• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1139-1147
• /
• 2000

This paper describes that the size of inactive zone can be directly applied to design multiblade fan/scroll system. From the experimental studies using a five hole pitot tube and smoke test, it is found that the size of inactive zone has linear relations with the mean velocity of impeller inlet and cut-off angle gives a great influences to the fan efficiency. For the practical design, a function related with geometric parameters(i.e. inner radius, cord length, cut-off clearance and cut-off angle) of fan/scroll system is suggested. By using these formulas, the size and distribution of inactive zone can be predicted without the measurements through the full domain, it can be possible to use them to know the efficiency improvement for new model designed.

• 한국방재학회 논문집
• /
• 제1권1호
• /
• pp.117-125
• /
• 2001

비활성 그리고 황성 단층지역의 내부와 주변에서 발생하는 응력장의 변화에 대한 수치적 분석이 수행되었다. 존재하는 비활성 단층지역 근처에서의 응력장은 단층의 방향과 단층화된 암반과 주위의 비단층화된 암반의 탄성적 특성 사이의 대조에 따라 변화한다. 활성 단층지역 주위의 응력장에 대한 분석에서, 만약 단층지역의 항복응력이 초과된다면, 단층지역 내에서의 국부화된 전단응력은 주위의 비단층화된 암반에서의 평균응력 보다 작게 되는 단층 내에서의 평균응력의 감소를 유발시킨다. 따라서 이러한 응력경사는 단층지역내로 유체의 흐름을 기대할 수 있다.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1341-1347
• /
• 2002

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and neural network. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. The distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure have qualitative similarity. The results of two-dimensional CFD were used for teaming as target values of neural network. The optimal angle and radius of cut-off were determined as 71$^{\circ}$and 0.092 times the outer diameter of impeller, respectively. It is quantified in the previous report that the optimal angle and radius of cut-off are approximately 72$^{\circ}$and 0.08 times the outer diameter of impeller, respectively.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.225-231
• /
• 2003

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

• 자원환경지질
• /
• 제47권1호
• /
• pp.17-27
• /
• 2014

ESR 연대를 이용하여, 울산광역시 울주군 삼남면 일대에 발달하는 양산단층대의 시간-공간적 활동 형태에 대해 연구하였다. 연구지역에서 일부 단층비지대는 기 형성된 단층비지 옆에 새로운 단층비지가 단층활동 형태 I에 의해 첨가되어 있다. 이럴 경우 각각의 단층비지에서 얻은 ESR 연대로부터 여러 번의 단층활동 시기를 해석하였다. 단층비 지대에서 일부분은 단층활동 형태 III에 의해 단층비지대 전체가 재 활동 하였다. 이와 같은 단층비지대는 이전의 활동 정보는 모두 지워지고 마지막 활동 시기만 기록되어 있다. 연구지역에서 양산단층대의 제4기 단층운동은 주기성을 가지며 활동기와 휴식기로 구분된다. ESR 연대 및 트렌치 조사 자료에 의하면, 연구지역에서 양산단층대의 단층활동은 이동하는 경향을 나타낸다. 약 75~85만 년 전을 기준으로 이전에는 서쪽분절로부터 북쪽분절까지, 약 75~85만년 전에는 동쪽분절로부터 북쪽분절까지 활동하였으며, 약 63~66만 년 전 및 48~54만 년 전에는 북쪽분절만 활동하였으며, 약 34만 년 전 이후에는 서쪽분절로부터 북쪽분절까지 다시 활동하였다.

• 동의생리병리학회지
• /
• 제19권2호
• /
• pp.511-514
• /
• 2005

The effects of chloroform extract from Riccardia marginata on antifungal activity were investigated. The crude chloroform extract of R. marginata inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (4 mm inhibition zone at $150\;{\mu}g/disc$) and the dermatophytic fungus Trichophyton mentagrophytes ATCC 28185, (6 mm inhibition zone at $150\;{\mu}g/disc$), and inactive to P388 murine leukaemia cells ATCC CCL 46 P388D1, ($IC_{50}\;>25,000\;{\mu}g/mL$ at $150\;{\mu}g/disc$). This crude chloroform extract of R. marginata showed strong antifungal activity against the dermatophytic fungus Trichophyton mentagrophytes.

• 한국패류학회지
• /
• 제22권2호
• /
• pp.143-150
• /
• 2006

The gonad index, condition index, reproductive cycle and spawning of the pen shell Atrina (Servatrina) pectinata were investigated using samples from the subtidal zone of Nokdo on the Boryeong coastal waters of Korea. Samples were collected monthly by SCUBA divers for one year from January to December, 2001. A. (Servatrina) pectinata is dioecious and oviparous. The spawning season of this species occurred once a year from June to August, with the main spawning occurring between June and July when the seawater temperature was around $20^{\circ}C$. Ripe oocytes were about 60-65 ${\mu}m$ in diameter. The reproductive cycle of this species could be classified into five successive stages; early active stage (November to March), late active stage (February to May), ripe stage (April to July), partially spawned stage (June to August), and spent/inactive stage (August to October). Monthly changes in the gonad index reached a maximum (4.6) in May (ripe stage), thereafter, the GI values gradually decreased from June to August when spawning occurred continuously. Therefore, monthly changes in the GI values showed a similar pattern to the gonadal phase. The condition index (CI) of the meat part without the posterior adductor muscle reached the maximum in June (ripe and partially spawned stage) and the minimum in September (spent/inactive stage), Accordingly, monthly changes in the condition indice of the meat part without the posterior adductor muscle coincided with the gonadal phases.

• 대한의생명과학회지
• /
• 제16권4호
• /
• pp.331-339
• /
• 2010

This study aims to evaluate the effect of Photodynamic Therapy (PDT) against methicillin-resistant Staphylococcus aureus with high-level mupirocin resistance (Hi-Mup MRSA). To examine the antimicrobial effect of photogem-mediated PDT against Hi-Mup MRSA, CFU quantifications, bacteria cell viability tests, and disk diffusion antimicrobial susceptibility tests were evaluated. In addition, one of PDT mechanisms was investigated by accumulating photogem ($10\;{\mu}g/ml$) in Hi-Mup MRSA. Photogem-mediated PDT properly inhibited the colony formation of Hi-Mup MRSA. Viable bacteria decreased greatly after a PDT application with photogem $10\;{\mu}g/ml$ at energy density $15\;J/cm^2$. The diameter of the inhibition zone around susceptible disks increased after PDT. In addition, we confirmed the accumulation of photogem in bacteria through fluorescent images. These results demonstrated that excellent photosensitization of Hi-Mup MRSA can be achieved using photogem with 630 nm LED irradiation. Thus, PDT may make survival Hi-Mup MRSA inactive.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.365-370
• /
• 2001

In order to minimize unstable flow occurred at a multiblade fan/scroll system, optimal angle and shape of cut-off was determined by using two-dimensional turbulent fluid field analyses and neural network. The results of CFD analyses were used for learning as data of input and output of neural network. After learning neural network optimization process was accomplished for design variables, the angle and the shape of cut-off, in the design domain. As a result of optimization, the optimal angle and shape were obtained as 71 and 0.092 times the outer diameter of impeller, respectively, which are very similar values to previous studies. Finally, it was verified that the fluid field is very stable for optimal angle and shape of cut-off by two-dimensional CFD analysis.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.209-210
• /
• 2006

The Bismarck Sea represent a unique region in the equatorial western Pacific where one can explore the relationship between tectonic and magmatic processes associated with back-arc opening. The sea, located north of Papua New Guinea and just south of the equator, formed during the final stages of a long, complex geological development of the Melanesian Borderland. The development resulted from the Cenozoic convergence between the Australian and Pacific- Caroline Plates and the opening of back-arc basins. At present, the Bismarck Sea straddles two oppositely facing trenches, the inactive Manus trench and the active New Britain trench, and covers two basins, the New Guinea Basin (NGB) to the west and the Manus Basin (MB) to the east. The two basins are separated by the shallow Willaumez-Manus Rise (WMR), which trends roughly from WNW to ESE. The origin of these major structural units and their relationship with the presentday zone of major seismicity along the Bismarck Sea Seismic Lineation (BSSL) remains unclear and is the main focus of our study.