• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.1-14
• /
• 2022

This study is a plan on the way to strengthen the survival ability by increasing the use time of air respirator by applying emergency breathing method in the situation where firefighter has to wait for RIT (Rapid Intervention Teams) because it is impossible to escape by himself or emergency escape during isolation during field activities. The research procedure first drew problems by conducting a survey on fire fighters under the Seoul Fire and Disaster Headquarters, and conducted an experiment to compare normal breathing and emergency breathing with 20 members of the Seoul 119 Special Rescue Team, and suggested emergency breathing method and training process modeling that can be applied to each field situation based on the data obtained. The experiment was conducted over 9 weeks, and it was divided into three categories: field activity situation, movement (emergency escape assumption) situation, and place (assume waiting for RIT). In the field activity situation experiment, it was confirmed that the application of skip breathing method was appropriate and the use time of air respirator increased about 1.6 ~ 1.9 times. In the moving situation or the in-situ situation, wheel breathing method was appropriate and the use time of air respirator increased about 1.6 ~ 2.4 times. However, when conducting intense activities in the field activity situation, it is recommended to use it limitedly because it is difficult to apply the emergency breathing method. If emergency breathing is not clearly learned in the body, it is difficult to use in the field, so I think systematic and continuous training is necessary. This study suggests that the application of emergency breathing method is effective enough to strengthen the survival ability of firefighters in the field.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.402-407
• /
• 2003

Karyotype analysis and chromosomal localization of 5S and 45S rDNAs using multi-color fluorescence in situ hybridization (McFISH) technique were carried out in Bupleurum longeradiatum. Somatic metaphase chromosome number was 2n=12. Karyotype was composed of three pairs of metacentrics (No.3, 4 and 6) and three pairs of submetacentrics (No. 1, 2 and 5). The length of somatic prometaphase chromosomes ranges from 2.55 to $5.05{\mu}m$ with total length of $18.15\;{\mu}m$. In FISH experiment, one pair of 5S rDNA signals was detected on the pericentromeric region of chromosome 4 and one pair of 45S rDNA signals was detected on the telomeric region of chromosome 2.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.219-234
• /
• 1998

Modulus measurements in vertical boreholes under simulated horizontal in-situ stress conditions were performed on laboratory rock specimens. The experimental program was focused on the examination of modulus change with the variation of the orientation, magnitude and ratios of horizontal biaxial stresses. The experiment results show that the modulus increases when the magnitude of the horizontal stresses increases. The modulus measured in the minimum principal direction increased when the ratio between the horizontal principal stresses increased, while the modulus measured in the maximum principal direction decreased when the ratio of the horizontal principal stresses increased. These were caused by the tangential stresses that vary depending upon the magnitude of horizontal stresses, the applied pressure and the orientation of measurement. Also, the measured moduli were determined under tensile stress, compressive stress, or both stresses. Thus, the stress effect on deformation modulus should be considered, not only for the interpretation of the results of borehole deformability measurement, but also for the design of underground gas storage and pressure tunnel, and for the interpretation of tunnel monitoring.

• Structural Engineering and Mechanics
• /
• v.43 no.3
• /
• pp.287-309
• /
• 2012

Precast segmental bridge columns (PSBC) are alternatives for monolithic cast-in-situ concrete columns in bridge substructures, with fast construction speed and structural durability. The analytical tool for common use is demonstrated applicable for seismic performance prediction of PSBCs through experiment conducted earlier. Then the analytical program was used for parameter optimization of PSBC configurations under reversal cyclic loading. Shear strength by pushover analysis was compared with theoretical prediction. Moreover, seismic response of PSBC with energy dissipation (ED) bars was compared with its no ED bar counterpart under three history ground acceleration records. The investigation shows that appropriate ED bar and post-tensioned tendon arrangement is important for higher lateral bearing capacity and good ductility performance of PSBCs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.379-379
• /
• 2010

$Hg_{1_x}Cd_xTe$ (MCT) was grown by hot wall epitaxy. Prior to the MCT growth, the CdTe (111) buffer layer was grown on the GaAs substrate at the temperature of $590^{\circ}C$ for 15 min. When the thickness of the CdTe buffer layer was $5\;{\mu}m$ or thicker, the full width at half maximum values obtained from the x-ray rocking curves were found to significantly decrease. After a good quality CdTe buffer layer was grown, the MCT epilayers were grown on the CdTe (111) /GaAs substrate at various temperatures in situ. The crystal quality for those epilayers was investigated by means of the x-ray rocking curves and the photocurrent experiment. The photoconductor characterization for the epilayers was also measured. The energy band gap of MCT was determined from the photocurrent measurement and the x composition rates from the temperature dependence of the energy band gap were turned out.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.434-445
• /
• 2010

Underground compressed air energy storage (CAES) system in a lined rock cavern is considered one of the promising large-scale energy storage technologies. In this study, permeabilities of concrete lining block and its construction joint, which are the major components of an air tightness system of the undeground CAES, were measured from a model experiment. From the experiment, it was found that intrinsic permeability of construction joint was larger than that of concrete block by the order scale of $10^1{\sim}10^4$, so that it would be very important to control the quality of construction joints in-situ in order to secure air tightness of storage system. And the permeability of construction joint could be decreased as low as that of the concrete block by pasting an acryl-type adhesive on bonding surfaces. Higher degrees of water saturation of the concrete block resulted in the lower permeability, which is more preferable in the viewpoint of air tightness of storage cavern.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.37-45
• /
• 2022

In-situ pilot experiment was carried out to establish a countermeasure on the soil loss from the hill side uplands that was rehabilitated by soil remediation method nearby abandoned mine sites for 2 years. It was considered that the affect of an inclination of cover surface, a stabilization treatment of cover layer by lime and steel refining slag (SRS) and a vegetation of soil surface as an effect factors in the experiment. It was constructed 4 lysimeters (plots, 22 m long, 4 m width) on the hilly side (37% inclination). One plot was control and two plots was treated by 1% lime and SRS. A remind one plot was modified a inclination to 27% to compare the affect of inclination on the amount of cover soil loss. It was attached a reservior tank and water level gauge in the end of lysimeters to measure the amount of the surface water flow and soil loss. It was also installed the automated sensors that could be collect the precipitation, soil moisture content, tension of cover layer in each plots. It was observed that the event of precipitation were caused the soil loss and it were related the physical and chemical properties of cover soil and inclination of surface layer of plots. During the experiment, it was exceeded the national regulation (50 t/ha/yr) in 37% inclination plots even though it was vegetated on the cover soil surface. However, in 27% inclination plot, it was shown that the amount of soil loss was maintained below the national regulation and, more ever, vegetation could reduce the the amount of soil loss. Therefore it was expected that such results could be applied to the future design of rehabilitation projects on the polluted farmland nearby abandoned mine sites.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.857-863
• /
• 1998

A simple and new experimental method for determination of lysozyme-M. lysodeikticus cell lysis reaction and lysozyme activity was suggested using Beer's law. The UV transmittance of the solution changed with the concentration of M. lysodeikticus and the relationship between the UV transmittance and M. lysodeikticus cell concentration followed Beer's Law. In addition, it was experimentally proven that the UV transmittance of the solution was not influenced by the lysozyme concentration and product of the lysis reaction. During the lysozyme-M. lysodeikticus cell lysis reaction, thus, M. lysodeikticus cell concentration in the solution could be measured in-situ by UV-spectrophotometer. By using these experimental data, kinetic Parameters of the Michaelis-Menten equation for the lysozyme-M. lysodeikticus cell 1ysis reaction was simply determined The maximum reaction rate constant ($k_3$) and Michaelis-Menten constants were $0.1734sec^{-1}$ and $9.83{\times}10^{-6}M$ respectively. The activity of the lysozyme could also be obtained with this experiment because the lysis reaction rate of the 1ysozyme depended on its activity.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.147-154
• /
• 2017

Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.99-103
• /
• 2007

The purpose of this study was to develop a simple detection method, possibly at the species-level, that allows for large-scale screening of bifidobacteria. Human fecal samples were plated on MRS-raffinose agar containing cysteine and neomycin sulfate, serving as selective pressure for bifidobacteria, and 0.003%(w/v) bromocresol green. All of the test strains grew well on this medium at $37{\pm}1^{\circ}C$, forming white colonies surrounded by yellow halos, which presented a sharp contrast against the green background. In this disc assay, the required incubation time to develop a yellowish zone varied with the species of Bifidobacterium that was tested, allowing for differential counts and easy identification at the species-level: 10-14 hr for B. bifidum, 20-22 hr for B. catenulatum and B. infantis. and 24-25 hr for B. longum and B. breve. No apparent color was observed for B. angulatum and B. adolescentis 28 hr after inoculation. To evaluate the results of pH indicator-based identification, individual isolates were subjected to a colony-PCR experiment with genus-specific primers. The amplified products from the isolates were in good accordance with those from the reference strains at a level of 95% agreement. These results suggest that the present method could be conveniently applied to cell counts, as well as to the preliminary identification of bifidobacteria from a variety of sample types including human feces, dairy products, and commercial probiotic supplements.