• 지질공학
• /
• 제11권1호
• /
• pp.25-35
• /
• 2001

충청남도 홍성지역의 부지응답특성 평가를 위한 연구를 수행하기 위하여 다운홀 및 SASW 기법 등의 현장시험과 공진주/비틂전단시험 등 실내시험을 수행하였다. 이를 바탕으로 홍성지역의 부지특성을 평가하고 지반응답해석을 실시하였다. 홍성지역 현장은 지반은, 상부토층 30m의 평균전단파 속도가 209m/s로 SD 지반으로 결정되었고 응답해석결과 국내 기준과 잘 일치되는 부분도 있었으나, 구조물 주기에 따른 응답스펙트롬의 특정 주기에서 국내 기준보다 크게 증폭되는 현상도 발견되었다.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.202-213
• /
• 2014

The sea cucumber, Apostichopus japonicus, is becoming an important aquaculture species in China, Japan and Korea. The purpose of this study is to evaluate the biological performance of a tubular type of subsurface cage for sea cucumber grow-out by in-situ tests. The cage structure was constructed of PP (polypropylene) frames and PP tubes (${\phi}130mm{\times}24pieces$). A set of tests were conducted at a depth of 15 m near Seosaeng, Ulsan, Korea for 295 days (23 July, 2012 to 13 May, 2013). A total of 155 sea cucumbers were used and fed a mixed diet containing mud, mineral, wheat, fish meal, etc (3% of their body weight). At the end of the experiments, sea cucumber showed a higher survival rate in feed shelter (77.14%) rather than no feed shelter (64.71%). The specific growth rate (SGR) of sea cucumbers in feed condition (0.04% $day^{-1}$) was higher than that of no feed culture animals (-0.49% $day^{-1}$) during total experimental periods. The result was able to find a no significance difference in survival rate but a significance difference in SGR under feed and no feed treatments.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.45-56
• /
• 1998

대상 연약지반의 적절한 개량기술 선택과 개량 효과들을 평가, 관리하기 위해서는 현장 연약 점토지반 특성을 정확히 평가할 수 있는 적절한 현장 시험기법의 적용이 필수적이다. 본 논문에서는 여러 현장시험 방법 중에 경제적이면서도 효과적인 것으로 알려져 국내에서 그 수요가 증가하고 있는 피에조 콘(piezocone)과 딜라토메터(dilatometer)를 이용하여 연약지반의 현장 물성을 평가하고 비교하였다. 연구결과 두 장비 모두 유사한 흙 분류 결과를 제공하였으나. 특히 간극수압으로부터 도출한 흙 분류 결과가 연약점토층 사이에 실트나 모래층 들이 산재한 우리나라 실정에 보다 적절하며 일관성 있는 결과를 주는 것으로 평가되었다. 점토층의 비배수 전단강도는 피에조 콘의 경우 간극수압과 선단저항력으로부터 도출된 간들이 유사하였고 딜라토메터로부터 추정된 비배수 전단강도는 피에조 콘의 두 관측 값으로 유추된 결과들의 평균간에 근접한 것으로 평가되었다. 그리고 실트 또는 모래층이 산재하는 경우 연약지반의 압밀특성을 평가하기 위해서는 관입과정에서 유발되는 소산효과를 고려한 이론적 시간계수가 보다 적절한 것으로 평가된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.54-56
• /
• 2006

Single-well-gas-sparging tests were developed and evaluated for assessing the feasibility of in-situ aerobic cometabolism of trichloroethylene (TCE), using propane as a growth substrate. To evaluate transport characteristics of dissolved solutes [sulfur hexafluoride (SF6) or bromide (non-reactive tracers), propane (a growth substrate), ethylene, propylene (nontoxic surrogates to probe for CAH transformation activity), and DO], push-pull transport tests were performed. Mass balance showed about 90% of the injected bromide and about 80% of the injected SF6 were recovered, and the recoveries of other solutes were comparable with bromide and slightly higher than SF6. A series of Gas-Sparging Biostimulation tests were performed by sparging propane/oxygen/argon/SF6 gas mixtures, and temporal ground water samples were obtained from the injection well under natural gradient 'drift' conditions. The decreased time for propane depletion and the longer time to deplete SF6 as a conservative tracer indicate the progress of biostimulation. Gas-Sparging Activity tests were performed. .Propane utilization, DO consumption, and ethylene and propylene cometabolism were well demonstrated. The stimulated propane-utilizers cometabolized ethylene and propylene to produce ethylene oxide and propylene oxide, as cometabolic by-products, respectively. Gas-Sparging Acetylene Blocking tests were performed by sparging gas mixtures including acetylene to demonstrate the involvement of monooxygenase enzymes. Gas substrate degradation was essentially completely Inhibited in the presence of acetylene, and no production of the corresponding oxides was also observed. The Gas-Sparging tests supports the evidences that the successive stimulation of propane-oxidizing microorganisms, cometabolic transformation of ethylene and propylene by the enzyme responsible for methane and propane degradation.

• 한국물환경학회지
• /
• 제28권4호
• /
• pp.551-560
• /
• 2012

The objectives of this study were to elucidate spatio-temporal heterogeneity of water chemistry and develop empirical models using trophic variables in Daechung Reservoir during 2005-2010 along with in situ tests of nutrient enrichment bioassays (NEB). The relations of water quality parameters in regard to precipitation showed that seasonal and interannual fluctuations of biological oxygen demand (BOD), total nitrogen (TN) and pH were minor, whereas conductivity, suspended solids (SS), and total phosphorus (TP) were largely varied in response to the magnitude of rainfall. The CHL maxima occurred immediately after the spate of TP during the high flow, indicating that phytoplankton growth was directly controlled by phosphorus. Empirical linear models of CHL-TP indicated that the variation of CHL in premonsoon was accounted 60% ($R^2$ = 0.60, p < 0.05, n = 54) by TP. In the mean time, empirical models of annual CHL-TN showed that the variation of CHL was weakly accounted ($R^2$ = 0.16, p < 0.001) by TN and more strongly ($R^2$ = 0.44, p < 0.001) by TP. Thus, the variation of CHL was more explained by the variation of TP than TN. In situ tests of Nutrient Enrichment Bioassays (NEBs) showed that the growth of CHL was greater in the P-treatments (as $PO_4-P$) than the control and N-treatment (as $NO_3-P$). Overall, our results suggest that phosphorus was aprimary limiting nutrient controlling the seasonal phytoplankton growth, based on the in situ experiments of NEBs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.545-552
• /
• 2008

To insure the quality and safety of ground anchors, pull-out test of anchor has to be done. In the individually controlled pull-out test system, pull-out device is used to introduce the same pull-out force to individual tendon that has a different length and a deflection. That is, that device has a separate pull-out oil jack to each tendon, thus the pull-out length of each jack is not the same, but that device introduces each tendon to the same pull-out force. In this study, the in-situ pull-out tests for the compression anchors were performed and its test results were analysed and compared to the results of center hole pull-out tests. In the case of pulling out each tendon using the individually controlled pull-out test device, the pull-out forces were distributed to a individual tendon. That device is excellent one that can solve the cause of unequal pull-out forces of each tendon appearing in the manufacture process and construction of anchors, and unequal pull-out forces due to the deferent length.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.543-554
• /
• 2019

İzmir Bay reserves high amount of residual alluvial deposits generated by Meles River at its stream mouth. These carried sediments with high water content and low bearing capacity are unsuitable in terms of engineering purposes. In-situ soil stabilization with deep soil mixing method is considered to improve properties of soil in this location. This method is widely used especially over Scandinavia, Japan and North America. Basically, the method covers mixing appropriate binder into the soil to improve soil profile according to the engineering needs. For this purpose, soil samples were initially provided from the site, classification tests were performed and optimum ratios of lime and cement binders were determined. Following, specimens representing the in-situ soil conditions were prepared and cured to be able to determine their engineering properties. Unconfined compression tests and vane shear tests were applied to evaluate the stabilization performance of binders on samples with different curing periods. Scanning electron microscope was used to observe time-dependent bonding progress of binders in order to validate the results. Utilization of 4% lime and 4% cement mixture for the long-term performance and 8% lime and 8% cement mixture for short term performance were suggested for the stabilization of Meles Delta soils. Development of CSH and CAH in a gel form as well as CSH crystals were clearly observed on SEM images of treated specimens.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.519-532
• /
• 2012

Using nondestructive testing techniques to evaluate the length or depth of an existing foundation is an important issue with potential high application values. One of these is to evaluate whether the foundation is broken after severe earthquakes. In this aspect, academic research related to nondestructive evaluation for caisson foundations is rarely reported. The objective of this paper is to study the feasibility of using Sonic Echo method to evaluate the depth of caisson foundations. Two types of caissons, simple cylindrical caisson and compound caisson with chambers, were studied for their responses to the Sonic Echo tests. The study was carried out in numerical simulation with finite element method and experimental way with in-situ tests. A bridge system which spans over Sofong Brook in Taiwan was selected for the tests in situ. The bridge system is still under construction and therefore the effect of different construction stages on the testing results may be studied. In this paper, the parameters to be varied for the studies include the testing locations and the existence of chamber plates, the bottom plate and the top plate. Finally some preliminary conclusions can be reached for a successful test.

• Steel and Composite Structures
• /
• 제31권5호
• /
• pp.437-452
• /
• 2019

In this study, in-situ static and dynamic tests of four pre-stressed concrete (PC) track beams with different span lengths and curvatures in a straddle monorail transit system were reported. In the static load tests, the strain and deflection at critical sections of the PC track beams were measured to determine the load bearing capacity and stiffness. The dynamic responses of strain, deflection, acceleration, and displacement at key positions of the PC track beams were measured under different train speeds and train loads to systematically study the dynamic behaviors of the PC track beams. A three-dimensional finite element model of the track beam-vehicle coupled vibration system was established to help understand the dynamic behavior of the system, and the model was verified using the test results. The research results show that the curvature, span length, train speed, and train loads have significant influence on the dynamic responses of the PC track beams. The dynamic performance of the PC track beams in the curve section is susceptible to dynamic loads. Appropriate train loads can effectively reduce the impact of the train on the PC track beam. The PC track beams allow good riding comfort.

• 터널과지하공간
• /
• 제24권3호
• /
• pp.212-223
• /
• 2014

본 연구에서는 고심도 금속광산갱도에 대한 안정성 해석을 수행하였다. 이를 위해 수압파쇄법으로 암반의 초기지압을 측정하였고, 현장에서 채취한 암석코어로 수많은 실내물성시험을 실시하여 무결암의 물성 값을 산출하였으며, 현장조사를 통해 GSI, RMR 분류법으로 암반을 분류하였다. 암반분류 결과에 대한 시나리오 분석과 확률론적 평가를 통해 광산 갱도를 최상조건, 평균조건, 최하조건으로 구분하였으며, 각 조건별 탄소성해석을 통해 갱도의 안정성을 평가하였다. 또한, 갱도의 형상과 발파손상대의 영향을 고려한 해석을 통해 갱도의 적절한 규격과 지보패턴을 조사하였는데, 본 광산 갱도의 안정성 제고를 위해서는 갱도의 천반 곡률반경을 감소시키거나 천정부 보강이 필요한 것으로 나타났다.