• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.79-84
• /
• 1996

A $1\;{\mu}m$ thick n-type GaAs layer with Si doping density of $1{\times}10^{17}/cm^{3}$ and a $500{\AA}$ thick undoped single crystalline AlAs layer were subsequently grown by molecular beam epitaxy on the $n^{+}$ GaAs substrate. The AlAs/GaAs layer was oxidized in $N_{2}$ bubbled $H_{2}O$ vapor($95^{\circ}C$) ambient at $400^{\circ}C$ for 2 and 3 hours. From the result of XPS analysis, small amounts of $As_{2}O_{3}$, AlAs, and elemental As were found in the samples oxidized up to 2 hours. After 3 hours oxidation, however, various oxides related to As were dissolved and As atoms were diffused out toward the oxide surface. The as-grown AlAs/GaAs layer was selectively converted to $Al_{2}O_{3}/GaAs$ at the oxidation temperature $400^{\circ}C$ for 3 hours. The oxidation temperature and time is very critical to stop the oxidation at the AlAs/GaAs interface and to form a defect-free surface layer.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.208-212
• /
• 2009

The optical characterization of self-assembled InAs/AlAs quantum dots(QD) grown by MBE were investigated using photoreflectance spectroscopy. The intensities of the signals of the GaAs buffer and wetting layer(WL) changed with the width of the WL layer. The PR spectrum for the sample, in which QDs layer were etched off at room temperature, indicated that the broadened signal ranging $1.1{\sim}1.4\;eV$ was originated from InAs QDs and WL. The intensities of signals of GaAs buffer and the WL changed with the WL width. A red shift of the PR peak of WL are observed when the annealing temperatures range from $450^{\circ}C$ to $750^{\circ}C$, which indicates that the interdiffusion between dots and capping layer is caused by improvement in size uniformity of QDs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.414-414
• /
• 2013

InGaAlAs/InP은 $1.3{\sim}1.55{\mu}m$ 레이저 다이오드 응용을 위한 InGaAsP/InP를 대체하기 위한 물질로 많은 관심을 받아왔다. 디지털 합금 InGaAlAs 다중양자우물(multiple quantum wells: MQWs) 시료는 MBE (molecular beam epitaxy) 장비를 이용하여 n-InP 기판 위에 성장하였다. 양자우물과 장벽은 각각 (InGaAs)0.8(InAlAs)0.2와 (InGaAs)0.4(InAlAs)0.6 SPSs (short-period superlattices)로 $510^{\circ}C$에서 성장하였다. 발광특성을 향상시키기 위하여 질소분위기에서 $700^{\circ}C$ $750^{\circ}C$ 또는 $800^{\circ}C$에서 30초간 열처리(rapid thermal annealing: RTA)하였다. RTA 온도에 따른 디지털 합금 InGaAlAs MQWs의 발광특성을 분석하기 위해 PL (photoluminescence)과 TRPL(time-resolved PL)을 이용하였다. RTA 온도에 따른 InGaAlAs MQWs 시료의 발광 메카니즘 및 운반자 동력학을 연구하기 위하여 발광파장 및 온도에 따른 TRPL을 측정하였다. 저온(10 K)에서 PL 피크는 RTA 온도를 $700^{\circ}C$에서 $750^{\circ}C$로 증가하였을 때 1,242 nm에서 1,245 nm로 장파장 영역으로 이동하였다가 $800^{\circ}C$에서 열처리하였을 때 단파장 영역으로 이동하여 1,239 nm에서 나타났다. 또한 PL 세기는 RTA 온도를 증가함에 따라 증가함을 보이다가 RTA 온도를 $800^{\circ}C$로 증가하였을 때 PL 세기는 감소하였다. 발광소자 개발을 위한 InAlGaAs MQWs 시료의 최적의 열처리 조건을 이러한 PL과 TRPL 결과로부터 결정할 수 있다.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.424-432
• /
• 1993

AlGaAs/InGaAs/GaAs pseudomorphic structures have been grown by atmosheric pressure-MOCVD . The Al incorporation efficiency is constant but slightly exceeds the Ga incorporation during the growth of AlGaAs layers at $650^{\circ}C$ . Meanwhile , the In incorporation efficiency is constant but slightly less than the Ga incorporation in InGAAs layers. InGaAs/GaAs QWs were grown and their optical properties were characterized . $\delta$-doped Al0.24Ga0.76As/In0.16 Ga0.84As p-HEMT structures were successfully grown by MOCVD and their transport properties were characterized by Hall effect and SdH measurements. SdH Measurements at 3.7K show clear magnetoresistance oscillations and plateaus in the quantum Hall effect confirming the existence of a two-dimensional electron gas(2DEG) and a parallel conduction through the GaAs buffer layer. The fabricated $1.5\mu\textrm{m}$gatelength p-HEMTs having p-type GaAs in the buffer layer show a high transconductance of 200 mS/mm and a good pinch-off characteristics.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.270-279
• /
• 2002

We present a self-consistent numerical method for calculating the conduction-band profile and subband structure of AlGaN/GaN single heterojunctions. The subband calculations take into account the piezoelectric and spontaneous polarization effect and the Hartree and exchange-correlation interaction. We calculate the dependence of electron sheet concentration and subband energies on various structural parameters, such as the width and Al mole fraction of AlGaN, the density of donor impurities in AlGaN, and the density of acceptor impurities in GaN, as well as the electron temperature. The electron sheet concentration was sensitively dependent on the Al mole fraction and width of the AlGaN layer and the doping density of donor impurities in the AlGaN. The calculated results of electron sheet concentration as a function of the Al mole fraction are in excellent agreement with some experimental data available in the literature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.225-231
• /
• 2016

The valence band maximum (VBM) and conduction band minimum (CBM) of Al-doped GaInAsSb alloys substrated on GaSb are calculated by using an analytic approximation based on the tight binding method. The relative positions of the VBM and CBM between Al-GaInASSb and GaSb determine band alignement type, valence band offset (VBO) and conductin band offset (CBO) for the heterojunctions. In this study, aluminium doping is assumed to be substituted in the cation site and limited up to 20 % because it can easily oxidize and degrade materials. It is found that the Al-doped alloys exhibit type-II band alignments over the entire composition range and make the band gaps increase, whereas the VBO and CBO decrease. The decreasing rate of VBO is higher than that of CBO, which implies the Al components play a decisive role in controlling electrons at the interface. The Al-dopled GaInAsSb alloy has a direct band gap induced by $E({\Gamma})$ with a considerable distance from the E(L) and E(X), however, $E({\Gamma})$ approaches to E(L) and E(X) in the high Sb concentration (Sb > 0.7-0.8) which might affect the electron mobility and degrade the optical quality.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.116-121
• /
• 2000

We measured surface photovoltage (SPV) of $Al_{0.24}Ga_{0.76}As/GaAs$ epilayer grown by molecular beam epitixy (MBE). The band gap energies of $Al_{0.24}Ga_{0.76}As/GaAs$ epilayer, GaAs substrate and buffer layer obtained from SPV signals are 1.70, 1.40 and 1.42 eV, respectively. There results are in good agreements with photoreflectance (PR) measurement. The measured SPV intensity of GaAs substrate is three times larger than $Al_{0.24}Ga_{0.76}$Asepilayer by carrier mobility difference. The parameters of Varshni equation were determined from the SPV spectra as a function of temperature.

• Journal of the Korean Vacuum Society
• /
• v.1 no.3
• /
• pp.395-399
• /
• 1992

In0.5Al0.5As와 같은 조성을 갖는 합금인 n=1~4인 (InAs)n(AlAs)n 형태의 완벽한 층 상구조의 단주기 초격자를 MBE 방법으로 성장하였다. 저온 PL 측정을 통하여 광학적 특성 을 조사하였으며, Raman 산란실험을 통하여 구조적 특성을 조사하였다. X선화질 실험을 통하여 홀수 번호의 회적을 관측할 수 있었는데 이것은 초격자에 의한 새로운 주기의 형성 을 직접적으로 보여 주는 것이다.

• Electronics and Telecommunications Trends
• /
• v.15 no.6 s.66
• /
• pp.113-117
• /
• 2000

본 고에서는 MHEMT(Metamorphic InAlAs/InGaAs HEMT) 구조의 특성, MHEMT 소자특성, MHEMT MMIC 결과와 향후의 기술동향을 논의한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.194.2-194.2
• /
• 2015

본 논문에서는 InP 기판에 자발형성법 (Self-assembled Mode)으로 성장한 InAs/InAlGaAs 양자점(Quantum Dots)의 외부 열처리 온도에 따른 광학적 특성을 논의한다. 분자선증착기 (Molecular Beam Epitaxy, VH80MBE)로 5주기 적층구조를 갖는 InAs/InAlGaAs 양자점 시료 (기준시료)를 성장 후 온도 의존성 및 여기광세기 의존성 포토루미네슨스 (photoluminescence, PL) 분광법으로 기본특성을 평가하였다. 양자점 시료를 $500{\sim}800^{\circ}C$에서 열처리를 수행하고 광학적 특성을 열처리 전과 비교하여 분석하였다. $550^{\circ}C$에서 열처리한 InAs/InAlGaAs 양자점 시료의 저온 (11K) PL 파장은 1465 nm를 보였으며, 이는 열처리를 하지 않은 기준시료의 1452 nm 보다 13 nm 장파장으로 이동하였다. 열처리 온도가 $700^{\circ}C$ 이상인 경우, 양자점 PL 파장이 다시 단파장으로 이동하는 현상을 보였지만 여전히 열처리하지 않은 기준시료보다 장파장을 나타내었다. $700^{\circ}C$에서 열처리한 양자점 시료의 저온 PL 광세기는 기준시료보다 15.5배 더 크게 나타났으며, 주변 온도가 증가할수록 더디게 감소하는 것을 확인할 수 있었다. 온도의존성 PL로부터 구한 활성화에너지 (Activation Energy)는 $700^{\circ}C$ 열처리 온도의 경우 175.9 meV를 나타내었다. InAs/InAlGaAs 양자점 시료의 열처리 온도에 따른 광특성 변화를 InAs 양자점과 InAlGaAs 장벽층 계면에서 III족 원소인 In, Al 및 Ga의 상호확산과 결함이 완화되는 현상으로 해석할 수 있다.