• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.128-132
• /
• 2004

Short wave infrared (SWIR) photovoltaic devices have been fabricated from metal organic vapour phase epitaxy (MOVPE) grown n- on p- HgCdTe films on GaAs substrates. The MOVPE grown films were processed into mesa type discrete devices with wet chemical etching employed for meas delineation and ZnS surface passivatlon. ZnS was thermally evaporated from effusion cell in an ultra high vacuum (UHV) chamber. The main features of the ZnS deposited from effusion cell in UHV chamber are low fixed surface charge density, and small hysteresis. It was found that a negative flat band voltage with -0.6 V has been obtained for Metal Insulator Semiconductor (MIS) capacitor which was evaporated at $910^{\circ}C$ for 90 min. Current-Voltage (I-V) and temperature dependence of the I-V characteristics were measured in the temperature range 80 - 300 K. The Zero bias dynamic resistance-area product ($R_{0}A$) was about $7500{\Omega}-cm^{2}$ at room temperature. The physical mechanisms that dominate dark current properties in the HgCdTe photodiodes are examined by the dependence of the $R_{0}A$ product upon reciprocal temperature. From theoretical considerations and known current expressions for thermal and tunnelling process, the device is shown to be diffusion limited up to 180 K and g-r limited at temperature below this.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.399-399
• /
• 2011

본 논문에서는 Indium tin oxide (ITO) 투명전극의 성장온도($T_G$)가 Cu(In,Ga)$Se_2$ (CIGS) 박막태양전지에 미치는 영향을 살펴 보았다. ITO 박막은 radio-frequency magnetron sputtering을 이용하여 상온에서 $350^{\circ}C$까지의 다양한 $T_G$ 조건에서 i-ZnO/ glass와 i-ZnO/CdS/CIGS/Mo/glass 기판에 증착되었다. ITO의 비저항과 CdS/CIGS 계면 특성은 $T_G$에 크게 영향을 받았다. $T_G{\leq}200^{\circ}C$에서는 $T_G$가 증가할수록 ITO 저항이 감소하였고 이에 따른 series 저항 감소가 태양전지 성능 향상에 기여하였다. 하지만 $T_G$ > $200^{\circ}C$에서는 CdS 버퍼층의 Cd이 CIGS 층으로 확산되어 소자의 p-n 계면이 파괴되는 것을 발견하였다. $T_G=200^{\circ}C$에서 ITO를 증착한 CIGS 태양전지의 경우 가장 높은 광전변환효율을 보였다.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.252-260
• /
• 2022

BACKGROUND: The number of biomass power plants is increasing around the world and the amount of wastes from power plants is expected to increase. But the bottom ash (BA) is not recycled and has been dumped in landfill. This study was conducted to find out functional groups of BA and adsorption rate of heavy metals on BA. METHODS AND RESULTS: The BA was dried in oven at 105℃ for 24 hours, and characterized by analyzing the chemistry, functional group, and surface area. The adsorption rates of heavy metals on BA were evaluated by different concentration, time, and pH. As a result, the adsorption amount of the heavy metals was high in the order of Zn> Cu> Cd> Ni and the removal rates of Zn, Cu, Cd, and Ni by BA was 49.75, 30.20, 32.46, and 36.10%, respectively. Also, the maximum adsorption capacity of BA was different by the heavy metal in the environmental conditions, and it was suggested that the isotherms for Zn, Ni, Cd, and Cu were adequate to Langmuir model. CONCLUSION(S): It is suggested that it would be effective to remove heavy metals in aqueous solution by using BA from biomass power plants in South Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.525-531
• /
• 1996

Nutritional status of minerals of beef and dairy cattle and buffalo in central Thailand were investigated by evaluating the mineral concentrations in feedstuff and blood plasma of animals. Three crossbred beef cow herds, a native cow herd, a buffalo female herd and 3 dairy cattle herds which consisted of the herds of lactating cows, dry cows and heifers were studied in both rainy and hot seasons. Low Na concentrations (<0.07% on a dry matter basis) in pasture samples from the fields for a cross bred beef cow were observed. Copper concentrations in all the pasture samples ranged from 3.7 to 13.5 mg/kg. Iron and Se concentration in pasture samples had a wide variety ranging from 185 to 1,345 and 0.033 to 1.127 mg/kg, respectively. The concentrations of K, Ca, Mg, P, Zn and Mn in total diets were higher than the requirements for beef and dairy cattle. Some animals with subnormal plasma Cu concentrations(< $0.65{\mu}g/ml$) existed in each herd. The animals which showed subnormal plasma Se concentrations(< $0.03{\mu}g/ml$) were observed in beef cow herds. The concentrations of Ca, Mg and Zn in plasma of animals were normal. Attention should be paid to the deficiencies in Na, Cu and Se of the animals in central Thailand.

• Journal of Nutrition and Health
• /
• v.40 no.2
• /
• pp.105-110
• /
• 2007

The study was designed to observe antioxidant activities of conjugated linoleic acid (CLA) by determining antioxidant enzyme protein levels [cytochrome P4502 El (CYP2E1), Copper, Zinc-superoxide dismutase (CuZn-SOD), glutathione peroxidase (CSH-Px), glutathione S-transferase (GST)] by Western blot analysis and the levels of ${\alpha}$-tocopherol and 2-thiobarbituric acid reactive substances (TBARS) in the liver of chronically ethanol-treated rats. Sixty Sprague Dawley male rats were divided into 3 groups (Control, EtOH, EtOH+CLA). All rats were fed Lieber-DeCarli liquid diet for 4 weeks by pair-feeding against the EtOH group. The liquid diet was supplemented with 1.77g CLA mixture per kg diet in the EtOH+CLA group. Isocaloric maltose dextrin was added in replace of 50g ethanol (36%kcal) for the Control group. Ethanol ingestion significantly increased the levels of CYP2E1 protein and TBARS, but significantly reduced CuZn-SOD protein level and increased GST protein level. There was no significant effect on the level of GSH-Px protein and ${\alpha}$-tocopherol in the liver by ethanol. CLA supplementation with ethanol significantly increased the levels of CuZn-SOD, GSH-Px and GST and also significantly attenuated TBARS level, whereas there was no significant effect on the levels of CYP2E1 protein and ${\alpha}$-tocopherol by CLA. Overall, the CLA supplemented to ethanol could significantly increase the levels of CuZn-SOD, GSH-Px and GST proteins and reduce the level of TBARS in the liver of chronically ethanol-treated rats.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.374-374
• /
• 2011

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 일반적으로 Soda lime glass/Mo/CIGS/CdS/ZnO/ITO/Al의 구조로 제작된다. 태양전지는 p형과 n형 반도체의 접합에 의해서 동작을 하게 되며, CIGS 박막 태양전지에서는 p형으로 CIGS 박막과 n형으로 CdS 박막이 사용된다. CIGS 박막태양전지에서는 p형과 n형이 서로 다른 물질로 이루어진 이종접합을 이루게 되고, 계면에서의 밴드가 어떻게 형성이 되느냐에 따라 태양전지 성능에 영향을 미치게 된다. p형의 CIGS 박막은 주로 다단계 증발법에 의해 형성되고 3단계 공정조건에 의해 계면의 특성에 많은 영향을 미치게 된다. n형의 CdS 박막은 주로 chemical bath deposition (CBD) 법에 의해 제작된다. 이렇게 제작되는 CBD-CdS는 시약의 농도, pH (수소이온농도), 박막 형성시의 온도 등의 조건에 따라 특성이 변하게 된다. 본 논문에서는 3단계 공정시간을 변화시켜 제작된 CIGS 박막 위에 CBD-CdS 증착 조건 중 thiourea 의 농도를 변화시켜 CIGS 태양전지를 제작하고 그에 따른 특성을 살펴보았다. CIGS 박막은 3단계 공정시간을 490초와 360초로 하여 제작하였고, CdS 박막은 thiourea 농도를 각각 0.025 M과 0.05 M, 0.074 M, 0.1 M로 변화시켜가며 제작하였다. 제작된 CIGS 박막 태양전지는 CIGS 3단계 공정시간과 thiourea의 조건에 따라 최고 15.81%, 최저 14.13%로 나타내었다. 또한, 외부양자효율을 측정하여 제작된 CIGS 박막 태양전지의 파장에 따른 특성을 비교하였다.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.97-97
• /
• 2010

We demonstrate the hybrid polymer-quantum dot based multi-functional device (Organic bistable devices, Light-emitting diode, and Photovoltaic cell) with a single active-layer structure consisting of CdSe/ZnS semiconductor quantum-dots (QDs) dispersed in a poly N-vinylcarbazole (PVK) and 1,3,5-tirs- (N-phenylbenzimidazol-2-yl) benzene (TPBi) fabricated on indium-tin-oxide (ITO)/glass substrate by using a simple spin coating technique. The multi-functionality of the device as Organic bistable device (OBD), Light Emitting Diode (LED), and Photovoltaic cell can be successfully achieved by adding an electron transport layer (ETL) TPBi to OBD for attaining the functions of LED and Photovoltaic cell in which the lowest unoccupied molecular orbital (LUMO) level of TPBi is positioned at the energy level between the conduction band of CdSe/ZnS and LiF/Al electrode (band-gap engineering). Through transmission electron microscopy (TEM) study, the active layer of the device has a p-i-n structure of a consolidated core-shell structure in which semiconductor QDs are uniformly and isotropically adsorbed on the surface of a p-type polymer core and the n-type small molecular organic materials surround the semiconductor QDs.

• Journal of Embryo Transfer
• /
• v.27 no.2
• /
• pp.101-105
• /
• 2012

Linuron is a pesticide with a weak anti-androgenic property, which impacts male reproductive organs. In this study, to clarify whether linuron affects the cellular antioxidant system of ventral prostate, gene expression patterns of the representative antioxidant enzymes such as glutathione peroxidase (GPx), selenoprotein P (SePP), and superoxide dismutase (SOD) were investigated in the rat ventral prostates exposed to linuron using real-time RT-PCR analyses. Sprague-Dawley rats castrated at 6 weeks old were treated with linuron (25, 50, or 100 mg/kg per oral) daily for 10 days after testosterone propionate administration (0.4 mg/kg) subcutaneously. As compared to normal control animals, mRNA levels of phospholipid hydroperoxide GPx (PHGPx), SePP, and Mn SOD significantly increased in the prostates exposed to linuron (25, 50, and 100 mg/kg). However, cytosolic GPx (100 mg/kg) and Cu/Zn SOD (25, 50, and 100 mg/kg) mRNA levels significantly decreased in the ventral prostates. These results indicate that linuron upregulates the expressions of PHGPx, SePP, and Mn SOD mRNAs, but down-regulates the expressions of cytosolic GPx and Cu/Zn SOD in rat prostates, suggesting that linuron may have dual effects in the cellular antioxidant system of prostate.