• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2016

In this paper, a hardware design method is proposed for high speed high precision neutron radiation measurements. Our system is fabricated to use a high performance A/D Converter for digital data conversion of high precision and high speed analog signals. Using a neutron sensor, incident neutron radiation particles are detected; a precision microcurrent measurement module is also included: this module allows for more precise and rapid neutron radiation measurement design. The high speed high precision neutron measurement hardware system is composed of the neutron sensor, variable high voltage generator, microcurrent precision measurement component, embedded system, and display screen. The neutron sensor detects neutron radiation using high density polyethylene. The variable high voltage generator functions as a 0 ~ 2KV variable high voltage generator that is robust against heat and noise; this generator allows the neutron sensor to perform normally. The microcurrent precision measurement component employs a high performance A/D Converter to precisely and swiftly measure the high precision high speed microcurrent signal from the neutron sensor and to convert this analog signal into a digital one. The embedded system component performs multiple functions including neutron radiation measurement for high speed high precision neutron measurements, variable high voltage generator control, wired and wireless communications control, and data recording. Experiments using the proposed high speed high precision neutron measurement hardware shows that the hardware exhibits superior performance compared to that of conventional equipment with regard to measurement uncertainty, neutron measurement rate, accuracy, and neutron measurement range.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.42-50
• /
• 2019

As the industry develops in Korea, the use of hazardous chemicals is increasing rapidly and chemical accidents are increasing accordingly. Most of the chemical accidents are caused by leaks of hazardous chemicals, but there are also accidents in which all the substances are released instantaneously due to sudden high temperature/pressure or defection of the storage tanks. This is called catastrophic failure and its frequency is very low, but consequence is very huge when it occurs. In Korea, there were 15 casualties including three deaths due to catastrophic rupture of water tank in 2013, and 64 instances of failures from 1919 to 2004 worldwide. In case of catastrophic failure, it would be able to overflow outside the bund that reduces the evaporation rate and following consequence. This incident is called overtopping. Overseas, some researchers have been studying the amount of external overflow depending on bund conditions in the event of such an accident. Based on the previous research, this study identified overtopping fraction by condition of bund in accordance with Korea Chemicals Controls Act Using CFD simulation. As a result, as the height increases and the distance to the facility decreases while meeting the minimum standard of the bund capacity, the overtopping effect has decreased. In addition, by identifying the effects of overtopping according to atmospheric conditions, types of materials and shapes of bunds, this study proposes the design of the bund considering the effect of overtopping caused by catastrophic failure with different bund conditions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.308-320
• /
• 2021

An integrated sediment management approach that includes the recovery of the amount of declined sediment supply is effective as a fundamental solution to coastal erosion. During planning, it is essential to analyze the transfer mechanism of the sediments generated from estuaries (the junction between a river and sea) to assess the amount and rate of sediment discharge (from the river to sea) supplied back to the coast. Although numerical models that interpret the tidal sand bar flushing process during flooding have been studied, thus far, there has been no study focusing on the formation and development processes of tidal sand bars. Therefore, this study aims to construct wave deformation, flow regime calculation, and topographic change analysis models to assess the amount of recovered sediment discharge and reproduce the tidal sand bar formation process through numerical analysis for integrated littoral drift management. The tidal sand bar formation process was simulated, and the wave energy and duration of action concepts were implemented to predict the long-term littoral movement. The river flux and wave conditions during winter when tidal sand bars dominantly develop were considered as the external force conditions required for calculation. The initial condition of the topographic data directly after the Maeupcheon tidal sand bar flushing during flooding was set as the initial topography. Consequently, the tidal sand bar formation and development due to nearshore currents dependent on the incident wave direction were reproduced. Approximately 66 h after the initial topography, a sand bar formation was observed at the Maengbang estuary.

• Journal of Nutrition and Health
• /
• v.55 no.2
• /
• pp.263-277
• /
• 2022

Purpose: The present study examined the associations of Korean Food-based Index of Dietary Inflammatory Potential (FBDI) scores with the prevalence of diabetes and hemoglobin A1c (HbA1c) level of diabetes patients in Korean adults. Methods: The Korean Genome and Epidemiology Study (KoGES) Health Examinee baseline data, collected between 2004 and 2013 and followed up between 2012 and 2016, were used in our study. A total 56,391 participants including diabetes (n = 5,733) and non-diabetes (n = 50,658) were analyzed. The subjects were classified into quartiles of FBDI scores using the semi-quantitative food-frequency questionnaire developed for KoGES. The prevalence rate of diabetes under FBDI scores was assessed by Cox proportional risk models and the severity of the diabetes was analyzed by multiple regression analysis. Results: There were 775 incident cases of diabetes after a mean follow-up of 3.97 years. There was no statistically significant association between FBDI scores and incidence of diabetes. Among diabetes patients at baseline, FBDI scores were related to the risk of progression of diabetes which was represented by greater than 9% HbA1c (Q1 vs. Q4; odds ratio, 1.562 [95% confidence intervals, 1.13-2.15]; p for trend = 0.007). The stratified analysis showed a stronger association in females, irregular exercise group, and higher body mass index group. Conclusion: These results suggest that a pro-inflammatory diet is not associated with the incidence of diabetes but is related to the HbA1c level of diabetes patients. Thus, further longitudinal studies with longer periods are required to determine a relationship between dietary inflammatory index and diabetes in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.311-319
• /
• 2006

A bed level change model(SED-FLUX) is introduced based on the realistic sediment transport process including bed load and suspended load behaviours at the bottom boundary layer. The model SED-FLUX includes wave module, hydrodynamic module and sediment transport and diffusion module that calculate suspended sediment concentration, net sediment erosion flux($Q_s$) and bed load flux. Bed load transport rate is evaluated by the van Rijn's TRANSPOR program which has been verified in wave-current fields. The net sediment erosion flux($Q_s$) at the bottom is evaluated as a source/sink term in the numerical sediment diffusion model where the suspended sediment concentration becomes a verification parameter of the $Q_s$. Bed level change module calculates a bed level change amount(${\Delta}h_{i,j}$) and updates a bed level. For the model verification the limit depth of the bed load transport is compared with the field experiment data and some formula on the threshold depth for the bed load movement by waves and currents. This model is applied to the beach profile changes by waves, then the model shows a clear erosion and accumulation profile according to the incident wave characteristics. Finally the beach evolution by waves and wave-induced currents behind the offshore breakwater is calculated, where the model shows a tombolo formation in the landward area of the breakwater.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.137-152
• /
• 2020

The increase in national income, the expansion of transportation network, the increase in leisure time, and the influx of foreign tourists in the era of internationalization, the influx of the outside population of Jeju region increased rapidly until 2020. However, the corona 19 (Covid-19) incident that began in January 2020 has hit the entire industry, and the tourism industry in Jeju has also been greatly damaged. However, in the second half of 2020, with some calming of the Corona 19 situation and difficult to leave overseas, the number of visitors to Jeju Island is increasing again as Koreans choose Jeju Island as their domestic tourism. This study analyzed the capacity of Jeju's external population based on the Contingent Valuation Method, and based on this, attempted to suggest policy recommendations for Jeju. The size of accommodations such as the density of visitors, toilets, and rest areas were excluded from consideration, and the level of securing the parking lot already exceeded the capacity, and the rate of securing the parking lot was 93.4%. In the case of accommodation, the total number of available rooms is 88,691, even if one guest per room is assumed, which is 32,372,215 per year, which is sufficient in terms of visitor capacity. To analyze the aspects of psychological capacity, this study analyzed whether the residents are feeling psychological discomfort through three methods of road congestion, garbage disposal, and sewage treatment through Contingent Valuation Method. However, the inconvenience caused by the increase of visitors and the effect of continuous population influx is working in combination, and it has the limitation that the effects of these independent factors cannot be specifically separated. As a result of the study, discomfort has already been recognized in terms of psychological capacity among the factors of capacity, and it was estimated that a cost of about 45 billion won per year was incurred as a result of deriving psychological costs through Contingent Valuation Method. In the future, a policy review is needed to resolve or maintain the perception of this discomfort through continuous management. Accordingly, it is necessary to recognize that the increase of visitors leads to the psychological discomfort of the residents, and to seek a policy alternative that can simultaneously increase the number of visitors and the comfort of the residence.

• Journal of Radiation Industry
• /
• v.18 no.3
• /
• pp.183-193
• /
• 2024

As part of the social response to the radon bed incident in 2018, the Nuclear Safety and Security Commission took measures to collect and dispose of all radon beds. The Waste Management Act provides landfill disposal as one of the disposal methods for natural radioactive product waste, which is one of the NORM wastes. When NORM wastes are landfilled, workers and the public at the landfill site are exposed to radiation through various pathways, such as leaching of radionuclides through soil and groundwater, and multiple exposure factors are involved simultaneously. In order to improve the reliability of radiological impact assessment, the values of main exposure factors should be selected more accurately. Therefore, before developing the main exposure factors for site characteristics, it is necessary to prioritize main exposure factors reflecting domestic characteristics of NORM waste landfills. Therefore, in this study, the main exposure factors for NORM waste landfill were derived using NDD analysis. To derive the main exposure factors, the analysis tool was first selected as RESRAD-ONSITE computer code, and the exposure scenarios were mainly selected as a resident farmer and suburban resident scenario, recreation scenario, and industrial worker scenario. Then, the priority 1 and 2 factors were selected for sensitivity analysis, and a Korean standard model was established to reflect Korean characteristics. Finally, the sensitivity analysis was conducted through NDD, and the main exposure factors were derived based on this. In the resident farmer scenario, the contaminated zone distribution coefficients of ²²⁶Ra, ²¹⁰Pb, ²³²Th, ²²⁸Ra, ²³⁴U, and ²³⁸U, as well as precipitation and evapotranspiration factors, were derived as the main exposure factors. In the suburban resident scenario, the contaminated zone distribution coefficients of ²²⁶Ra, ²¹⁰Pb, ²³²Th, ²²⁸Ra, ²³⁴U, and ²³⁸U, as well as precipitation and evapotranspiration coefficients, were derived as the main exposure factors. In the recreation scenario, the contaminated zone distribution coefficient of ²³²Th was derived as the main exposure factor. For the industrial worker scenario, the erosion rate was derived as the main exposure factor. The main exposure factors for each scenario were analyzed to be different depending on the scenario characteristics. The results of this study can be utilized as a basis for radiological environmental impact assessment of NORM waste landfill in Korea.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.3-12
• /
• 1994

$\^$137/Cs gamma ray induced thermoluminescenc(TL) from Na$\^$+/ ion implanted Al$_2$O$_3$ and unimplanted Al$_2$O$_3$ and the TL from Na$\^$+/ ion implanted Al$_2$O$_3$ are measured over the temperature range of 340K～620K. The TL curve of Na$\^$+/ ion implanted Al$_2$O$_3$ induced by $\^$137/Cs gamma ray is split into iolated TL peak located at 415K, 452K, 508K, and 568K. Because that the concentration of trapped char he carries of $\^$137/Cs gamma ray induced Al$_2$O$_3$ implanted with Na$\^$+/ ion is larger than that of Na$\^$+/ ion only implanted Al$_2$O$_3$, and the trap concentration of Na$\^$+/ ion implanted Al$_2$O$_3$ is much than that of $\^$137/Cs gamma ray only irradiated Al$_2$O$_3$, the TL intensity of Na$\^$+/ ion implanted Al$_2$O$_3$ induced by $\^$137/Cs gamma ray is about 20 times and 5 times higher than that of Al$_2$O$_3$ only implanted with Na$\^$+/ ion and Al$_2$O$_3$ only irradiated with $\^$137/Cs gamma ray, respectively. In proportion as ion implantation does and energy are incresed, the number of generated defects and the rate of defect creation are incresed, respectively. Therefore the TL intensity of ion implanted Al$_2$O$_3$ is depend on ion dose and energy. Acccrding to increse of incident ion mass, the TL intensity of ion implanted Al$_2$O$_3$ is abruptly decresce. This result showes that the TL intensity of ion implanted Al$_2$O$_3$ is closely related to ion depth range as wll as rate of defect creatin. The TL intensity of ion implanted Al$_2$O$_3$ is found to be related with defects generated by ion implantation. Table Caption

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.4
• /
• pp.1-15
• /
• 2016

Startups in Korea are experiencing for themselves the laws of survival through competition in the local and international market, and are performing active business movements based on these. Korea's economic growth rate is 2.6% due to the slump in the domestic demand and reduced exports brought by the MERSC incident in 2015. The Korea Development Institute has estimated the economic growth rate in 2016 to be around 3.0%. South Korea's economy is facing the crisis of low-growth solidification due to the decrease in economic growth, and it is forecasted that growth without employment and polarization will worsen. Startups in the high-tech industrial generation of a particular field wherein the market environment is rapidly changing must maintain a competitive advantage with the capabilities and functions exclusive to them. It is very important that they maintain a competitive edge by utilizing the capabilities exclusive to startup companies. Likewise, the accumulation of resources is also crucial in determining the success of a startup business. In a poor local startup ecosystem, majority of the startup companies are performing their business activities while striving for survival, rather than success. About 80% are struggling to survive and are failing to overcome the "Death Valley" faced 3-5 years after establishing the company. Since majority of the startups fail to achieve results during the initial stages of foundation, the importance of research on business activities and achievement during the early stages of establishment is being raised. In accordance to this, this research has performed an actual analysis on how the activities of startups during their preparation phase and early stages affect their achievements. A survey was done on the CEOs or executives (people in a position to make decisions) of local small and medium-sized enterprises that are considered start-ups, and 203 valid data were collected and analyzed. Results showed that the discoveries and utilized activities necessary for the businesses of startups have a significant impact on their achievement through the entrepreneur resources and external partners' cooperation; additionally, the related implications were discussed.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.27-33
• /
• 2012

This study aimed to investigate the responses of plant growth and blossom-end rot (BER) incidence to calcium (Ca) and its three kinds of antagonistic cations (K, Mg, and $NH_4$-N) with various ratios in nutrient solution for sweet paper (Capsicum annuum L. 'RZ208'). Both Ca to each cation and Ca to a series of cation combinations, such as potassium (K), ammonium nitrate ($NH_4$), or magnesium (Mg) were more influential to the fruit growth and quality than plant growth. Especially, the BER incidence was significantly influenced by the ratio treatments. For examples, when Ca:(K + Mg) or Ca:(K + Mg + $NH_4$) ratio was 1:2 the highest incident rate of BER about 70.3 or 86.3% was observed, lowering the marketable yield to 19 or 13.7% of the total yield, respectively. The correlation coefficiencies (= r) to relationships between the BER and K as well as BER and $NH_4$ were 0.82 (P < 0.05) and 0.65 (P < 0.05), respectively. Combination only with the Mg element was not correlated with the BER incidence. However, when both of the K and Mg concentrations were 0.65 (P < 0.05). The highest correlation coefficiency, 0.92 (P < 0.05), was found to a relationship between the BER and the tree elemental combination.