• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.10a
• /
• pp.89-110
• /
• 2003

The limitations of conventional soil and groundwater contamination remediation technologies have motivated a search for innovative technologies; particularly in situ technologies that do not require extraction of contaminants from the subsurface. All engineered in situ remediation systems require that the contaminant be mixed with a remedial compound. Horizontal flow treatment wells (HFTWs), an innovative technology that consists of a pair of dual-screened treatment wells, were used at a trichloroethylene (TCE) contaminated site to efficiently achieve this mixing of contaminant and remedial compound in order to effect in situ bioremediation (McCarty et al., 1998). In this paper, the potential of HFTWs to treat chlorinated aliphatic hydrocarbons (CAHs) as well as other soil and groundwater contaminants of concern, such as nitroaromatic compounds (NACs), perchlorate, and methyl-tert-butyl ether (MTBE), is examined. Through a combination of laboratory studies, model analyses, and field evaluations, the effectiveness of this innovative technology to manage these contaminants is investigated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.44-54
• /
• 2013

Replacing OMG (old magazine) to ONP (old newspaper) by raising optical property through $CaCO_3$ in-situ precipitation method in white duplex board presents cost reduction and possible drying energy saving. The strength property impairment by the presence of $CaCO_3$ could be supplemented by the fiber furnish treatment or strength polymer addition. In $CaCO_3$ in-situ precipitation of ONP, it was found from morphological study using FlowCAM, an image analyzer, that most of calcium carbonate were formed on the fines, and made the size of the fines larger. For the case of forming calcium carbonate only on the fractionated fines, the size of the fines were the biggest, and there were more clean surface areas available for bonding for the fractionated long fibers when fractionated fibers and fines were regrouped to make paper.

• Journal of the Korean Society of Radiology
• /
• v.83 no.4
• /
• pp.898-903
• /
• 2022

The incidence of ductal carcinoma in situ has increased with the rise in screening mammography; currently, ductal carcinoma in situ constitutes 20%-25% of all breast cancers, and up to half of them may become invasive. Its early detection is critical in improving the cure rate. Moreover, MRI has higher sensitivity for its detection than mammography. Herein, we report an unusual case of ductal carcinoma in situ presenting as a continuous, serpentine, linear enhancement with regional distribution on MRI.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.92-93
• /
• 2014

Green Frame is a method for Rahmen structure construction composed of composite PC members. The composite PC members of Green Frame which are based on in-situ production can reduce the construction cost and are more likely to secure quality when compared to production in factories. Previous studies developed forms for in-situ production of Green Frame composite PC members and proposed algorithms to arrange them on site. However, it requires not only their arrangement, but also calculation of an accurate production period to produce the required PC members in a limited space and supply them in a timely manner. In particular, it is necessary to clearly define the properties of detailed processes for in-situ production of PC members and to calculate the time required for respective process. To do so, this study is a basic research on calculating the time for in-situ production using a linear scheduling method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1359-1367
• /
• 2000

In-situ particle monitors(ISPMs) are widely used for monitoring contaminant particles in vacuum-based semiconductor manufacturing equipment. In the present research, the performance of a Particle Measuring Systems(PMS) Vaculaz-2 ISPM at low pressures has been studied. We generated the uniform sized methylene blue particle beams using three identical aerodynamic lenses in the center of the vacuum line, and measured the detection efficiency of the ISPM. The effects of particle size, particle concentration, mass flow rate, system pressure, and arrangement of aerodynamic lenses on the detection efficiency of the ISPM were examined. Results show that the detection efficiency of the ISPM greatly depends on the mass flow rate, and the particle Stokes number. We also found that the optimum Stokes number ranges from 0.4 to 1.9 for the experimental conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.477-484
• /
• 2001

In this paper shows the evaluation of the liquefaction potential of soils using in situ test. There are different types of in situ test used in the evaluation the liquefaction potential. In the particular study the Standard penetration test(SPT), Cone penetration test(CPT), ad Seismic cone penetration test (SCPT) were used. The SPT N value has been used all over for a very long time. The evaluation of the liquefaction of soil was preformed using the worldwide renowned CPT and SCPT. Shake 91 program was used to evaluate the results obtained by different in situ test and were later analyzed.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.417-420
• /
• 2009

The purpose of this report is to describe our surgical experiences in the treatment of cerebral decompression with in situ floating resin cranioplasty. We included in this retrospective study 7 patients who underwent in situ floating resin cranioplasty for cerebral decompression between December 2006 and March 2008. Of these patients, 3 patients had traumatic brain injury, 3 cerebral infarction, and one subarachnoid hemorrhage due to aneurysmal rupture. In situ floating resin cranioplasty for cerebral decompression can reduce complications related to the absence of a bone flap and allow reconstruction by secondary cranioplasty without difficulty. Furthermore, it provides cerebral protection and selectively eliminates the need for secondary cranioplasty in elderly patients or patients who have experienced unfavorable outcome.

• Geomechanics and Engineering
• /
• v.21 no.6
• /
• pp.527-536
• /
• 2020

An elastic-plastic solution for cavity expansion problem considering strength degradation, undrained condition and initial anisotropic in-situ stress is established based on the Tresca yield criterion and cavity expansion theory. Assumptions of large-strain for plastic region and small-strain for elastic region are adopted, respectively. The initial in-situ stress state of natural soil mass may be anisotropic caused by consolidation history, and the strength degradation of soil mass is caused by structural damage of soil mass in the process of loading analysis (cavity expansion process). Finally, the published solutions are conducted to verify the suitability of this elastic-plastic solution, and the parametric studies are investigated in order to the significance of this study for in-situ soil test.

• Applied Microscopy
• /
• v.51
• /
• pp.8.1-8.7
• /
• 2021

Growing demands for comprehending complicated nano-scale phenomena in atomic resolution has attracted in-situ transmission electron microscopy (TEM) techniques for understanding their dynamics. However, simple to safe TEM sample preparation for in-situ observation has been limited. Here, we suggested the optical microscopy based micro-manipulating system for transferring TEM samples. By adopting our manipulator system, several types of samples from nano-wires to plate-like thin samples were transferred on micro-electro mechanical systems (MEMS) chip in a single step. Furthermore, the control of electrostatic force between the sample and the probe tip is found to be a key role in transferring process.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.552-554
• /
• 2003

The development of high performance single nanoparticle ion trap (SNIT) apparatus for studying in-situ dynamics of single nanoparticles in controlled environments is described. The performance of SNIT apparatus has been evaluated for 500 nm SiO₂particles. The mass resolution of ~100 ppm and the capability of varying the charge states independently have been demonstrated.