• Journal of Environmental Science International
• /
• v.26 no.4
• /
• pp.467-481
• /
• 2017

This study sought to determine the changes in weather conditions in urban streets, along with conditions of traffic and roads in urban areas. The variations in weather conditions depending on traffic differed according to distance. First, the temperature difference measured by traffic results is as follows: T1 point $1.03^{\circ}C$, T2 point $1.04^{\circ}C$, T3 point $0.9^{\circ}C$, T4 point $1.01^{\circ}C$, and T5 point $0.31^{\circ}C$. The average difference between the measured temperatures by the point of measurement was $0.86^{\circ}C$. The changes in wind velocity according to traffic volume results of the measurements is T1 point 1.32 m/s, T2 point 0.80 m/s, T3 point 0.29 m/s, T4 point 0.04 m/s, and T5 point 0.09 m/s. The difference between the average wind speeds was 0.51 m/s and traffic jams caused substantial differences in distance. The relative humidity tended to be inversely proportional to temperature. The measurements results ares T1 point 2.29%, T2 point 2.67%, T3 point 2.47%, T4 point 2.16%, and T5 point 0.91% The difference between the average relative humidity was 7.3%. In case of independent sampling T test according to traffic volume, changes in wind velocity and temperature were directly proportional to the level of statistical significance(p<0.01). On the other hand, relative humidity tended to be inversely proportional; however, there was no statistical significance.

• Korean Journal of Poultry Science
• /
• v.27 no.3
• /
• pp.181-187
• /
• 2000

This work was designed to investigate the performances of broiler breeder hens upon the addition were vitamin and mineral supplements in feeds. Animals were divided into for feed groups such as control, T$_1$,T$_2$and T$_3$, and each treatment has four replications. All broiler breeder hens were housed individually, and were fed with identical iso-metaboilic energy and iso-protein, except for vitamins and minerals. Different sources and levels of vitamins and minerals were added to the basic feeds according to the treatments. At the end of the experiments, general laying rate(hen days), average egg weight, hatching egg laying rate(Hen day) every day. Hatching egg weight, sterility, embryo mortality, hatching rate and chick weight were examined. Although, early laying rate in all treatment groups were reduced during cold term management, general egg laying rate was increased only T$_3$group which was contanining vitamin C. However, similar results were obtained in the rates of general and hatching egg laying. General egg laying rate were somewhat higher of Control, T$_2$and T$_3$ groups than that of T$_1$group. In addition, the laying rates of general and hatching eggs slightly improved in the T$_3$group rather than those of Control group. Egg weight was reduced with the increasing of laying rate, showing the highest in the T$_3$group. The laying rate showed significantly lower value than those of any other groups. Egg weight was about 65g in T$_3$group. The results of hatching performance for production ability of Broiler breeder hens were fed experimental diet, although the rates of non-hatched and hatched eggs increased in order of Control, T$_1$T$_2$and T$_3$groups. However, the rate of embryo mortality was declined in order Control, T$_1$T$_2$and T$_3$groups.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.839-845
• /
• 2018

As a solution to the rural shortage of labor, mechanization crop production is necessary, but in some cases, the mechanization can cause problems such as a decrease in products due to the expansion of the necessary moderate workspace. The purpose of this study was to compare the yields of pepper by the planting-density for the mechanization of pepper cultivation. Experiments were done with three planting-density levels of $900{\times}300mm^2$(A-T), $1200{\times}450mm^2$(B-T), and $1500{\times}600mm^2$(C-T). In the analysis of growth, the highest values in plant height and thickness and the number of branches were observed with the B-T. C-T showed the highest values in the number of green-pepper and red-pepper and weight of the green-pepper and red-pepper, followed by B-T and A-T. In the analysis of growth, it was concluded that the proportion of the pepper body to the total length increased as the planting-density decreased. C-T had the biggest maximum diameter of the body, followed by B-T and A-T. On the other hand, A-T had the biggest minimum diameter of the body, followed by B-T and C-T. It was judged that the larger the planting-density was, the shorter the length was and the thicker the form was. As a result of measuring the chromaticity, there was no significant statistical difference in quality. Based on the experiment results, the ranking in total yields was in the order of C-T, B-T, and A-T. The reduced planting-density seemed to increase the productivity, while the labor intensity and time were reduced due to the improvement of the working environment.

• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.73-81
• /
• 2021

The current study investigated how Saccharomyces cerevisiae ameliorates the adverse effects of aflatoxin on in vitro rumen fermentation. In this study, five groups (T₁: Control [basal feed]; T₂: T₁ + 300 ppb aflatoxin B1 [AFB₁] and T₃, T₄, and T₅: T₂ with 0.05, 0.1, and 0.2% of S. cerevisiae, respectively) were prepared and incubated in vitro. The results revealed that truly degradable dry matter (TDDM), gas production (GP), microbial biomass production (MBP), truly degradable organic matter (TDOM), partitioning factor (PF), total volatile fatty acids (TVFA), acetate (A), propionate (P) and butyrate (B) values in the control group (T₁) were higher (p < 0.05) than those of the AFB₁ fed group (T₂). The A : P ratio in the control group (T₁) was reduced (p < 0.05) when compared to that of the T₂ group. The TDDM, TDOM, GP, TVFA, A, P, and B values of T₃, T₄, and T₅ improved with the increasing levels of S. cerevisiae; however, the values of group T₅ were lower (p < 0.05) than that of the control. The values of MBP, A : P ratio and PF in group T₅ were statistically similar to that of the control. It was concluded that the inclusion of S. cerevisiae (0.05 to 0.20%) to the AFB₁ (300 ppb) contaminated feed partially to completely ameliorated the adverse effects of AFB₁ on the in vitro rumen fermentation parameters.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.1
• /
• pp.52-60
• /
• 1995

This experiment was carried out to determine the effect of nitrogen application level of cattle sluny(T1:150, T3:250, T53.50 kglha) and chemical fertilizer(T2:150, T4:250, T6:350 kg/ha) on the growth characteristics, dry matter yield and chemical soil property of Sorghum-Sudangrass hybrid [Sorghum bicolor L. Moench]. The results obtained are summarized as follows: Mean stem diameter was significantly increased by increasing nitrogen application level of cattle slurry and chemical fertilizer. Especially, T6 treatment was the highest as 11.1 mm, while T1 treatment w a the lowest as 0.3 mrn. According to the same level of nitrogen application, cattle slurry treaunent(T1, T3 and T5) were showed a lower mean stem hardness than chemical fertilizer treatment(T2, T4 and T6). Especially, T3 treatment was the softest at 0.7 kg/$cm^2$. The dead stubble and tiller number were increased by increasing nitrogen level of cattle slurry and chemical fertilizer(P

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.672-677
• /
• 2007

Recently, the new finite element method which uses NURBS as shape functions was proposed. It is very promising because it can directly use CAD data to describe geometry and discretize problem domain. In this case, CAE models are not approximated but represent exact geometry. So, it can contribute to more accurate results. In addition, it can greatly reduce CAE costs in that simulation models don't have to be made up independently. But in spite of these advantages, the method using NURBS have also some disadvantages. NURBS surface cannot be refined locally. T-splines are recently developed surface modeling technique. A T-spline surface is a NURBS surface with T-junctions and is defined by a control grid called T-mesh. The T-junctions enable T-spline surfaces to be refined locally. That is, it is possible to add a single control point to a T-spline control grid without propagating an entire row or column of control points and without altering the surface. In this research, the finite element analysis using T-splines is studied. In this analysis, CAD data are used directly for engineering analysis. Some problems with complex geometry are solved. And the results will be compared with ones of conventional FEM.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.251-258
• /
• 2001

In Gram(+) bacteria and organelles in higher eukarotes, $Gln-tRNA^{Gln}$ utilized for protein biosynthesis is formed by a tRNA-dependent amino acid transformation using mischarged $Gln-tRNA^{Gln}$ as the intermediate. In this study, the gatCAB gene encoding $Gln-tRNA^{Gln}$ amidotransferase (Glu-AdT) of Staphylococcus aureus was cloned and its nucleotide sequence wa determined. The S. aureus gatCAB gene was organized in an operon structure consisting of three open reading frames (gatC, gatA, and gatB), similar to that of Bacillus subtilis. The gene sequences for the A and B subunits of$Gln-tRNA^{Gln}$ amidotransferase showed significant homology (77 and 87% homology with amino acid sequence) with the gatA and gatB genes of B. subtilis, yet the C subunit (gatC) showed a relatively lowe homology with the B. subtilis gatC gene and other orthologues. The cloned S. aureus <$Gln-tRNA^{Gln}$ amidotransferase gene was highly expressed in Escherichia coli, and the resulting crude enzyme could convert misacylated <$Gln-tRNA^{Gln}$ into $Gln-tRNA^{Gln}$ in vitro.

• Molecules and Cells
• /
• v.42 no.3
• /
• pp.228-236
• /
• 2019

CD4 T cells differentiate into $ROR{\gamma}t/IL$-17A-expressing cells in the small intestine following colonization by segmented filamentous bacteria (SFB). However, it remains unclear whether SFB-specific CD4 T cells can differentiate directly from naïve precursors, and whether their effector differentiation is solely directed towards the Th17 lineage. In this study, we used adoptive T cell transfer experiments and showed that naïve CD4 T cells can migrate to the small intestinal lamina propria (sLP) and differentiate into effector T cells that synthesize IL-17A in response to SFB colonization. Using single cell RT-PCR analysis, we showed that the progenies of SFB responding T cells are not uniform but composed of transcriptionally divergent populations including Th1, Th17 and follicular helper T cells. We further confirmed this finding using in vitro culture of SFB specific intestinal CD4 T cells in the presence of cognate antigens, which also generated heterogeneous population with similar features. Collectively, these findings indicate that a single species of intestinal bacteria can generate a divergent population of antigen-specific effector CD4 T cells, rather than it provides a cytokine milieu for the development of a particular effector T cell subset.

• Asian Journal of Innovation and Policy
• /
• v.10 no.3
• /
• pp.355-379
• /
• 2021

This study examined the evolution of S&T Basic Acts in Korea from the Science and Technology Promotion Act (1967) through the Special Act on STI (1997) to the Framework Act on Science and Technology (2001) in the following aspects: 1) comprehensive plans, 2) coordination mechanisms for S&T policies, 3) enforcement of R&D programs and performance diffusion, 4) promotion of human resources, 5) and S&T investment and budgeting. Before the Framework Act on S&T was enacted in 2001, critical issues were found in establishing S&T master plans, promotion of R&D programs, comprehensive coordination mechanisms, and R&D budgeting. The three Basic Acts have expanded the scope of regulation over time to cover the entire cycle of the S&T process. They concern a wide range of issues, including creating a basis for scientific and technological development, S&T promotion, disseminating and commercializing research outcomes, and preventing adverse effects from science and technology. The content of the Basic Acts has evolved in response to changes in the political, economic, and social environment of Korean industry during the past five decades.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.803-808
• /
• 2023

The IoT industry is growing at a record growth rate every year, but developers face practical problems such as security, data storage, and heterogeneity between devices before developing an IoT platform. In particular, heterogeneity between devices occurs due to network type and protocol, and device firmware must be changed or multiple IoT platforms must be used in some cases. In addition, data is wasted due to redundant sensing due to the overflow of indiscriminate IoT devices. In this paper, we propose a device-independent firmware design to solve the heterogeneity between devices in the IoT platform environment where Local WAS uses the MQTT protocol.