• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.18-26
• /
• 2021

The effect of heavy construction equipment on the excavated slope is investigated by slope stability analysis. A mobile crane with 500 kN capacity is applied as a working load to the background surface of the excavated slope, in both sandy soil and clay, designed to guarantee the safety of slope stability. Major parameters such as the distance between the edge of the slope and the mobile crane, groundwater level, and ground plate size of the mobile crane are considered. Only 23.8% and 14.3% of the analysis models with sandy soil and clay excavated slope, respectively, satisfied the slope stability. By changing the slope of the sandy soil from 1:1.0 to 1:1.2, the number of analysis models securing slope stability increased from 23.8% to 40.5%. For the clay excavated slope, the analysis models securing slope stability increased from 14.3% to 42.9% by changing slope inclination from 1:0.8 to 1:1.2. In addition, it is found that the increase in the size of the ground plate of the mobile crane increases the analysis models that secure slope stability. Therefore, it is an effective way to relax the excavated slope's inclination angle and simultaneously increase the ground plate size to guarantee stability.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.273-281
• /
• 2005

The weight of spectacles fined on is resolved into its components along the nose's slide plane and the normal to the nose plane where the nosepad is located. The equation and its numerical solution to determine the component force was derived as a function of splay angle ${\Psi}$, $sin{\Psi}$, $cos{\Psi}$, and $cot{\Psi}$, incorporated with ${\theta}$ and ${\Phi}$, the angles viewed from side and front of the face, respectively. Values of inclination angle ${\theta}$ and ${\Phi}$ could be obtained to fulfill the condition where the frictional force between the nose and pad is either greater than the normal pressure exerted by the spectacles on the nose. With the value of ${\theta}$ fixed the normal pressure increases as ${\Phi}$ increases. With ${\Phi}$ fixed, the effect of ${\theta}$ is the same.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.3
• /
• pp.207-210
• /
• 2013

Objective : To compare spinopelvic parameters in young adult patients with spondylolysis to those in age-matched patients without spondylolysis and investigate the clinical impact of sagittal spinopelvic parameters in patients with L5 spondylolysis. Methods : From 2009 to 2012, a total of 198 young adult male patients with spondylolysis were identified. Eighty age-matched patients without spondylolysis were also selected. Standing lateral films that included both hip joints were obtained for each subject. Pelvic incidence (PI), sacral slope (SS), pelvic tilt, lumbar lordosis angle, sacral inclination, lumbosacral angle, and sacral table angle were measured in both groups. A comparative study of the spinopelvic parameters of these two groups was performed using SPSS 15.0 (SPSS Inc., Chicago, IL, USA). Results : Among the aforementioned spinopelvic parameters, PI, SS and STA were significantly different between patients with spondylolysis and those without spondylolysis. PI and SS were higher in the spondylolysis group than in the control group, but STA was lower in the spondylolysis group than in the control group. Conclusion : PI and SS were higher in the spondylolysis group than in the control group, but STA was lower in the spondylolysis group than in the control group. Patients with spondylolysis have low STA at birth, which remains constant during growth; a low STA translates into high SS. As a result, PI is also increased in accordance with SS. Therefore, we suggest that STA is an important etiologic factor in young adult patients with L5 spondylolysis.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.301-310
• /
• 2001

Gypsum blocks with sixteen flaws have been prepared and tested in uniaxial compression. Results from these experiments are compared with observations from the same material with two and three flaws. The results indicate that the cracking pattern observed in specimens wish multiple flaws is analogous to the pattern obtained in specimens with two and three flaws such as initiation and propagation of wing, and secondary cracks and coalescence. Wing cracks initiate at an angle with the flaw and propagate in a stable manner towards the direction of maximum compression. Secondary cracks initiate and propagate in a stable manner. As the load is increased, secondary cracks may propagate in an unstable manner and produce coalescence. Two types of secondary cracks are observed: quasi-coplanar, and oblique secondary cracks. Coalescence is produced by the linkage of two flaws: wing and/or secondary cracks. From the sixteen flaws test, four types of coalescence are observed. Observed types of coalescence and initiation stress of wing and secondary crackle depend on flaw geometries, such as spacing, continuity, flaw inclination angle, ligament angle, and steppings.

• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2007

As a part of the study for the materials development of compound feelings, therefore, this study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the dyeing of cotton and PET fabrics individually with the same color, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Second, in the case of the dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the color of cotton fiber, which is warp, gave much influence. In addition, the color change was remarkable among complementary colors, while it was negligible among adjacent colors. Third, in the case of dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the results were different by the measuring angle. When PET was fixed in green and cotton was dyed in ten colors, color-deepening was observed by the inclination in the direction of warp and weft without the dominance over all colors like cotton. When cotton was dyed in red and PET in ten colors, the color of PET appeared dimly in the horizontal case by the direction of the light, and red appeared as inclined in the direction of warp and weft. This is because of the dominance of cotton color over the overall color, since the density of cotton fiber, the warp of union fabrics, is higher than that of PET, the weft. Thus, this is to be considered in the selection of the warp's color. In view of the above results, the color changes are outstanding when the color of warp dominates the overall color and when the colors of warp and weft are complementary, in comparison with the case when the colors are adjacent. The colors also change by the measuring angle.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.95-102
• /
• 2014

Purpose: This study was performed to evaluate the reproducibility of panoramic radiographs of dentulous and edentulous patients. Materials and Methods: The reproducibility of panoramic radiographs was evaluated using the panoramic radiographs acquired from 30 anterior dentulous patients by using a common biting positioning device (dentulous group) and 30 anterior edentulous patients by using chin-support devices to take a panoramic radiograph (edentulous group), respectively; these patients had undergone 3 or more panoramic radiographs. The widths and angles between the designated landmarks were measured on the panoramic radiographs, and the reproducibility was evaluated using the intraclass correlation coefficient (ICC) and the coefficient of variation. Results: In the dentulous and edentulous groups, the ICCs of the mandibular ramus and mandibular angle areas were higher than the condylar head and zygomatic areas. The mandibular ramus and angle areas showed statistically lower mean coefficients of variation than the condylar head and zygomatic areas in the dentulous group. The mandibular angle area showed a significantly lower mean coefficient of variation than the zygomatic area in the edentulous group. By comparing the two groups, each ICC of the edentulous group was lower than that of the dentulous group, and the mean coefficients of variation of the mandibular ramus area, zygomatic area, left condylar inclination, and ramus ratio between the right and the left in the edentulous group were significantly higher than those in the dentulous group. Conclusion: Biting positioning for dentulous patients provided better positioning reproducibility than chin-support positioning when performing panoramic radiography for edentulous patients.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.290-297
• /
• 1998

In this study an optimization of greenhouse roof shape was performed to maximize solar light transmission which is one of the most important elements in greenhouse environment. To determine roof shape that maximize the total light transmissivity, a computer model for analysing light transmissivity was composed and the Genetic Algorithms was applied for solving optimization problems. By setting composite model as objective function(fitness function), the optimum combination of design variables(roof inclination angle, width ratio) was searched using Genetic Algorithms. The optimum combination of input variables for the maximum light transmissivity at Suwon in winter was found 40 degree root angle , 0.5 width ratio, for two span greenhouses and 37 $_。 / roof angle, 0.7 width ratio, for single span greenhouses.es.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.95-113
• /
• 2006

This study was conducted comparative analysis of juvenile brassiere and adult brassiere to identify the problems of brassieres on the market. The raw data for this study was processed by SPSS 10.1 version(statistical software) and the results of this study can be summarized as follows. 1) The result of comparative analysis of juvenile brassiere and adult brassiere pattern is that each pattern showed no difference. 2) The results of the comparative analysis of juvenile and adult brassiere pattern in wing's length and angle is that even though there are some difference between juvenile and adult in side line inclination of brassiere. there is no setting difference but size of that brassiere. 3) The result of a comparative analysis pattern and cup size measurement of juvenile brassiere and adult brassiere is that even though the adult cup girth and angle is bigger than the juvenile because adults have more protrusive and bigger volume and well developed breast, some case rather the adult's cup angle is smaller than the juvenile as brand. And as we grow up to be a woman, difference of lower breast girth and breast girth are become big while difference of upper breast girth and breast girth are become small for that reason upper cup must be lower and lower cup must be higher but there is almost no difference between adult and juvenile. 4) The result of a comparative analysis of juvenile brassiere and adult brassiere bust point of the pattern is that adult brassiere's distance between bust points 6.12cm, and juvenile's 5.6cm, there are only 0.52cm difference between two products and just 0.4cm, size grading. These results are explained that even though when grow up to be a woman the distance between two bust points become to be long and breast toward out side but brassiere size don't vary with body characteristic.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.4
• /
• pp.327-339
• /
• 1992

This study was undertaken to investigate the effect of orthognathic surgery on occlusal force. The maximum bite force was measured in 26 dentofacial deformity patients, aged 14-26(mean age 20.3) years, before surgery and at IMF removal, 3, 6, and 12months postsurgery. To grope the correlation of bite force and skeletal change after orthognathic surgery, the cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. The presurgical maximum bite force was 13.7kg in upper first molar(rt. Side 12.7kg, it. Side 14.6kg). There was remarkable difference with that of normal occlusion. 2. The recovery of bite force was very significant in according to the operation method and the duration of IMF that was 7.6kg at IMF removal, 14.2kg at 3 months, 19.7kg at 6 months. 26.1kg at 12 months postsurgery. 3. To fasten the recovery and to increase the bite force after orthognathic surgery, the long IMF time and the injury to the masticatory muscle should be avoided by the internal rigid fixation and early physical exercise. 4. The bite force was positively correlated to the changes of mandibular plane angle, the angle between platatal plane and mandibular plan, the angle between occlusal plane and mandibular plane, and negatively correlated to the changes of mandibular body length in craniofacial structure. 5. There was no correlationship between bit force and mesial inclination of tooth long axis of first molar in this subject. 6. There was no correlation between the changes of bite force and the changes of mechanical advantage of the temporal and masseter muscle.