• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.380-383
• /
• 2014

허브(hub) BLDC(Brushless Direct Current) 전동기란 아우터로터 타입 고효율 전동기로 다극의 영구자석으로 이루어진 회전자가 바퀴의 구동축이 되는 직접구동용 모터를 말하며, 휠인 모터로도 불린다. 본 연구에서는 BLDC 허브 모터 구동을 위한 벡터제어 기법 속도 제어기를 dsPIC30f2010 16비트 마이크로 컨트롤러를 이용하여 설계한다. 특히 복잡한 연산 시간을 줄이는 벡터 제어 방법을 제안하고, MOSFET 인버터 구동기를 직접 설계하여 경제성을 높인다.

• 천문학회보
• /
• 제39권1호
• /
• pp.51.2-51.2
• /
• 2014

CQUEAN(Camera for QUasars in EArly uNiverse) has been used at the 2.1 m Otto Struve Telescope of the McDonald Observatory since 2010. This camera is optimized at 0.7 - 1.1 um for the survey of Lyman break of high redshift (z > 5) quasars in the early universe. The current system has a filter wheel consist of seven (g', r', I', z', Y, Iz and Is) broad-band filters. We are upgrading this filter wheel to have 20 narrow band filters, with which we can take spectral energy distributions of targets. The new filter wheel consists of interchangeable cartridges for 50 mm square filters, a speed reducer unit, and a step motor. This new design of the large size filter wheel can be applied to other large format CCD cameras.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.69-76
• /
• 2004

This paper evaluates the effectiveness of four-wheel-steering system from the viewpoint of lane-keeping control theory. In this paper, the lane-keeping control system is designed on the basis of the four-wheel-steering automobiles whose desired steering response is realized with the application of model matching control. Two types of desired steering responses are presented in this paper. One is zero-sideslip response, the other one is steering response which realizes zero-phase-delay of lateral acceleration. Using simplified linear two degree-of-freedom bicycle model, simulation study and theoretical analysis are conducted to evaluate the lane-keeping control performance of active four-wheel-steering automobiles which have different desired steering responses. Finally, the evaluation is conducted on straight and curved roadway tracking maneuvers.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1634-1640
• /
• 2017

The purpose of this study is based on the electromagnet robot with a four-wheel drive which can climb up and down on structures of iron wall instead of human workers. Many of studies strive to develop wall riding-robots in terms of absorption system. However, the system needs additional devices too much to work out as well as electromagnetic wheel system also has much expense to make it. In this regard, this study makes efforts to find the way how to keep steady distance between wheel and wall while using general electromagnet to reduce motor load and to move robot so easily.

• 전자공학회논문지
• /
• 제54권7호
• /
• pp.127-132
• /
• 2017

이 논문에서는 모델 기반 설계에 근거한 이륜 도립진자 로봇의 제어이득을 설계하고 NXT 마인드스톰과 RobotC 언어를 이용하여 수업에 활용 가능한 로봇을 제작 및 실험한다. 이륜 도립진자 로봇은 NXT 마인드스톰, 서보 직류전동기, 자이로 센서, 가속도 센서로 구성된다. 직류전동기에 내장된 엔코더를 이용하여 바퀴의 회전각을 검출하며 이동평균을 이용하여 바퀴의 회전각속도를 계산한다. 자이로 센서는 몸체의 피치 각속도를 측정하며 가속도 센서는 몸체의 피치 각도를 측정한다. 자이로와 가속도의 센서 융합을 통해 몸체 각도를 계산한다. 제어기 이득 요소는 휠 각도, 휠 각속도, 몸체 피치 각도, 몸체 피치 각속도에 대한 가중치이다. 이들 제어이득의 변화에 따른 도립진자 로봇의 변화를 실험하며 유용성을 확인한다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.27-36
• /
• 2020

The aim of this study is to design a simulation model for an electric All-Wheel-Drive (AWD) tractor to evaluate the performance of the selected component and agricultural work ability. The electric AWD tractor consists of four motors independently for each drive wheel, and each motor is combined with an engine generator, a battery pack, and reducers. The torque data of a 78 kW-class tractor was measured during plow tillage and driving operation to develop a workload cycle. A simulation model was developed by using commercial software, Simulation X, and it used the workload as the simulation condition. As a result of simulation analysis, the drive system, including an electric motor and reducers, was able to cope with high load during plow tillage. The SOC (State of Charge) level was influenced by the output power of the motor, and it was maintained in the range of 50~80%. The fuel consumed by the engine was about 18.23 L during working on a total of 8 fields. The electric AWD tractor was able to perform agricultural work for about 7 hours. In the future study, the electric AWD tractor will be developed reflecting the simulation condition. Research on the comparison between the simulation model and the electric AWD tractor should be performed.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.313-320
• /
• 2011

Multi-axle driving vehicles that are used in special environments require high driving performance, steering performance, and stability. Among these vehicles, 6WS/6WD vehicles with middle wheels have structural safety by distributing the load and reducing the pitch angle during rapid acceleration and braking. 6WS/6WD vehicles are favored for military use in off road operations because of their high maneuverability and mobility on extreme terrains and obstacles. 6WD vehicles that using in-wheel motor can generate the independent wheel torque without other mechanical parts. Conventional vehicles, however, cannot generate an opposite driving force at each side wheel. Using an independent steering and driving system, six-wheel vehicles can show better performance than conventional vehicles. Using of independent steering and driving system, the 6 wheel vehicle can improve a performance better than conventional vehicle. This vehicle enhances the maneuverability under low speed and the stability at high speed. This paper describes an independent 6WS/6WD vehicle, consists of three parts; Vehicle Model, Control Algorithm for 6WS/6WD and Simulation. First, vehicle model is application of TruckSim software for 6WS and 6WD. Second, control algorithm describes the optimum tire force distribution method in view of energy saving. Last is simulation and verification.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.99-111
• /
• 2016

This paper presents an integrated fault diagnosis algorithm for driving motor of In-wheel independent drive electric vehicle. Especially, this paper proposes a method that integrated the high level fault diagnosis and the low level fault diagnosis in order to improve a robustness and performance of the fault diagnosis system. The high level fault diagnosis is performed using the vehicle dynamics analysis and the low level fault diagnosis is carried using the motor system analysis. The validity of the high level fault diagnosis algorithms was verified through $Carsim^{(R)}$ and MATLAB/$Simulink^{(R)}$ cosimulation and the low level fault diagnosis's validity was shown by applying it to a MATLAB/$Simulink^{(R)}$ interior permanent magnet synchronous motor control system. Finally, this paper presents a fault diagnosis strategy by combining the high level fault diagnosis and the low level fault diagnosis.

• 한국가스학회지
• /
• 제26권2호
• /
• pp.21-26
• /
• 2022

사륜구동은 구동력을 4바퀴에 모두 전달하기 때문에 노면과의 접지력이 상승하여 구동력이 상승한다. 하지만 그로 인해 연비가 저하되는 단점을 가지고 있다. 따라서 평소에 이륜구동으로 주행하다가 필요에 의해 선택적 사륜구동으로 변환하는 방법으로 사륜구동을 많이 사용한다. 이러한 선택적 사륜구동은 운전자가 보내는 전기적 신호를 Transfer case에서 기계적으로 바꿔서 구동력을 변환시킨다. 본 연구에서는 전기적 신호를 기계적으로 바꿔주기 위해 모터에 감속기를 적용하여 토크를 증대시켜 기능을 수행하였다. 따라서, 본 연구에서는 구동을 변환시켜주기 위해 적용되는 Transfer case내부에 있는 모터에 적용할 수 있는 감속메커니즘을 도출하고 그에 따른 유성기어형태를 적용한 감속비를 최적화하였다. 그리고 도출된 감속비를 토대로 링기어를 공통으로 사용하는 유성기어 2세트를 적용하여 입력축과 출력축이 동일상에서 감속이 진행되는 유성기어 기어치형의 개발 및 Transfer csae 내에 있는 구동변환장치 구동부의 최적화 설계를 진행하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.90-96
• /
• 2003

This paper deals with the design and the characteristic analysis of a coreless axial flux permanent magnet (AFPM) motor. Because a direct-drive wheel motor is easily derived from it, the AFPM motor is very suitable for application in an electric scooter. Compared to a conventional motor of the same size and weight, the AFPM motor is proven to have more power and torque per unit weight. In this paper, an AFPM coreless motor with a double-sided rotor disk equipped with Nd-Fe-B rare earth magnets is designed and a prototype of the motor is manufactured, which will be properly applied for the low-speed, and high-torque direct drive required for the electric scooter. The manufactured prototype of the motor has a rating of 300W, 510rpm, 5.6Nm, and 85% efficiency.