in this study it can be conclude that fat content is the lowest in boiling and microwaving cooking methods and fatty acid composition is mainly palmitic and oleic acids.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.

• 한국지반공학회논문집
• /
• 제33권10호
• /
• pp.15-24
• /
• 2017

기존 흙막이 공법을 개선함으로, 자립이 가능하게 IER공법이 개발되었다. IER 공법의 안정성은 실내모형실험과 현장실험을 통해서 확인되었다. 특히, 점토지반에서의 실내모형실험의 결과 상당한 변위 감소효과를 확인할 수 있었다. 본 연구에서는 IER을 점토지반에 실제 적용하여 계측데이터를 수집하였으며, 이것을 이용하여 연약점토지반에서의 적용성에 대해 분석하였다. 그리고 수치해석을 통해 동일한 개수의 H-pile이 적용된 일열 H-pile 흙막이에 비해서 IER 공법의 수평변위가 70.9% 감소하는 것을 확인하였다. 그러므로 IER 공법을 연약점토지반에 적용하면 높은 수평변위억제효과로 인해 지반의 안정성은 상당히 많이 증대될 것으로 판단된다. 또, 점토지반에서의 수평변위억제방법으로 전면지주의 근입부에 DCM보강을 제안하여, 수치해석을 통해 DCM 최적의 보강위치를 분석하였다. 그 결과, 굴착저면에서 전면지주의 근입부의 중간지점까지 DCM 보강하는 것을 제안하였다.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.825-844
• /
• 2017

This study aimed to find out the pullout capacity of inclined strip anchor plate embedded in anisotropic and nonhomogeneous fully saturated cohesive soil in undrained condition. The ultimate pullout load has been found out by using numerical lower bound finite element analysis with linear programming. The undrained pullout capacity of anchor plate of width B is determined for different embedment ratios (H/B) varying from 3 to 7 and various inclination of anchor plates ranging from $0^{\circ}$ to $90^{\circ}$ with an interval of $15^{\circ}$. In case of anisotropic fully saturated clay the variation of cohesion with direction has been considered by varying the ratio of the cohesion along vertical direction ($c_v$) to the cohesion along horizontal direction ($c_h$). In case of nonhomogeneous clay the cohesion of the undrained clay has been considered to be increased with depth below ground surface keeping $c_v/c_h=1$. The results are presented in terms of pullout capacity factor ($F_{c0}=p_u/c_H$) where $p_u$ is the ultimate pullout stress along the anchor plate at failure and $c_H$ is the cohesion in horizontal direction at the level of the middle point of the anchor plate. It is observed that the pullout capacity factor increases with an increase in anisotropic cohesion ratio ($c_v/c_h$) whereas the pullout capacity factor decreases with an increase in undrained cohesion of the soil with depth.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.811-824
• /
• 2022

Despite its disadvantages, soft story can reduce the damage to the upper floors by concentrating drift in that specific story provided that large drifts are avoided. Gapped-Inclined Brace (GIB) with reduced P-delta effects and the control of soft story stiffness makes it possible to take advantage of the soft story in buildings and increase their capacity for energy dissipation. OpenSees software is used in this study to validate and modify the GIB model's shortcomings. Also, the analysis method for this element is changed for design. The modified element is evaluated in 3D analysis. Finally, to retrofit an existing building, this element is used. Based on the Iranian seismic code, a six-story reinforced concrete building is modelled and studied with 3D analysis. In this building, the construction shortcomings and elimination of infills on the ground floor cause the formation of a soft story. Results of nonlinear static analysis, nonlinear dynamic, and incremental dynamic analysis using both components of seismic acceleration applied to the structure at different angles and the fragility curves indicate the improvement of the retrofitted structure's performance using the modified element to reach the required performance level following the retrofit code.

• Earthquakes and Structures
• /
• 제22권3호
• /
• pp.319-330
• /
• 2022

Retrofit of soft-story buildings due to seismic loads using Gap-Inclined-Brace (GIB) system is considered a new retrofit technique that aims to maintain both strength and stiffness of structure. In addition, it provides more ductility and less P-delta effect, and subsequently better performance is observed. In this paper, the effect of the eccentricity between GIB and the retrofitted column due to installation on the efficiency of the retrofitting system is studied. In addition, a modification in the determination method of GIB properties is introduced to reduce the eccentricity effect. Also, the effect of GIB system on the seismic response of mid-rise buildings with different heights considering soft-story at various heights has been studied. A numerical model is developed to study the impact of such system on the response of retrofitted soft-story buildings under the action of seismic loads. To achieve that goal, this model is used to perform a numerical investigation, by considering five case study scenarios represent several locations of soft-story of two mid-rise reinforced concrete buildings. At first, Non-linear static pushover analysis was carried out to develop the capacity curves for case studies. Then, Non-linear time history analyses using ten earthquake records with five peak ground accelerations is performed for each case study scenario before and after retrofitting with GIB. The results show that large GIB eccentricity reduce the ultimate lateral resistance and deformation capacity of the retrofitting system. Moreover, the higher the retrofitted building, the more deformation capacity is observed but without significant increase in ultimate lateral resistance.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.359-371
• /
• 2005

The Cutting slope is to be minimized when a tunnel meets the contour of slope terrain at a right angle around its portal. However, a tunnel portal has been generally installed at a right angle to the longitudinal axis of a tunnel with no consideration of the intersection angle with the slope terrain. This sometimes tended to cause huge cutting slope that resulted in many disadvantage in terms of safty, economy and environment. Therefore, the minimization of cutting slope is studied by taking the intersection angle into account, and the result is compared with that by the conventional method. In addition a design method for the inclined portal to the tunnel axis is proposed through 3D-FEM analysis, also the applicable ground condition is suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.201-207
• /
• 1999

The automatic pinhole detection system is described. The goal of this project is to study the feasibility test of the new concept for hole detection. The developed method is able to detect almost 50$\mu\textrm{m}$ pinhole by evaluating the shining of the light as if there is pinhole in the strip. Moreover, it is possible to inspect up to the 200$\mu\textrm{m}$ inclined pinhole. The system cosists of three main functional parts: the source part of the light which is using the linear halogen lamp, the image gathering part which is using a line CCD and the image processing part. The light spot can be controlled and optimized corresponding to the situation of the strip. To eliminate back ground noise, the binary image processing method is adopted.

• 한국터널지하공간학회 논문집
• /
• 제19권5호
• /
• pp.761-778
• /
• 2017

도시 내에서 기반시설을 확충하기 위해 지하공간의 활용이 급증하고 있으며, 이에 따라 얕은터널의 수요가 늘고 있다. 도시 내 얕은터널은 자체 안정성 뿐만 아니라 상부 건축물과 터널 주변 지중매설물의 안전성도 확보해야 하는 특성이 있다. 지금까지 얕은터널에 대한 연구는 천단부나 측벽부 등 국부적 변형에 따른 주변지반 거동에 집중되었고 터널 전체의 변형에 따른 주변지반의 거동을 연구한 예가 거의 없다. 따라서, 본 연구에서는 터널 전체의 변형에 의해 발생되는 주변지반 거동의 모형시험을 수행하여 분석하고 그 안정성을 검토하였으며, 이를 위해 터널 상부지표의 경사와 토피별로 구분하여 모형시험을 수행하였다. 모형터널(폭 300 mm, 높이 200 mm)은 도로 2차선 터널 단면을 기준으로 수직 수평방향으로 동시에 내공변위가 일어나도록 제작하였으며, 모형지반은 3가지 규격(직경 4 mm, 6 mm, 8 mm)의 탄소봉으로 조성하였고, 터널 전체를 변형시키면서 터널 토피와 상부지표의 경사에 따른 지표침하, 천단하중, 측벽하중, 하중전이를 측정하였다. 그 결과 얕은터널의 지표침하는 터널상부에서 가장 크게 발생하였고, 터널에서 멀어질수록 감소하여 일정영역을 벗어나면 발생하지 않았으며, 경사지에서는 토피가 높은 곳의 지표침하가 넓게 나타났다. 천단하중과 측벽하중은 지표경사의 영향이 뚜렷하였으나 토피가 일정깊이 이상이면 지표경사의 영향을 받지 않았다. 터널의 하중전이는 수평지표에서는 토피가 높을수록, 경사진 지표에서 지표가 높을수록 하중전이 폭이 넓고 크기가 작게 나타났으며, 경사진 지표 하부 얕은 터널에서는 토피가 낮은 쪽의 터널 측벽부 주변 하중전이가 뚜렷하게 나타났다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.103-106
• /
• 1999

The Tropical Rainfall Measuring Mission(TRMM) is a United States-Japan project for rain measurement from space. The first spaceborne Precipitation Radar(PR) has been installed aboard the TRMM satellite. The ground based validation of the TRMM satellite observations was conducted by TRMM science team through a Global Validation Program(GVP) consisted of 10 or more ground validation sites throughout the tropics. However, TRMM radar should always be validated and assessed against reference data to be used in Korean Peninsula because the rainrates measured with satellite varies by time and space. We have analyzed errors in the comparison of rainrates measured with the TRMM/PR and the ground-based instrument i.e. Automatic Weather System(AWS) by means of statistical methods. Preliminary results show that the near surface rainrate of TRMM/PR are highly correlated with ground measurements especially for the very deep convective rain clouds, though the correlation is changed according to the type and amount of precipitating clouds. Results also show that TRMM/PR instrument is inclined to underestimate the rainrate on the whole over Korea than the AWS measurement for the cases of heavy rainfall.