• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1194-1202
• /
• 2011

A touch panel system has been one of the most widely used input devices. In this study, a touch panel embedded system using accelerometers is considered in order to make commercial white-boards or plates into touch panels. Three accelerometers are located at different positions on such a white board, so that touch points on the board can be identified using the sensors. For the identification of touch points, a TDOA (Time Difference of Arrivals) technique is applied in the algorithm which was implemented in a DSP board (TI 6713 DSK), which can provide a precise touch location by using the cross-correlation function of measured signals from the three accelerometers. Experiment results show that the touch panel system with accelerometers could provide the exact touch location. Thus a novel approach using such accelerometers could be applied to a new touch panel system.

• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1759-1766
• /
• 2016

We can implement the virtual touch recognition system by mounting the virtual touch algorithm into an embedded device connected to a depth camera. Since the computing performance is limited in embedded system, the real-time processing of recognizing the virtual touch is difficult when the resolution of the depth image is large. In order to resolve the problem, this paper improves the algorithms of binarization and labeling that occupy a lot of time in all processing of virtual touch recognition. It processes the binarization and labeling in only necessary regions rather than all of the picture. By appling the proposed algorithm, the system can recognize the virtual touch in real-time as about 31ms per a frame in the depth image that has 640×480 resolution.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.65-76
• /
• 2019

A multi-point touch input sensor having different sizes or different capacitance touch points connected by only one pair of signal transmission lines was fabricated using a polyimide film coated with a thin copper plate. The capacitance increases with the decrease in the number of sheets of fabric spacers placed between the two sheets of the polyimide film. Therefore, the touch input sensor could be manufactured without fabric spacers, which was possible by the action of the polyimide film as a dielectric material in the capacitor. On the multi-point touch sensor, higher capacitance was obtained when pressing wider-area touch points with 10mm to 25mm diameter on average. However, the capacitance of a system comprising two sheets of touch sensors was considerably low, causing a serious overlap of the capacitance values according to the data collected from the reliability test. Although the capacitance values could be increased by stacking several sheets of touch sensors, the overlap of data was still observed. After reducing the size of all touch points to 10mm and stacking up to eight sheets of sensors, reliable and consistent capacitance data was obtained. Five different capacitance signals could be induced in the sensors by pushing touch points simultaneously.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2010

Most of the research in the multi-touch area is based on the FTIR(Frustrated Total Internal Re리ection), which is just implemented by using the previous approach. Moreover, there are not the software solutions to improve a performance in the multi touch-blobs detection or the user gesture recognition. Therefore, we implement a multi-touch table-top display that is based on the DI(Diffused Illumination), the improved touch-points detection and user gesture recognition. The proposed method supports a simultaneous transformation multi-touch command for objects in the running application. Also, the system latency time is reduced by the proposed ore-testing method in the multi touch-blobs detection processing. Implemented device is simulated by programming the Flash AS3 application in the TUIO(Tangible User Interface Object) environment that is based on the OSC(Open Sound Control) protocol. As a result, Our system shows the 37% system latency reduction, and is successful in the multi-touch gestures recognition.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.35-42
• /
• 2016

Various events of stop, playback, capture, and zoom-in/out in playing video is available in the monitor of a small size such as smart phones. However, if the size of the display increases, then the cost of the touch recognition is increased, thus provision of a touch event is not possible in practice. In this paper, we propose a video event control system that recognizes a touch inexpensively from the depth information, then provides the variety of events of the toggle, the pinch-in / out by the single or multi-touch. The proposed method finds a touch location and the touch path by the depth information from a depth camera, and determines the touch gesture type. This touch interface algorithm is implemented in a small single-board system, and can control the video event by sending the gesture information through the UART communication. Simulation results show that the proposed depth touch method can control the various events in a large screen.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.319-320
• /
• 2006

In this paper, we propose a vision based system employing two cameras to provide effective touch screen function. The two main processes - determining touch (or no-touch) and contact location of screen plane - are essential for enabling touch screen function. First region of interest is found by using color characteristic and histogram for determining the contact mode. Second, if the hand touches the mirror, the fingertip point in image is found using the correlation coefficient based on the mirror attribute. Subsequently, the fingertip coordinate in image is transformed to the location in mirror plane by using four predefined points (termed as four-point method) and bilinear transform. Representative experimental results show that the proposed system is suited to touch screen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1933-1939
• /
• 2011

The former people who made musical instruments used touch devices for sound control. As the first multi-touch system appeared in 1982, the performance of the system has been improved rapidly by many researches. In spite of such performance improvement, the popularization of multi-touch interface was looked difficult. However, in 2007, multi-touch interfaces have become popular with Apple Iphone and people have been able to experience easily multi-touch interface using smart phones. In this paper we propose a general-purpose multi-touch interaction system for multi-touch content producer and market invigoration of multi-touch interface. We show by real field tests that the proposed method has benefits in the aspects of price and performance compared with other techniques.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2219-2222
• /
• 2009

A new touch-sensitive hydrogenated amorphous silicon(a-Si:H) display with embedded optical sensor arrays is presented. The touch-sensitive panel operation was successfully demonstrated on a prototype of 16-in. active-matrix liquid crystal display (AMLCD). The proposed system provides the finger touched point without the real-time image processing of information of the captured images. Due to the simple architecture of the system, we expect the introduction of large-area touch-sensitive display panels.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.25-29
• /
• 2010

In this paper, we implement a multi-touch system using FIDR. The implementation consists of hardware manufacture and development of image processing system. In the hardware system, touch screen, infrared LED placements and infrared camera are made. The image processing procedure is to extract each pointer's coordinates from image data and includes binary-coding, noise-elimination, labeling and calculation of mass center. From the implementation, we are able to make a multi-touch system with considerably lower cost than the existing ones.