• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.799-806
• /
• 2002

In spite of the establishment of chemotherapy and the gradual decrease in prevalence, pulmonary tuberculosis is still mainly treated with an operation. Through analyzing and examining some cases of surgical treatment, we hope to provide some help in treating of pulmonary tuberculosis in the future. Material and Method: By comparing four journals previously published in our department with 144 cases of lung surgery during ten years from January of 1991 to December of 2000 performed by the department of thoracic and cardiovascular surgery of the National Medical Center, we analyzed and reviewed the most recent trends and the results of the surgical treatment. Annual frequency of the operation, distribution of age, examination of sputum, adaptability and types of techniques, complications, and results of the postoperative follow-up were used as methods. Result: It was found that the annual frequency of operations had decreased. The ratio of men to women, 2:1 indicates that there are more incidences in men. Aging of patients could be speculated by the .results that the decrease in the incidence rate in the 20s age range and increase rate in the 50s age range. The range of preoperative lesions belonged mostly to far advanced and moderately advanced tuberculosis. By monitoring the period of use in preoperative antituberculosis drugs, cases for more than 3 years remarkably increased from 16.0 % to 55.6 %. The positive reactive rate for preoperative sputum examinations were drastically decreased from 91 % to 27 %. Total pulmonary destruction and partial destruction were the most common cases in terms of adaptability to the operations and there were significant increases in forming empyema accompanied by parenchymal lesions from 4.0 % to 20.1 %. Pneumonectomy and pulmonary lobectomy were the major type of operations. Especially, there were increases in the incident rate of empyema and recurrence of tuberculosis resulted. Post operative follow-up indicates that the rate of complete recovery was more than 70 % and the rate of gradual increase in treating with persistent antituberculosis drug was from 5.8 % to 18.0 %. Conclusion: In recent cases, there is an increasing number of patients showing tolerance to chemotherapy. Patients with pleural tuberculosis and severe lesions were typically increased. It is important to accurately analyze those complaints accurately that are mostly difficult to be treated medically. Surgical treatment is strongly recommended Before multiple drug resistance occurs.

• Journal of the Korean Society of Radiology
• /
• v.7 no.1
• /
• pp.81-84
• /
• 2013

The use of the dosimetry have been increasingly recognized as high radiation energy and radiation treatment planning(RTP) have rapidly developed in radiotherapy. There are many types of detectors for the dosimetry such as ionization chamber, film, TLD, diode, and etc. Among such detectors, the diode detector uses a photoconductor materials that generate electrical signals by the incident radiation energy. Though many research groups are recently interested in such materials, there is few experimental results except for silicon in the radiation therapy field. In this study, the feasibility of photoconductor materials was verified as a dosimeter through the evaluation of response properties at a high radiation energy. For the fabricated detectors based on $HgI_2$ and $PbI_2$, reproducibility, linearity, and pulse-rate response were analyzed. Such evaluations are essential factors for the use of dosimeter. From results, linearity and reproducibility of the fabricated $HgI_2$ detector indicated about 7% error. The fabricated $PbI_2$ detector showed 1.7% error in linearity, and 12.2% error in reproducibility.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8455-8460
• /
• 2014

Background: The National Central Cancer Registry of China (NCCR) affiliated to the Bureau of Disease Control, National Health and Family Planning Commission of China is responsible for cancer surveillance in the entire country. Cancer registration data from each local registry located in each province are collected by NCCR annually to be analyzed and published to provide useful information for policy makers and cancer researchers. Materials and Methods: Until 1st June, 2013, 219 population-based cancer registries submitted data of 2010 to the National Central Cancer Registry of China covering about 207,229,403 population, and 145 cancer registries were selected after quality evaluation for this study. Colorectal cancer cases were selected from the database according to ICD-10 coded as "C18-C20". We calculated the crude incidence and mortality rates by sex, age groups and location (urban/rural). The China population in 2000 and Segi's population were used as standardized populations for the calculation of age-standardized rates. The 6th National Population Census data of China was used to combined with the cancer registries' data to estimate the colorectal cancer burden in China in 2010. Results: Colorectal cancer was the sixth most common cancer in China. It was estimated that there were 274,841 new cases diagnosed in 2010 (157,355 in males and 117,486 in females), with the crude incidence rate of 20.1/100,000, highest in males in urban areas. Age-standardized rates by China standard population of 2000 (ASRcn) and World standard population (Segi's population, ASRwld) for incidence were 16.1/100,000 and 15.9/100,000 respectively. There were 132,110 cases estimated to have died from colorectal cancer in China in 2010 (76,646 men and 55,464 women) with the crude mortality rate of 10.1/100,000. The ASRcn and ASRwld for mortality were 7.55/100,000 and 7.44/100,000 respectively, higher in males and urban areas than in females and rural areas. The incidence and mortality rates increased with age, reaching peaksin the 80-84 year old, and oldest age groups, respectively. Conclusions: Colorectal cancer is one of the most common incident cancers and cause of cancer death in China. Primary and secondary prevention, with attention to a health lifestyle, physical activity and screening should be enhanced in the general population.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.149-156
• /
• 2015

The Dynamic Positioning System consists of 7 elements which are namely Power system, Human machine interface, DP Computer, Position Reference System(PRS), Sensors, Thruster system and DP Operator. Incidents like loss of position(LOP) on DP vessel usually occur due to errors in these 7 elements. The purpose of this study is to find out safety operation method of DP vessel through qualitative and quantitative analyze of DP LOP incidents which are submitted to IMCA every year. The 612 DP LOP incidents submitted from 2001 to 2010 were analyzed to find out the main cause of the incidents and its rate among other causes. Consequently, the highest rate of incidents involving DP elements are PRS errors. DP computer, Power system, Human error and thruster system came next. The PRS has been analyzed and a flowchart was drawn through expert brainstorming. Also, the conditional probability has been analyzed through Bayesian Networks based on this flowchart. Consequentially, the main causes of drive off incidents were DGPS, microwave radar and HPR. Also, this study identified the main causes of DGPS errors through Bayesian Networks. These causes are signal blocked, electric components failure, relative mode error, signal weak or fail.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.55-61
• /
• 2015

When a radiation detector is applied to the measurement of the radioactivity of high-level of radioactive materials or the rapid response to the nuclear accident, several collimators with the different inner radii should be prepared according to the level of dose rate. This makes the in-situ measurement impractical, because of the heavy weight of the collimator. In this study, an IRIS collimator was developed so as to have a function of controlling the inner radius, with the same method used in optical camera, to vary the attenuation ratio of radiation. The shutter was made to have the double tungsten layers with different phase angles to prevent the radiation from penetrating owing to the mechanical tolerance. The performance evaluation through the MCNP code was conducted by calculating the attenuation ratio according to the inner radius of the collimator. The attenuation ratio was marked on the outer scale ring of the collimator. It is expected that when a radiation detector with the IRIS collimator is used for the in-situ measurement, it can change the attenuation ratio of the incident photon to the detector without replacing the collimator.

• Journal of Radiation Protection and Research
• /
• v.11 no.1
• /
• pp.3-14
• /
• 1986

A stud has been carried out for figuring out real photon spectrum from an observed gamma-ray spectrum by means of response matrix method, which is known one of the relatively convenient method for the estimation of exposure rate of a complex gamma ray field in comparison with graphical analysis and least square fitting of the measured spectrum. A 3'${\times}$3' cylindrical Nal(T1) scintillation detector in association with multichannel pulse height analyzer and six reference gamma ray sources covering the photon energy range of 0.05 to 2.0 MeV were used. In dividing the energy region for the construction of response matrix, two different approaches were attempted. One is dividing the entire energy region of interest into 20 bins, one of which corresponds to a width of 0.1 MeV to form $20{\times}20$ matrix, and another is dividing the 2 MeV region into 14 bins to form $14{\times}14$ matrix consists of $0.1(MeV)^{1/2}$ intervals assuming the resolution of the detector is dependent on square root of the incident photon energy. Inversion of thus constructed matrices was performed by a computor(P-E8/32) using the program attached to the end of this paper. The resultant exposure rates obtained by this method were in good agreement, within 10% with those calculated by ordinary formula widely used for a gamma-ray field of known energy and flux. It is concluded that the photen flux obtained by the response matrix constructed under the assumption of $E^{1/2}$ dependence is more realistic than that obtained by the matrix consist of identical energy bins in dosimetrical point of view.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.85-102
• /
• 2015

The purpose of this study was to present the direction of the safety manual in the food service industry kitchen. The accident rate in food industry kitchens is around 87.2%, it meaning nearly 9 workers have accident among 10, considered to be very high. The most common accident is a knife cut wound (84.7%). And burns caused by hot water and oil (74.4%), then shown slip and falls (28.1%). The degree of fulfillment of kitchen safety awareness and safe environment varied based on gender, in which male are considered more likely to suffer from accidents than women. The level of safety perception varies between workers at different career points. Workers with 1~3 years of experience suffer the highest rate of accident, while workers with 7~10 years and more of experience are believed to be at lower risk of accident. Restaurant type did not exhibit a significant influence on accidents cases, although differences in the adoption of personal safety, even partially, were discovered, at significance of 0.01 < 0.027 < $0.05^*$. Based on these results, this paper has suggested preventive safety management validation model the food service industry based on kitchen management and incident management, and presented steps necessary.

• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.147-154
• /
• 2014

Spinach downy mildew caused by Peronospora spinaciae is the main reason of yield reduction in Korea as well as in worldwide. After forced ventilation or horizontal air circulation fans were installed to control growth conditions in green house, the changes of temperature, relative humidity (RH), growth and yield, and occurrence of downy mildew were examined. Althought here was no significant difference of temperature between the treatments, RH as 9.2% lower at nighttime by forced ventilation. In addition, final fresh weight was increased to 17.8g compared to control (10.1g), which as 7.7g enhancement. Downy mildew s tarted to show 20 days after sowing (DAS) and increased to 34.7% at 60 DAS on harvest time in control. In contrast downy mildew was occurred 40 DAS with 0.7% incidence rate and 4% at harvest by forced ventilation. The results indicated that reduction of only 9.2% of RH at nighttime by forced ventilation in greenhouse spinach growth was dramatically thrived over 76.2%. Additionally spinach downy mildew occurred 20 days later with extremely lower incident rate, which meant 88.5% reduction of downy mildew.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.65-75
• /
• 2017

The Detection Model is the model to find the result of a certain purpose using artificial intelligent, data mining, intelligent algorithms In Cyber Security, it usually uses to detect intrusion, malwares, cyber incident, and attacks etc. There are an amount of unlabeled data that are collected in a real environment such as security data. Since the most of data are not defined the class labels, it is difficult to know type of data. Therefore, the label determination process is required to detect and analysis with accuracy. In this paper, we proposed a KDFL(K-means and D-S Fusion based Labeling) method using D-S inference and k-means(unsupervised) algorithms to decide label of data records by fusion, and a detection model architecture using a proposed labeling method. A proposed method has shown better performance on detection rate, accuracy, F1-measure index than other methods. In addition, since it has shown the improved results in error rate, we have verified good performance of our proposed method.