• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.203-204
• /
• 2005

PRAM (Phase change Random Access Memory) is one of the most promising candidates for next generation Non-volatile Memories. The Phase change material has been researched in the field of optical data storage media. Among the phase change materials $Ge_2Sb_2Te_5$(GST) is very well known for its high optical contrast in the state of amorphous and crystalline. However, the characteristics required in solid state memory are quite different from optical ones. In this study, the structural properties of GST thin films with composition were investigated for PRAM. The 100-nm thick GeTe and $Sb_2Te_3$ films were deposited on $SiO_2$/Si substrates by RF sputtering system. In order to characterize the crystal structure and morphology of these films, we performed x-ray diffraction (XRD) and atomic force microscopy (AFM).

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.137-141
• /
• 2014

In this study, we report the sintering behavior and properties of a $Ge_2Sb_2Te_5$ alloy powders for use as a sputtering target by spark plasma sintering. The effect of various sintering parameters, such as pressure, temperature and time, on the density and hardness of the target has been investigated in detail. Structural characterization was performed by scanning electron microscopy and X-ray diffraction. Hardness and thermal properties were measured by differential scanning calorimetry and micro-vickers hardness tester. The density and hardness of the sintered $Ge_2Sb_2Te_5$ materials were 5.8976~6.3687 $g/cm^3$ and 32~75 Hv, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1274-1276
• /
• 1997

We have investigated the crystallization properties of $Te_x(Sb_{85}Ge_{15})_{100-x}$ (x=0.3, 0.5, 1.0 at.%) thin films as observing the reflectance change, XRD and SEM. The reflectance difference(${\Delta}R$) between amorphous and crystalline phases appears appoximately 20%, in all films, at 780nm(diode laser wavelength). In the case of $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ thin film, especially, ${\Delta}R$ is about 30%. Also, amophous-to-crystalline phase change is observed at all films. Therefore, $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ thin film can be evaluated as attractive optical recording material with low loss and high contrast ratio.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.196-197
• /
• 2002

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.143-146
• /
• 1996

In (GeTe)$_{100-x}$(Sb$_2$Te$_3$)$_{x}$(x=33.5, 50, 66.5, 80 at.%) thin films, the optical properties of amorphous and crystalline thin film, XRD were studied. Also, the application for the phase change optical recording materials with the high stability and rapid erasing ability were studied. In the (GeTe)$_{100-x}$(Sb$_2$Te$_{3}$)$_{x}$ the transmittance was decreased with the increase of x. In all thin films, the transmittance was decreased and the reflectance was increased by annealing and particularly, the reflectance before and after annealing showed the large reflectance ratio. The XRD pattern, it was confined that these change of optical properties was due to the crystallization of amorphous thin films. The reflectance change was investigated using isothermal annealing condition.ion.ion.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.813-818
• /
• 1996

Amorphous As$_{10}$Ge$_{15}$ Te$_{75}$ device shows the memory switching characteristics under d.c. bias. In bulk material, a-As$_{10}$Ge$_{15}$ Te$_{75}$ switching threshold voltage (V$_{th}$) is very high (above 100 volts), but in the case of thin film, V$_{th}$ decreases to a few or ten a few volts. The characteristics of V$_{th}$ depends on the physical dimensions such as the thickness of thin film and the separation between d.c. electrodes, and the annealing conditions. The switching threshold voltage decreases exponentially with increasing annealing temperature and annealing time, but increases linearly with the thickness of thin film and exponentially with increasing the separation between d.c. electrodes. The desirable low switching threshold voltage, therefore, can be obtained by the stabilization through annealing and changing physical dimensions.imensions.sions.

• 대한전기학회논문지
• /
• 제44권7호
• /
• pp.901-907
• /
• 1995

The switching characteristics of As$_{10}$ Ge$_{15}$ Te$_{75}$ thin film were investigated under d.c. bias. And the frequency dependence of the conductivity was analysed with regard to the temperature dependence, in order to find the physical properties of the As$_{10}$ Ge$_{15}$ Te$_{75}$ thin film ; a characteristic relaxation time (.tau.$_{0}$ ), the spatial density of defect states (N), and the localized wavefunction (.alpha.$^{-1}$ ). It was formed that the threshold voltage depends on thickness, electrode distance, annealing time and temperature, respectively. The threshold voltage is increased as the thickness and the electrode distance is increased, while the threshold voltage is decreased in proportion to the increased annealing time and temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.181-182
• /
• 2011

Phase-change materials can be cycled by exposure to laser beam, and as a function of the pulse intensity and duration, the laser beam triggers the switching from crystalline to amorphous phase and back. In other to progress better crystallization transition and amorphization long phase-transformation data of phase-change memory (PRAM), we investigated about the effect of Sb doping and Ag ions percolating into Ge-Se-Te phase-change material. Doped Sb concentrations was determined each of 10, 20 and 30 wt%. As the Sb-doping concentration was increased, the resistivity decreased and the crystallization temperature increased. Ionization of Ag was progressed by DPSS laser (532 nm) for 1 hour. The resistivity was more decreased and the crystallization temperature was more increased in case of adding Ag layer under Sb-(Ge-Se-Te) thin film. At the every condition of thin films included Ag layer more stable states were indicated compare with just Sb-doped Ge-Se-Te thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.33-34
• /
• 2008

$Ge_1Se_1Te_2$ chalcogenide amorphous materials was prepared by the conventional melt-quenching method. Samples were prepared by e-beam evaporator system and thermal evaporator technique. The thermal properties were investigated in the temperature range 300K-400K and the electrical properties were studied in the voltage range from 0V to 3V below the corresponding glass trasition temperature. The obtained results agree with the electrothermal model for Phase-Change Random Access Memory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.106-107
• /
• 2007

A detailed investigation of cell structure and electrical characteristic in chalcogenide-based phase-change random access memory(PRAM) devices is presented. We used compound of Ge-Se-Te material for phase-change cell. Actually, the performance properties have been improved surprisingly then conventional Ge-Sb-Te. However, crystallization time was as long as ever for amorphization time. We conducted this experiment in order to solve that problem by doping-Sb with annealing.