• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.438-444
• /
• 1993

The circuit board of an electronic equipment were simulated with a vertical channel which had thermal blocks protruded from one of the channel walls. A rought front plate was made of a circuit board attached with short wires to simulate the back side of a printed circuit board. Natural convection experiments were carried out to study the effects of channel space and rough front plate and to find the suitable characteristic value after the fourth row. The effect of a rough front plate was negligble. There were negligible effects of the channel space on the first and second heaters. Heat transfer coefficients after the third row decreased as the channel space decreased. Heat transfer coefficients were almost constant for larger than 20 mm channel space. A characteristic length was suggested to non-dimensionalize Nu and Ra numbers in a vertical channel with protruded heaters. A correlation was obtained using the new characteristic lengths.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.72-76
• /
• 2005

This event recorder system, owing to the advancement of communication technology, is independently installed in most on-board electronics and given integrated management by on-board monitoring equipments. However, since the safety oriented equipments such as signalling devices, train protection systems, and train radios have been mounted on trains recently" the existing on-board monitoring device is no longer reliable enough for permanent preservation of data from train crashes or fires. This study has pointed out the problems mentioned above and described the designing concept of the fault recording system for high-speed trains for effective utilization of the train management program.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2004

Pest monitoring through field surveys and surveillance helps in forecasting the population build up of pest. It reduces the load of pesticides application and forms the basis of Integrated Pest Management in sericulture. Common sampling techniques for quantifying pest populations and damage caused by them are reviewed emphasizing the need for quick and simple sampling methods. Various direct and indirect sampling methods for establishing pest populations are discussed and methods have been discussed to use indirect sampling method under IPM programme in sericulture. The use of pheromone lures and traps forms one of the important ingredients of integrated pest management, which calls for integration of all available methods in a cost effective and environmental friendly manner offering consistent efficacy. Silk-worms feed on the variety of silk host plants and spin cocoons. Each silk host plant is attacked in the field by number of insect pest species. Several pests are common to mulberry, tasar, oak tasar, muga and eri host plant but pest status and seasonal abundance differs from each crop. The key pests are serious perennially occurring persistent species which cause considerable yield loss every year on large areas and require control measure. Regular occurrence of minor pest is noticed but sudden increase in its population is not known. The occasional pests are sporadic but potential causing sufficient damage. Silk losses due to attack of all the pests have not been calculated. However, information on pest biology and ecology, and control practices being practiced is available but the period of outbreak of major pests and predators on silkworms and its host plant needs to be reinvestigated. Pest and predators forecasting based on surveillance information may provide an opportunity to minimize the losses, particularly to reduce expenditure involved in pest management.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.83-93
• /
• 2000

This study was carried out to improve the physico-mechanical properties of board products by applying the technique of high frequency heating, and find out the optimum conditions of high frequency heating, compared with the technique of hot platen heating. The possibility of isocyanate resin application to board production was also considered to solve the problem of free formaldehyde emission from urea resin which is generally used in wood industry. For this study, 30 mm thick MDP (medium density fiberboard) with isocyanate resin were manufactured by the techniques of hot platen heating, high frequency heating and the combination techniques of both heating methods, and compared in several point of views.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.285-292
• /
• 2016

By adding short-range wireless communication function such as Bluetooth and Wi-Fi to the last vehicle in conjunction with a smart phone, a modern automobile is becoming entertainment screen to determine a variety of information such as car location information, diagnosis information, etc. through the ECU vehicle electronic control unit. In this study, by utilizing short-range communications capability of the on-board diagnostic devices and smart phones in association with the on-board diagnostics, compatibility tests among a number of smart phone models, Bluetooth and NFC(Near Field Communication) were carried out and those results were analyzed. Furthermore, composition of on-board diagnostic device having Bluetooth and NFC interface function and the fault diagnosis function were implemented, and fault diagnosis debugging program was developed. In addition, fault diagnosis data of the vehicle via the OBD-II interface was extracted. Finally, the on-board diagnostics CAN Protocol implementation has been proposed, and the results of work was analyzed.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.342-348
• /
• 2001

This study was conducted to obtain granular crystalline gypsum that can be used as raw material for plaster boards or cements from waste Plaster board. We could disintegrate preferentially gypsum to gypsum needle in 10${\mu}{\textrm}{m}$ or less size among the contents of waste plaster board (gypsum, paper, fiber, and inorganic material .etc.) by hydration afterwards the dehydration of crushed waste plaster board. In this case, the optimum conditions for minimizing the size of gypsum were dehydration rate of 75%~ 85%, hydration concentration of 10~20%, agitation speed of 250~400rpm, crushing size of 2cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield from under screenings of 325mesh wet screening which followed by the dehydration-hydration process performed in the conditions of dehydration rate of 80%, hydration concentration of 15%, agitation speed of 300rpm, crushing size of 2cm or less. Subsequently, Plate-like Crystalline gypsum of is 151${\mu}{\textrm}{m}$ size and the grade of 99.49% with the Yield of 98.0% from the upper screenings of 270mesh wet screening carried out after the re-crystallization of the recovered gypsum needle slurry.

• Journal of Arbitration Studies
• /
• v.13 no.2
• /
• pp.69-102
• /
• 2004

This paper discusses about the e-commerce and the various types of e-commerce disputes. Through empirical examination on the dispute consideration system and by comparative analysis it is derived out of the weakness of current system and finally some suggestions for improvement. First, it is recommended that the more sophisticated knowledge concerning e-commerce should be proliferated through the existing institutions. For example, disputes for B2C could be managed by the consideration system of consumer dispute consideration in Consumer Protection Board of Korea, while B2B by the arbitration system of the Korean Commercial Arbitration Board. Second, the role of Korea Institute for Electronic Commerce established for the purpose of consideration of e-commerce disputes is much emphasized. For successful achievement, it is necessarily required to reinforce the related laws, systems, institutions and human resources. Finally, it is also suggested that the Korean Commercial Arbitration Board and Consumer Protection Board of Korea fully cover consideration and arbitration, while Korea Institute for Electronic Commerce activates its proper role of consulting and ad hoc arbitration by using electronic information. This study results are how to minimize the disputes and the method of dispute settlement. Therefore, a role of arbitration proposed and emphasized. To protect the dispute in advance, it's suggested to revise rules timely following on technical changes, and emphasized that the dispute has to lead to arbitration settlement not for consuming unnecessary time and finance for enterprises and consumers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.43-47
• /
• 2010

The use of high-strength concrete has increased for its excellent structural stability as buildings become higher and bigger than ever before in Korea and overseas recently. The functional requirement of building materials has also been bolstered so for the high -performance, high-quality construction materials to be used more extensively. However, the internal structure of the high-strength concrete is very dense so spalling can be caused during fire. The spalling in turn can cause critical structural damages followed by the fatal consequences, demolition of the building. Therefore, ensuring fire safety for high-rise buildings is assumed to be urgent. Alumino-silicate fire resistant board producing technology has been developed in situations that new materials with excellent fire resistance and easy installation has been sought. The alumino-silicate fire resistant board turned out to exhibit not only fire resistance and excellent physical and dynamical characteristics but also excellent onsite applicability and easy process and transportation after completing Mock-up test. Its excellence as a high-performance building materials was proven.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.933-941
• /
• 2021

This research aims to test the effect of corporate governance factors on corporate social responsibility (CSR) disclosure and its impact on a company's financial performance. The factors of corporate governance referred to in this research are foreign ownership, state ownership, number of board of commissioners, the proportion of independent commissioners, and educational background of commissioners' board. Based on the purposive sampling method, 194 companies were selected with a total of 582 observations. The data analysis used in this study was the Structural Equation Model (SEM) approach by using the alternative Partial Least Square (PLS) method. The results of this research indicated that state ownership, number of board of commissioners, and the proportion of independent commissioners had a significant positive effect on CSR disclosure. While the foreign ownership and the educational background of the commissioners' board have had an insignificant effect on CSR disclosure. Then, CSR disclosure had a significant positive effect on the companies' financial performance. The findings of this study suggest that the positive effect of the CSR disclosure on performance is because the disclosure is able to improve the company's reputation; the more social activities are carried out will improve the customers' loyalty as well as the support from other stakeholders which in turns will improve the company's performance.