• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.4
• /
• pp.395-406
• /
• 2020

The objectives of this study were to develop the optimal structures of recirculating aquaculture tank for improving the removal efficiency of solid materials and maintaining water quality conditions. Flow analysis was performed using the CFD (computational fluid dynamics) method to understand the hydrodynamic characteristics of the circular tank according to the angle of inclination in the tank bottom (0°, 1.5° and 3°), circulating water inflow method (underwater, horizontal nozzle, vertical nozzle and combination nozzle) and the number of inlets. As the angle in tank bottom increased, the vortex inside the tank decreased, resulting in a constant flow. In the case of the vertical nozzle type, the eddy flow in the tank was greatly improved. The vertical nozzle type showed excellent flow such as constant flow velocity distribution and uniform streamline. The combination nozzle type also showed an internal spiral flow, but the vortex reduction effect was less than the vertical nozzle type. As the number of inlets in the tank increased, problems such as speed reduction were compensated, resulting in uniform fluid flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.8
• /
• pp.1131-1139
• /
• 2001

Experimental results are presented, which describe the effect of blowing ratio on film cooling from two rows of holes with opposite orientation angles. The inclination angle is fixed at 35°, and the orientation angles are set to be 45°for the downstream row, and -45°for the upstream row. The studied blowing ratios are 0.5, 1.0 and 2.0. The boundary layer temperature distributions are measured using thermocouple at two downstream locations. Detailed adiabatic film cooling effectiveness and heat transfer coefficient distributions are measured with TLC(Thermochromic Liquid Crystal). The adiabatic film cooling effectiveness and heat transfer coefficient distributions are discussed in connection with the injectant behaviors inferred from the boundary layer temperature distributions. Film cooling performance, represented by heat flux is evaluated from the adiabatic film cooling effectiveness and heat transfer coefficient data. The results show that the investigated geometry provides improved film cooling performance at the high blowing ratios of 1.0 and 2.0.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.113-118
• /
• 2000

Experimental results describing the effects of blowing ratio on film cooling from two rows of holes with opposite orientation angles are presented. The inclination angle was fixed at $35^{\circ}$ and the orientation angles were set to be $45^{\circ}$ for downstream row. and $-45^{\circ}$ for upsream row. The studied blowing ratios were 0.5, 1.0 and 2.0. The boundary layer temperature distributions were measured using thermocouple at two downstream loundary layer temperature distributions were measured using thermocouple at two downstream locations. Detailed adiabatic film cooling effectiveness and heat transfer coefficient distributions were measured with TLC(Thermochromic Liquid Crystal). The adiabatic film cooling effectiveness and heat transfer coefficient distributions are discussed in connection with the injectant behaviors inferred from the boundary layer temperature distributions. Film cooling performance, represented by heat flux was calculated with the adiabatic film cooling effectiveness and heat transfer coefficient data.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.148-157
• /
• 1997

In this paper, the flow around a V-shaped plate positioned against horizontal flow is numerically simulated by using finite volume method and experimentally visualized in two dimensional tank by dye injection method. The upwelling flow artificially induced by V-shaped plate mixes the stratified stagnant flow. It can be applied to mitigate the eutrophication and stratification of sea in the vicinity of offshore structures.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.4
• /
• pp.19-24
• /
• 2003

In end milling process, which is characterized by the use of a rotating tool, the undeformed chip thickness varies periodically with phase change of the tool. Although many efforts have concentrated on the study of end milling process, the analysis of shear and chip-tool friction behaviors has not been reported. Recently, a model has been proposed to simulate the shear and friction characteristics of an up-end milling process in terms of the equivalent oblique cutting. In the current study, the varying undeformed chip thickness and the cutting forces in a down-end milling process are replaced with the equivalent ones of oblique cutting. Then it is possible to simulate the shear and the chip-tool friction characteristics of a down-end milling process. The proposed model has been verified through two sets of cutting tests i.e., down-end milling and the equivalent oblique cutting tests. The experimental results show that the proposed model is suitable to analyze the shear and chip-tool frictional characteristics of down-end milling process. The specific cutting energy decreases with increase in equivalent undeformed chip thickness in a down-end milling process.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.672-678
• /
• 2010

The purpose of this study is to develop a stacking guidance system (SGS) of containers in the mobile harbor (MH). A mobile harbor is a floating structure especially designed for loading and unloading containers from and to a large container ship. A novel stacking guidance system was proposed for unloading the container in an effective way against possible vibrations of the floating body. The guidance system works as an aid for loading containers with a wider opening for easier stacking of a container into a moving storage cell due to waves. In order to determine the most effective inclination angle of the cell-guide, this study performed the dynamic analysis of the SGS equipped in the MH subject to fluctuations of the sea. The motions of the guidance system and a container loaded were calculated using ADAMS. The simulation results of the contact force between the two rigid bodies showed that a desirable angle of the cell-guide should be around 20 degrees from the vertical. This proposed SGS can considerably reduce the loading and unloading time, and will enhance the performance of the MH.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.229-237
• /
• 1985

The Purpose of this study was to investigate the differences in soft tissue characteristics according to the dental or skeletal dysplasia. For this purpose, lateral cephalogram of 153 children (Hellman dental age IIIB: control group 32, Angle CIII. div. 1 malocclusion group 55, Angle Cl III group 66) were traced and measured. For these measurements, following conclusions were made. 1. FH A, FH Sn, FH UL, AA' of the Class III group were thicker than those of the normal and Class II group, but FH B, FH LL, BB' of the Class III group were not significantly different from those of the normal group. 2. FH B, FH LL, BB' of the Class II group were thicker than those of the normal and Class III group, but FH A, FH Sn, FH UL, AA' of the Class II group were not significantly different from those of the noraml group. 3. Ans-Sn, FH P were not significantly different in three groups, while PP' of the Class III group was thicker than those of the other groups. 4. The lower lips of the Class II group were more anterioly everted with respect to the lower incisor inclination than those of the other groups. 5. The severity of skeletal dysplasia was partly camouflaged by the soft tissue.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.450-456
• /
• 2006

In this paper, we report the changes of morphology, transmittance and photoluminescence (PL) in hydrogenated amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ thin films, thermally deposited at the vapor incidence angles (${\theta}$) of $0^{\circ},\;45^{\circ}\;and\;80^{\circ}$. The hydrogenation was carried out under the condition of a $H_2$ pressure ($P_H$) of 20 atm and an annealing temperature range, $T_{Anneal}$ of $150^{\circ}C{\sim}210^{\circ}C$. A columnar structures with an inclination angle of approximately $65{\sim}70^{\circ}$ was formed in $80^{\circ}$-deposited films and then the columnar was broken after hydrogenation. Transmittance increases with an increase of deposition angle and by the hydrogenation. In particular, a broad PL band on the extended region is observed in obliquely deposited films and it increases during the hydrogenation.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.19-25
• /
• 2004

The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing photovoltaic modules. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, an4 the solar azimuth angles are needed for these solar photovoltaic systems. This is because the performance of the solar photovoltaic systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the an91e of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal photovoltaic modules.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.12-23
• /
• 2001

The research focused on the landscape of mountains and hills drawn in a landscape picture. The purpose of the research is to classify patterns of landscape drawning in landscape pictures and to clarify the characteristics of the pattern by a quantitative index. We selected 21 landscape pictures to understand the Landscape Setting Here(LSH) and Landscape Setting These(LST). We investigated size quantitative indices using 1 landscape picture. The index is a follow: altitude, Visual Distance, Angles, Angle of Appearance Size, Inclination, and Angle of Incidence. The following results were obtained by using this data. 1) It has been understood that we offer an important city view because the LSH of this research can establish understanding of the city structure. 2) We dividing 3 patterns by the LST space drawn in the landscape picture. 3 patterns are Ferry point, Beauty point, an Signal-fire point. 3) We clarified the landscape characteristics of each pattern and the characteristics between patterns by using the index according to this pattern. 4) We understood the problem concerning the Seoul city landscape examining the pattern of this research with the ordinance of Seoul city. It is necessary to standardized a system of pattern classification utilized in landscape pictures to establish a universally interpreted detailed quantitative index, which can be applied to research.