• Toxicological Research
• /
• v.13 no.1_2
• /
• pp.39-48
• /
• 1997

Cyclophosphamide(25, 50 or 100 mg/kg), orally administered to male Sprague-Dawley rats, caused a time- and dose-dependent thymic atrophy. In the light microscopic examination of the atrophic thymus, thymocytes with condensed or fragmented nucleus were multifocally observed in the cortical region, started to increase 8 hr after CPA treatment and reached to the maximal level at 16 hr, although such cells were not seen after 48 hr when the severe depletion of thymocytes were marked. In agarose gel electrophoresis to analyze the DNA changes, DNA extracted from atrophic thymus showed a oligonucleosomal laddering at the corresponding time to morphological changes. In an additional supportive experiment, thymocytes showing morphological changes, nuclear condensation or apoptotic body, exhibited a positive reaction to immunoperoxidase staining using in situ apoptosis detection kit. Separately, agarose gel electrophoresis of DNA from bone .marrow cells was performed to investigate the involvement of bone marrow cells in the process of thymocyte apoptosis. Although DNA laddering was slightly increased 2 and 4 hr after treatment, no clear correlation was inferred. Taken togather, it is concluded that thymocytes showing morphological changes in thymic atrophy induced by cyclophosphamide administration represent an apoptosis having biochemical nature of programmed cell death.

• The Korean Journal of Pharmacology
• /
• v.12 no.2 s.20
• /
• pp.13-19
• /
• 1976

A fluid extract of Zizyphi Semen was employed in this experiment. The cardiac effects of Zizyphi Semen were examined on isolated rabbits atria and heart in situ of anesthetized cats and rabbits. The adrenergic blocking activity and refractory period of cardiac muscle were measured after administration of this drug. In rabbits and cats the antiarrhythmic action of Zizyphi Semen on atrial and ventricular arrhythmias produced by epinephrine or ouabain was examined. The results were following: 1. Zizyphi Semen produced a decrease in rate and contractile amplitude of the isolated rabbit atria and had a week blocking effect on epinephrine acceleration of atrial movement. 2. Zizyphi Semen effectively abolished the spontaneous arrhythmia occurring in the isolated rabbit atria ana the atrial arrhythmia induced by ouabain. 3. Zizyphi Semen produced a marked prolongation of the refractory period in isolated atrial muscle of rabbit. 4. Zizyphi Semen prevented the induction of ventricular arrhythmia arising from excessive dose of epinephrine in anesthetized rabbits and cats. 5. With regard to the ventricular arrhythmia induced by a continuous infusion of ouabain, Zizyphi Semen exerted suppressive effect and produced a marked prolongation of cardiac arrest time in anesthetized rabbits and cats. From the above results, it may be concluded that Zizyphi Semen is effective against atrial and ventricular arrhythmias. The antiarrhythmic effect of this drug may be the result of direct myocardial depressive and partially adrenergic beta receptor blocking activities including prolongation of the refractory period of cardiac muscle.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.223-236
• /
• 1999

The need to monitor and undertake remidial works on large structures has greatly increased in recent years due to the appearance of widespread faults in large structures such as bridges and buildings, etc, of 20 or more years of age. The health condition of structures must be monitored continuously to maintenance the structures. In order to do in-situ monitoring, the sensor is necessary to be embedded in the structures. Fiber optic sensors can be embedded in the structures to get the health information in the structures. The fiber sensor was constructed with $3{\times}3$ fiber couplers to sense the multi-point strains and failure instants. The 4 RC (reinforced concrete) beams were made to 2 of A type, 2 of B type beams. These beams were reinforced by the reinforcing bars, and were tested under the flexural loading. The behavior of the beams was simultaneously measured by the fiber optic sensors, electrical strain gages, and LVDT. The states of the beams were interpreted by these all signals. By these experiments, There were verified that the fiber optic sensors could measure the structural strains and failure instants of the RC beams, The fiber sensors were well operated until the failure of the beams. It was shown that the strains of the reinforcing steel bar can be used to monitor the health condition of the beams through the flexural test of RC beams. On the other words, the results were arrived that the two strains in the reinforcing bar measured at the same point can give the information of the structural health status. Also, the failure instants of beams were well detected from the fiber optic filtered signals.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.99-109
• /
• 1999

In the case of domestic general waste landfills, cumulated leachate level is often formed in the landfill due to the waste of high moisture content and it becomes important to characterize the hydraulic properties of the disposed waste. Although many hydrologic studies have been peformed for leachate barriers and pheriperal subsurface environments, few studies have been done to investigate the hydraulic property of the disposed waste and cover soils and to analyse the leachate flow behavior within landfills. In this paper, the geotechnical properties of the waste and buried cover soils are identified through the field experiment including pumping and slug tests. The results of various tests show that the field density of the cover soils is somewhat higher than the maximum laboratory density of cover soils and the vertical flow of leachate and gas in the landfill is prevented by the buried cover soils. The hydraulic conductivities of field pumping test and slug tests are well matched and stayed in the range of hydraulic conductivities of well compacted wastes in the literature.

• Journal of Environmental Science International
• /
• v.18 no.6
• /
• pp.691-698
• /
• 2009

Trickling filter has been extensively studied for the domestic wastewater treatment especially for the small scale plants in rural area. The performance of the trickling filter depends on the microbial community and their activity in the biofilms on the media. Nitrification. denitrification, and phosphorus removal of the trickling filter from the wastewater depend on the activity and the amount of the specific microorganisms responsible for the metabolism. For the estimation of the performance of a trickling filter, batch nitrification experiment and fluorescence in situ hybridization (FISH) were carried out to measure the microbial activity and its distribution on the media of the trickling filter. Batch nitrification activity measurement showed that the top part of the 1st stage trickling filter had the highest nitrification activity and the maximum activity was 0.002 g $NH_4$-N/g MLVSS${\cdot}$h. It is thought that higher substrate (ammonia) concentration yields more nitrifying bacteria in the biofilms. The dominant ammonia oxidizer and nitrite oxidizer in the biofilm were Nitrosomonas species and genus Nitrospira, respectively, by FISH analysis. Less denitrifiers were found than nitrifiers in the biofilm by the probe Rrp1088 which specifically binds to Rhodobacter, Rhodovulum, Roseobacter, and Paracoccus. Phosphorus accumulating bacteria were mostly found at the surface of the biofilm by probe Rc988 and PAO651 which specifically binds to Rhodocyclus group and their biomass was less than that of nitrifiers.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.32-36
• /
• 2021

The number of processes in the manufacture of semiconductors, displays and solar cells is increasing. And as the processes is performed, multiple layers of films and various patterns are formed on the wafer. At this time, substrate warpage occurs due to the difference in stress between each film and pattern formed on the wafer. the substrate warping phenomenon occurs due to the difference in stress between each film and pattern formed on the wafer. We developed a new warpage measurement method to measure wafer warpage during real-time processing. We performed an experiment to measure the presence and degree of warpage of the substrate in real time during the process by adding only measurement equipment for applying additional electrical signals to the existing ESC and detecting the change of the additional electric signal. The additional electrical measurement signal applied at this time is very small compared to the direct current (DC) power applied to the electrostatic chuck whit a frequency that is not generally used in the process can be selectively used. It was confirmed that the measurement of substrate warpage can be easily separated from other power sources without affecting.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.15-27
• /
• 2020

Streamflow discharge as a fundamental riverine quantity plays a crucial role in water resources management, thereby requiring accurate in-situ measurement. Recent advances in instrumentations for the streamflow discharge measurement has complemented or substituted classical devices and methods. Among various potential methods, surface current meter using microwave has increasingly begun to be applied not only for flood but also normal flow discharge measurement, remotely and safely enabling practitioners to measure flow velocity postulating indirect contact. With minimized field preparedness, this method facilitated and eased flood discharge measurement in the difficult in-situ conditions such as extreme flood in active ways emitting 24.125 GHz microwave without relying on natural lights. In South Korea, a rectangular shaped instrument named with Microwave Water Surface Current Meter (MWSCM) has been developed and commercially released around 2010, in which domestic agencies charging on streamflow observation shed lights on this approach regarding it as a potential substitute. Considering this brand-new device highlighted for efficient flow measurement, however, there has been few noticeable efforts in systematic and comprehensive evaluation of its performance in various measurement and riverine conditions that lead to lack in imminent and widely spreading usages in practices. This study attempted to evaluate the MWSCM in terms of instrumen's monitoring configuration particularly regarding tilt and yaw angle. In the middle of pointing the measurement spot in a given cross-section, the observation campaign inevitably poses accuracy issues related with different tilt and yaw angles of the instrument, which can be a conventionally major source of errors for this type of instrument. Focusing on the perspective of instrument configuration, the instrument was tested in a controlled outdoor river channel located in KICT River Experiment Center with a fixed flow condition of around 1 m/s flow speed with steady flow supply, 6 m of channel width, and less than 1 m of shallow flow depth, where the detailed velocity measurements with SonTek micro-ADV was used for validation. As results, less than 15 degree in tilting angle generated much higher deviation, and higher yawing angle proportionally increased coefficient of variance. Yaw angles affected accuracy in terms of measurement area.

• Journal of Powder Materials
• /
• v.20 no.1
• /
• pp.53-59
• /
• 2013

Fe-TiC composite powder was fabricated via two steps. The first step was a high-energy milling of FeO and carbon powders followed by heat treatment for reduction to obtain a (Fe+C) powder mixture. The optimal condition for high-energy milling was 500 rpm for 1h, which had been determined by a series of preliminary experiment. Reduction heat-treatment was carried out at $900^{\circ}C$ for 1h in flowing argon gas atmosphere. Reduced powder mixture was investigated by X-ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM) and Laser Particle Size Analyser (LPSA). The second step was a high-energy milling of (Fe+C) powder mixture and additional $TiH_2$ powder, and subsequent in-situ synthesis of TiC particulate in Fe matrix through a reaction of carbon and Ti. High-energy milling was carried out at 500 rpm for 1 h. Heat treatment for reaction synthesis was carried out at $1000{\sim}1200^{\circ}C$ for 1 h in flowing argon gas atmosphere. X-ray diffraction (XRD) results of the fabricated Fe-TiC composite powder showed that only TiC and Fe phases exist. Results from FE-SEM observation and Energy-Dispersive X-ray Spectros-copy (EDS) revealed that TiC phase exists uniformly dispersed in the Fe matrix in a form of particulate with a size of submicron.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.3
• /
• pp.199-204
• /
• 2006

The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with $NH_4^+\;and\;NO_2^-$ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescence in situ hybridization (FISH) technique. By the last month of operation, the consumed $NO_2^--N/NH_4^+-N$ ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influent-shutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.816-824
• /
• 2005

The effects of the nonionic surfactant Tween 80 and a mixture of fibrolytic enzymes on total tract digestion, in situ disappearance (ISD) and ruminal fermentation characteristics of orchardgrass hay and barley grain were investigated in a 4${\times}$4 Latin square experiment with 4 non-lactating Holstein cows and 4 diets in 4 periods. Cows were offered a total mixed ration of 50% rolled barley grain and 50% orchardgrass hay treated with either 1) water (control), 2) 0.2% (vol/wt) Tween 80, 3) 0.2% (vol/wt) hydrolytic enzyme, or 4) 0.2% hydrolytic enzyme plus 0.2% Tween 80. Total tract digestibility coefficients of DM, nitrogen, NDF and ADF were not affected (p>0.05) by dietary treatment. Compared to the control, the rate of ISD of DM from orchardgrass hay was faster (p<0.05) in cows receiving diets treated with the enzyme alone or with enzyme plus Tween 80 (0.06/h vs. 0.076 and 0.069/h). The rate of digestion was lower (p<0.05) as compared to control when barley grain was treated with these additives. Ruminal fluid pH and concentrations of total VFA, acetate, isobutyrate and butyrate were not affected (p>0.05) by treatments. Cows that consumed diets treated with enzyme plus Tween 80 had higher (p<0.05) ruminal concentrations of propionate and isovalerate, and lower (p<0.05) acetate:propionate ratios. Compared to the control, microbial protein synthesis tended (p = 0.13) to increase with the addition of enzyme to the diet while nonammonia nitrogen flow to the duodenum increased (p<0.05) with both enzyme and Tween 80 treatments. The study indicated that fibrolytic enzymes alone or in combination with Tween 80 could enhance ISD of orchardgrass hay and ruminal concentrations of propionate, valerate and iso-valerate, but do not affect total tract digestibility.