• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.38-47
• /
• 2017

This paper presents experimental data on water droplet breakup in high-speed air flows. Exact-time-dependent evolution of wave and droplet interaction as well as breakup processes were optically visualized using a shadowgraph technique. Droplet experiments were conducted in a shock tube. Five flow conditions were used with an incident shock wave Mach number from 1.40 to 2.19 with Weber number based on the droplet initial diameter from 2300 to 38000, respectively. This corresponds to post-shock flow speeds varying from subsonic to supersonic. The considered droplet diameters were 2.0 mm to 3.6 mm. Some interesting wave patterns in the near wake were found. The present data shows that with an increase in the Weber number the droplet acceleration coefficient decreases and the level of decrease was weaker for the case of higher Mach numbers. This state of affair is different to the existing data in literature. Possible reasons are discussed.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.15-22
• /
• 2018

7개의 방정식으로 구성된 DIM을 사용하여 압축성 다상 유동에 대해 연구하였다. 액체와 기체의 상세한 경계면 유동 구조를 얻기 위해 5 차의 MLP와 변형된 HLLC 근사 리만 해법을 포함하는 고차 수치기법이 구현되었다. 수치 방법의 유효성 검증을 위해 물과 공기로 구성된 다양한 1차원 충격관 문제를 해석하였고, 불연속면에 대해 뛰어난 해상도를 얻을 수 있었다. 마하수 1.22의 충격파 조건에서의 2차원 공기-헬륨 기포에 대한 충격파 상호 작용을 수치 해석하였고, 충격파 현상들을 잘 모사하였으며 실험결과와 비교 검증하였다.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1464-1471
• /
• 2003

In order to investigate the flows with shock wave in branch, 108$^{\circ}$ elbow and T-junction of the IRWST system of standard Korean nuclear reactor, detail time dependent behaviors of unsteady flow with shock wave, vortex and so on are obtained by numerical method using compressible three-dimensional Navier-Stokes equations. At first, the complex flow including the incident and reflected shock waves, vortex and expansion waves which are generated at the corner of T-junction is calculated by the commercial code of FLUENT6 and is compared with the experimental result to obtain the validation of numerical method. Then the flow fields in above mentioned units are analyzed by numerical method of [mite volume method. In numerical analysis, the distributions of flow properties with the moving of shock wave and the forces acting on the wall of each unit which can be used to calculate the size of supporting structure in future are calculated specially. It is found that the initial shock wave of normal type is re-established its type from an oblique one having the same strength of the initial shock wave at the 4 times hydraulic diameters of downstream from the branch point of each unit. Finally, it is turned out that the maximum force acting on the pipe wall becomes in order of the T-junction, 108$^{\circ}$ elbow and branch in magnitude, respectively.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.735-749
• /
• 2008

For the development of the original technique of structural safety assessment of Cargo Containment System(CCS) in membrane type LNG carriers, it is necessary to understand the characteristics of dynamic response behavior of CCS structure under sloshing impact pressure. In the previous study, the wet drop impact response analyses of CCS structure in membrane Mark III type LNG carriers were carried out by using Fluid-Structure Interaction(FSI) analysis technique of LS-DYNA code, and were also validated through a series of wet drop experiments for the enhancement of more accurate shock response analysis technique. In this study, the characteristics of structural shock response behaviors of CCS structure were sufficiently figured out by careful examinations of the effects of specimen weight, drop height, incident angle, corrugation and stiffness of inner hull on its shock response behaviors. The shock response analysis of upward shooting fluid to inner hull was performed, and the reason of faster strain response than shock pressure one was also figured out.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1595-1600
• /
• 2004

When a shock wave arrives at a duct, an impulsive wave is discharged from the duct exit and causes serious noise and vibration problems. In the current study, the characteristics of the impulsive wave discharged from a partial closed duct exit is numerically investigated using a CFD method. The Yee-Roe- Davis's total variation diminishing(TVD) scheme is used to solve the axisymmetric, unsteady, compressible Euler equations. With several partial closed duct exits, the Mach number of the incident shock wave $M_s$ and the distance L/D between the duct exit and a flat plate are varied in the range of $M_s$ = 1.01 ${\sim}$ 1.50 and L/D = 1.0 ${\sim}$ 4.0, respectively. The results obtained show that the magnitude of the impulsive wave impinging upon the flat plate strongly depends upon $M_s$, L/D and the partial closure of duct exit. The impulsive wave on the flat plate can be considerably alleviated by the partial closure of duct exit and, thus, the present method can be a passive control for the impulsive wave.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.318-324
• /
• 2010

발파나 지진과 같은 충격하중에 의한 재료의 동적특성이 최근 들어 지상 및 지하구조물의 설계에 주목받고 있다. 측정장비의 발달에 힘입어 수백 ${\mu}$-sec에서 파괴가 진행되는 동안에 발생하는 응력과 변형률의 완전한 이력곡선을 얻을 수 있다. SHPB는 암석의 동적거동을 연구하는데 보편적이며 믿을만한 실험장치로 인식되고 있으며, 이 장치에 의한 동적 압축이나 인장강도시험은 조만간 표준시험법으로 제정될 예정이다. 본 보고서는 종래의 사각형 입사파의 단점을 없애기 위하여 사인형태의 응력파를 생성할 수 있는 특별한 모양의 충격자를 고안한 논문을 소개한 것이다. 이 논문은 사인형태의 입사파에 대한 장점을 설명하고 또한 동하중에 대한 암석의 크기효과를 설명하고 있다.

• 천문학회보
• /
• 제43권2호
• /
• pp.42.1-42.1
• /
• 2018

Collisionless shocks with low sonic Mach numbers, M<4, are expected to accelerate cosmic ray (CR) protons via diffusive shock acceleration (DSA) in the intracluster medium (ICM). However, observational evidence for CR protons in the ICM has yet to be established. Performing particle-in-cell simulations, we study the injection of protons into DSA and the early development of a nonthermal particle population in weak shocks in high ${\beta}$ plasmas. Reflection of incident protons, self-excitation of plasma waves via CR-driven instabilities, and multiple cycles of shock drift acceleration are essential to the early acceleration of CR protons in supercritical quasi-parallel shocks. We find that only in ICM shocks with $M{\geq}2.3$, a sufficient fraction of incoming protons are reflected by the overshoot in the shock electric potential and magnetic mirror at locally perpendicular magnetic fields, leading to efficient excitation of magnetic waves via CR streaming instabilities and the injection into the DSA process. Since a significant fraction of ICM shocks have M < 2.3 CR proton acceleration in the ICM might be less efficient than previously expected. This may explain why the diffuse gamma-ray emission from galaxy clusters due to proton-proton collisions has not been detected so far.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.543-546
• /
• 1995

The reaction between CH3 radicals and H2 was investigated behind incident shock waves at temperatures between 1308 and 1825 K by following the consumption of CH3 using a time resolved UV absorption method at 213.9 nm. The rate coefficient expression 1.10 X 1013 exp(-7370 K/T) cm3mol-1s-1 for the reaction of CH3 with H2 was derived.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.207-212
• /
• 2020

To decide a separation distance of the redundant vital equipment in a naval ship, the damage radius due to an aerial explosion should be estimated. In this research, a simplified formula for the damage radius has been developed by using existing empirical formulae for reflected shock pressure and shock lethality value of equipment. As a numerical example, the damage radius for a typical pump aboard a naval ship has been calculated by the developed formula and compared with the results calculated by Measure of Total Integrated Ship Survivability (MOTISS) which is one of survivability analysis codes verified, validated and accredited by the US Navy. Also, comparison with the results calculated by existing other simplified formulae has been made.

• 대한화학회지
• /
• 제39권10호
• /
• pp.769-775
• /
• 1995

메틸 라디칼과 산소 분자 사이의 반응 속도를 입사 충격파를 이용하여 1390부터 2250k 온도범위 및 1.5에서 5.3mol/$m^3$ 밀도 범위에서 213.9nm 파장에서의 메틸 라디칼의 흡수 스펙트럼을 측정하여 고찰하였다. 메틸 라디칼을 생성하기 위한 원천 분자로는 azomethane이 사용되었다. 실험 결과 $CH_3 + O_2{\rightarrow}CH_2O + OH$ 반응의 속도상수는 $k_2=1.35{\times}10^{12}\;exp( - 5900 K/T)\;cm^3 mol^{-1}s^{-1}$ 같이 표현할 수 있었다.