• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.163-173
• /
• 2005

The purpose of this study was to compare the asymmetric degree between maxillofacial hard and soft tissues in individuals with facial asymmetry. Computerized tomographies (CT) of 34 adults (17 male, 17 female) who had facial asymmetry were taken. The CT images were transmitted to personal computers and then reconstructed into three-dimensional (3D) images through the use of computer software. In order to evaluate the degree of facial asymmetry, 6 measurements were constructed as the hard tissue measurements while 6 counterpart measurements were taken as the soft tissue measurements. The means and standard deviations were obtained for each measurement using 3D measure, then t-test was used to investigate the differences between each hard tissue measurement and the corresponding soft tissue measurement All measurements used in the present study showed statistically significant differences between the hard and soft tissues. The degree of soft tissue asymmetry was smaller than that of corresponding hard tissue asymmetry in case of chin deviation, frontal ramal inclination difference, and frontal corpus inclination difference. On the other hand, the degree of soft tissue asymmetry was greater than that of underlying hard tissue asymmetry in the measurement of lip canting and lip cheilion height difference The present study suggests that asymmetric differences of hard and soft tissue is observed nu facial asymmetric subjects and thus soft tissue analysis is needed in addition to hard tissue analysis when making an evaluation of facial asymmetry.

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.911-920
• /
• 2013

Experimental studies on both subcooled and saturated pool boiling of water were performed to obtain local heat transfer coefficients on a $3^{\circ}$ inclined tube of 50.8 mm diameter at atmospheric pressure. The local values were determined at every $45^{\circ}$ from the very bottom to the uppermost of the tube periphery. The maximum and minimum local coefficients were observed at the azimuthal angles of $0^{\circ}$ and $180^{\circ}$, respectively, in saturated water. The locations of the maxima and the minima were dependent on the inclination angle of the tube as well as the degree of subcooling. The major heat transfer mechanisms were considered to be liquid agitation generated by the sliding bubbles and the creation of big size bubbles through bubble coalescence. As a way of quantifying the heat transfer coefficients, an empirical correlation was suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.78-85
• /
• 2005

A numerical calculation is performed to study the effects of buoyancy force on the heat transfer characteristics of laminar forced convection flow in inclined parallel plates with the upper part cooled and the lower Part heated uniformly. Numerical results are presented for the Reynolds number ranges from $4.0\times10^{-3}$ to $1.13\times10^{-1}$. the angle of inclination, $\theta$. from 0 to 90 degree and Pr of the high viscosity fluid is 909. It is found that the flow pattern of mixed convection in inclined parallel Plates can be classified into four patterns which affected by Reynolds number and the angle of inclination.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.55-63
• /
• 1976

This study was undertaken to establish the roentgenocephalometric standards of the Korean children in Hellman dental age III C. The subjects consisted of 33 males and 33 females with the normal occlusion and acceptable profile. The lateral cephalometric films were taken with the teeth in centric occlusion, the soft tissue outline of the nose, lips, and chin was made visible by the low-speed films, 70Kvp, 100Mas. Their linear and angular measurements were performed by Jarabak's methods. The following results were obtained; 1) The author made the tables of standard deviation from the measured values. 2) Each linear measurement of the skull was greater in males than in females. 3) The maxillary basal bones were more protrusive in Korean children than in Caucasian. 4) The degree of the facial convexity was larger in Korean children than in Caucasian. 5) The labial inclination of the upper & lower incisors was greater in Korean children than in Caucasian. The labial inclination of the upper incisor was greater in females, but the labial inclination of the lower incisor was greater in males.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.27-32
• /
• 2011

Most of domestic building generally don't have fixed shading devices considering of appearance and aesthetic issues. In this study is suggested that tilt window simultaneously has a role of shading and blocking solar radiation. The tilt window thermal performance is investigated by relation ship between inclination and heating cooling road. As comparing vertical window with $5^{\circ}$ and $7^{\circ}$ of tilt window respectively, the heating load is increased by 3.6% and cooling load is reduced by 8.1% on $5^{\circ}$ tilt window and the heating load is increased by 5.3% and cooling load is reduced by 11.5% on $5^{\circ}$ tilt window. Especially, the total load of alternative tilt window is showed the reduction rate 2.6% and3.6% compared of vertical window. Therefore, the tilt window is possible to role of shading of solar radiation and reduction of heating and cooling load.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.323-335
• /
• 1998

Clinically, the curve of Spee is widely applied as a determined level of the occlusal curvature when the oral rehabilitation and the reconstruction of the prosthesis is needed at the malalignment dentition due to the missing, extrusion, and the inclination of the teeth. The purpose of this study was to analyze the curve of Spee of the occlusal curvature which influences to the occlusal form and the location three dimensionally, and then was to measure the radius and the degree of curvature of the curve of Spee and also was to investigate the influence to the cuspal inclination according to the change of the inclination of the curve of Spee which was analyzed by AutoCAD R.13 program at the gnathological cast and the cephalometric radiograph. The following results were obtained : 1. The radius of the curve of Spee was the mean of $11.74{\pm}3.64cm$ in the model, $12.75{\pm}4.63cm$ in the radiograph and there was no significant difference statistically between the model and the radiograph(P>0.001). 2. The radius and the degree of curvature of the curve of Spee showed negative correlation(r=-0.80), while the radius and the degree of curvature of the curve of Spee in relation to the length of the curve of Spee did not show correlation. 3. The case of the curve of Spee inclined to the posterior, that is. $Post.M{\theta}$ group showed the mean of $4.73{\pm}3.64$, positive correlation to the P2m, M1mm, M1dm, M2dm, and especially the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.70). 4. The case of the curve of Spee inclined to the anterior, that is, $Ant.M{\theta}$ group showed the mean of $3.28{\pm}3.59$, positive correlation to the P2m, M1mm, and also the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.78

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.2
• /
• pp.219-225
• /
• 1990

Panoramic radiography is convenient in clinic and visualizes those areas which other technique do not give. But the technique has limitation of image distortion which results from the relationship of the ramus to the focal trough and from the direction of the central ray. This study is, using 7 dry skulls, to determine the effect of rotation of patient's head on reducing those distortion and determine the magnification ratio of images of mandibular condyle in rotated patient head position. The obtained results were as follows: 1. Generally, in panoramic radiography the anterolateral portion of the mandibular condyle was best to be visualized. 2. There are no significant difference between the image readability of anteromedial portion and that of anterocentral portion of the mandibular condyle. 3. Anterolateral portion of the mandibular condyle was better visualized in rotated head position by 20 degree or horizontal condylar inclination than in conventional position or in rotated head position by 10 degree. 4. The magnification ratio of the anteroposterior diameter in the image of mandibular condyle was least in the rotated head position by horizontal inclination of the mandibular condyle and was largest by 20 degree.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.640-655
• /
• 2003

Statement of problem : The beauty has a little different meaning according to a time, culture, and nation. Purpose : This study was undertaken to determine the Korean perception of the altered upper anterior dental esthetics including the lack of symmetry, the midline deviation, the gingival exposure, the inclination of incisal plane, the type of incisal plane, and the type of gingival line. Material and Method : 670 subjects were participated in this survey. A questionnaire accompanied by 12 sets of computer-manipulated images using 3D MAX 4.2 software was used to record the ranking of the geometric preference related to the anterior esthetic discrepancies in three or four degrees of alteration. The statistical significance of the differences between the groups was determined by a one-way ANOVA and a t-test. Results : The results obtained were as follows: 1) The Korean perception of the anterior dental esthetics according to the subjects' occupation, sex, and age was most affected by occupation. 2) The masked image emphasizing the dentition and lips appeared stranger than the non-masked image at the same alteration. 3) The lack of symmetry, which was expressed as a unilateral discoloration of the tooth, showed incongruity in any teeth of the anterior dentition. The incongruity was more severe as the degree occurred closer to the midline. 4) The deviation of midline was showed more severe strangeness as the degree of deviation increased. However, more than half of the subjects did not perceive a deviation of 5mm. 5) During smiling, the exposure of the upper gingiva showed more severe incongruity as the degree of gingival exposure increased. 77% of the subjects perceived strangeness at the gingival exposure of 4.5mm. 6) The inclination of the incisal plane appeared stranger as the degree of inclination increased. 62% of subjects perceived strangeness at the $7.5^{\circ}$ inclination of the incisal plane. 7) The type of incisal plane showed increasing strangeness in the order of convex/downward, straight/horizontal, and concave/upward. 80% of subjects perceived strangeness at concave/upward. 8) The type of gingival line was showed increasing incongruity in the order of the same, a little above, and a little under the zenith of the lateral incisor to the line joining the zenith of the central incisor and the canine. However, less than half the subjects did not perceive strangeness at any alteration of the gingival line. Conclusion : The Korean perception of the upper anterior dental esthetics was different to the westerner's perception in the some respects.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.698-706
• /
• 2006

Experiment and numerical calculation have been peformed to investigate mixed convection heat transfer between inclined parallel plates. Particle image velocimetry (PIV) with thermo-sensitive liquid crystal (TLC) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature fields at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. The governing equations are discretized using the finite volume method. The results are presented for the Reynolds number ranges from 0.004 to 0.062, the angle of inclination, ${\Theta}$, from 0 to 45 degree and Prandtl number of the high viscosity fluid is 909. The results show velocity, temperature and mean Nusselt numbers distributions. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}{\Theta}<30^{\circ}$, Re<0.062, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.544-553
• /
• 2005

In this paper, the research has been done to develop the inclination test items to form the desirable online learning community in which social interaction may be maximized, dropout rate lowered and learners' feeling of isolation eliminated. Once developed, the inclination test items have been classified into homogeneous ones and heterogeneous ones. And on the basis of the results of this research, Intelligent agent based Inclination Test Grouping e-learning System(IIGS) has been developed, which can perform automatic grouping of online leaning community by intelligent agent. The results of this research with 1,000 teachers in reality by means of developing the grouping system have shown that 151 groups are automatically formed. Among them, 34% have shown very high degree of learning satisfaction and intended to maintain the groups in the future.