• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.101-114
• /
• 2009

Potsherds and kilns of the AD 3th century excavated from Gundong and Majeon sites, Korea were studied to investigate the production techniques and provenance of potsherds and kilns on the pastes. For potsherds, kilns blocks and in-situ paleo-soils, provenance of raw materials were estimated through mineralogy and geochemistry, while production technique and thermal feature of kilns were investigated through observation of textures and compositions as well as firing experiment on paleo-soils. As a result of study, potsherds and kilns were found to have similar mineralogical compositions as the neighboring paleo-soils and to have same evolution path with that of geochemistry. The potsherds were divided into 3 groups according to firing temperature and production technique. Group 1 consists of reddish stamped pattern pottery with loose textures, which has many pores and contains many iron oxides. Its temper is less than about 0.5mm, and was probably fired between 700 to $800^{\circ}C$. Group 2 contains ash to grayish blue stamped pattern pottery, which has vitrified texture and few pores. Its temper is less than about 0.5mm, and was probably fired from 900 to $1,000^{\circ}C$. However, some potsherd belongs to the group 2 in terms of features for temper and pastes, but it was probably fired over $1,100^{\circ}C$. Group 3 contains reddish and grayish stamped pattern pottery. It has vitrified matrix, few pores and temper consists of polycrystalline quartz and feldspar over 2mm, and it was probably fired around $1,000^{\circ}C$. The kiln had experienced temperature from 600 to $700^{\circ}C$ on the wall, from 900 to $1,000^{\circ}C$ on the bottom, suggesting the function of high temperature firing.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.557-575
• /
• 2020

Plasma blasting which is generated by high voltage arc discharge of electricity is applied to soil mass to improve permeability of soil and cleaning efficiency of oil contamination. A new high voltage generator was manufactured and three types of soil including silty sand, silty sand mixed with lime and silty sand mixed with cement were prepared. Small and large soil columns were produced using these types of soil and plasma blasting was performed within soil columns to investigate the variation of soil volume penetrated by fluid and permeability. Soil volume penetrated by fluid increased by 11~71% when plasma blasting was applied in soil. Although plasma blasting with low electricity voltage induced horizontal fracture and fluid penetrated along this weak plane, plasma blasting with high voltage induced spherical penetration of fluid. Plasma blasting increased the permeability of soil. Permeabilty of soils mixed with lime and cement increased by 450~1,052% with plasma blasting. Permeability of soil increased as discharge voltage increased when plasma blasing was applied once. However, several blastings with the same discharge voltage increase or decrease permeability of soil. Oil contaminated soil was prepared by adding diesel into soil artificially and plasma blasting was performed in these oil contaminated soil. Cleaning efficiency increased by average of 393% for soil located nearby the blasting and by average of 239% for soil located far from the blasting. Cleaning efficiency did not show any correlation with discharge voltage. All these results indicated that plasma blasting might be used for in-situ cleaning of oil contaminated soil because plasma blasting increased permeability of soil and cleaning efficiency.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.515-530
• /
• 2021

This study is to estimate soil moisture (SM) using Sentinel-1A/B C-band SAR (synthetic aperture radar) images and Multiple Linear Regression Model(MLRM) in the Yongdam-Dam watershed of South Korea. Both the Sentinel-1A and -1B images (6 days interval and 10 m resolution) were collected for 5 years from 2015 to 2019. The geometric, radiometric, and noise corrections were performed using the SNAP (SentiNel Application Platform) software and converted to backscattering coefficient of VV and VH polarization. The in-situ SM data measured at 6 locations using TDR were used to validate the estimated SM results. The 5 days antecedent precipitation data were also collected to overcome the estimation difficulty for the vegetated area not reaching the ground. The MLRM modeling was performed using yearly data and seasonal data set, and correlation analysis was performed according to the number of the independent variable. The estimated SM was verified with observed SM using the coefficient of determination (R²) and the root mean square error (RMSE). As a result of SM modeling using only BSC in the grass area, R² was 0.13 and RMSE was 4.83%. When 5 days of antecedent precipitation data was used, R² was 0.37 and RMSE was 4.11%. With the use of dry days and seasonal regression equation to reflect the decrease pattern and seasonal variability of SM, the correlation increased significantly with R² of 0.69 and RMSE of 2.88%.

• Clean Technology
• /
• v.29 no.1
• /
• pp.10-21
• /
• 2023

Hydrogels that are made of natural polymer-based double networks have excellent biocompatibility, low cytotoxicity, and high water content, assuring that the material has the properties required for a variety of biomedical applications. However, hydrogels also have limitations due to their relatively weak mechanical properties. In this study, hydrogels based on an alginate di-aldehyde (ADA) and gelatin (Gel) double network that is reinforced with additional hydrogen bonds formed between the hydroxyl (-OH) groups of the hyperbranched polymer (HPG) and the functional groups present inside of the hydrogels were successfully synthesized. The enhanced mechanical properties of these synthesized hydrogels were evaluated by varying the amount of HPG added during the hydrogel synthesis from 0 to 25%. In addition, magnetite nanoparticles (Fe₃O₄ NPs) were synthesized within the hydrogels and the structures and the magnetic properties of the hydrogels were also characterized. The hydrogels that contained 15% HPG and Fe₃O₄ NPs exhibited superparamagnetic behaviors with a saturation magnetization value of 3.8 emu g^-1. These particular hydrogels also had strengthened mechanical properties with a maximum compressive stress of 1.1 MPa at a strain of 67.4%. Magnetic hydrogels made with natural polymer-based double networks provide improved mechanical properties and have a significant potential for drug delivery and biomaterial application.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.207-221
• /
• 2023

This study suggests deep neural network models for estimating air temperature with Level 1B (L1B) datasets of GEO-KOMPSAT-2A (GK-2A). The temperature at 1.5 m above the ground impact not only daily life but also weather warnings such as cold and heat waves. There are many studies to assume the air temperature from the land surface temperature (LST) retrieved from satellites because the air temperature has a strong relationship with the LST. However, an algorithm of the LST, Level 2 output of GK-2A, works only clear sky pixels. To overcome the cloud effects, we apply a deep neural network (DNN) model to assume the air temperature with L1B calibrated for radiometric and geometrics from raw satellite data and compare the model with a linear regression model between LST and air temperature. The root mean square errors (RMSE) of the air temperature for model outputs are used to evaluate the model. The number of 95 in-situ air temperature data was 2,496,634 and the ratio of datasets paired with LST and L1B show 42.1% and 98.4%. The training years are 2020 and 2021 and 2022 is used to validate. The DNN model is designed with an input layer taking 16 channels and four hidden fully connected layers to assume an air temperature. As a result of the model using 16 bands of L1B, the DNN with RMSE 2.22℃ showed great performance than the baseline model with RMSE 3.55℃ on clear sky conditions and the total RMSE including overcast samples was 3.33℃. It is suggested that the DNN is able to overcome cloud effects. However, it showed different characteristics in seasonal and hourly analysis and needed to append solar information as inputs to make a general DNN model because the summer and winter seasons showed a low coefficient of determinations with high standard deviations.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.237-245
• /
• 2002

Purpose : This study was conducted to evaluate the treatment results, prognostic factors, and complication rates after high dose rate (HDR) brachytherapy in patients with uterine cervix cancer who were treated with curative aim. Materials and Methods : Of 269 cervix cancer patients treated at the department of radiation oncology, Samsung Medical Center from September 1994 to July 1998, the 106 who were treated with radical radio-therapy were analyzed. The median age was 61 years (range 22 to 89). All patients except 4 with carcinoma in situ (CIS) were given external beam radiotherapy (range $30.6\~50.4\;Gy$ to whole pelvis) and HDR brachytherapy. The common regimens of HDR brachytherapy were a total dose of $24\~28\;Gy$ with $6\~7$ fractions to point A at two fractions per week. The median overall treatment time was 55 days (range 44 to 104) in patients given both external beam radiotherapy and HDR brachytherapy. Results : Early responses of radiotherapy were evaluated by gynecologic examination and follow-up MRI 1 month after radiotherapy. Treatment responses were complete remission in 72 patients, partial response in 33 and no response in 1. The overall survival (OS) rate of all patients was $82\%,\;and\;73\%$, and the disease free survival (DFS) rate was $72\%,\;and\;69\%$, at 3, and 5 years, respectively. The pelvic control rate (PCR) was $79\%$ at both 3 and 5 years. According to the FIGO stage,3 and 5 year OS were $100\%\;and\;50\%$ in CIS/IA, $100\%\;and\;100%$ in IB, $83\%\;and\;69\%$ in IIA, $87\%\;and\;80\%$ in IIB, and $62\%\;and\;62\%$ in III, respectively. The 3 year OS in 4 patients with stage IVA was $100\%$. Three-year DFS were $80\%$ in CIS/IA, $88\%$ in IB, $100\%$ in IIA, $64\%$ in IIB, $58\%$ in III, and $75\%$ in IVA. Three-year PCR were $100\%$ in CIS/IA, $94\%$ in IB, $100\%$ in IIA, $84\%$ in IIB, $69\%$ in III, and $50\%$ in IVA. By univariate analysis, FIGO stage and treatment response were significant factors for OS. The significant factors for DFS were age, FIGO stage, treatment response and overall treatment time (OTT). For pelvic control rate, treatment response and OTT were significant factors. By multivariate analysis, FIGO stage had a borderline significance for OS (p=0.0825) and treatment response had a borderline significance for DFS (0=0.0872). A total of 14 patients $(13\%)$ experienced rectal bleeding, which occurred from 3 to 44 months (median, 13 months) after the completion of radiotherapy. Conclusion : HDR brachytherapy protocol of Samsung Medical Center combined with properly optimal external beam pelvic irradiation is a safe and effective treatment for patients with uterine cervix cancer. The authors found that OTT of less than 55 days had a positive impact on pelvic control and survival rate.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.77-98
• /
• 1993

The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.302-314
• /
• 2023

This study aims to explore the direction for Korea's effective response to Target 3 (30by30), which can be said to be the core of the Kunming-Montreal Global Biodiversity Framework (K-M GBF) of the Convention on Biological Diversity (CBD), to find the direction of systematic OECM (Other Effective area-based Conservation Measures) discovery at the national level through a survey of global conceptual review and expert perception of OECM. This study examined ① the use of Korean terms related to OECM, ② derivation of determining criteria reflecting global standards, ③ deriving types of potential OECM candidates in Korea, and ④ considerations for OECM identification and reporting to explore the direction for identifying systematic, national-level OECM that complies with global standards and reflects the Korean context. First, there was consensus for using Korean terminology that reflects the concept of OECM rather than simple translations, and it was determined that "nature coexistence area" was the most preferred term (12 people) and had the same context as CBD 2050 Vision of "a world of living in harmony with nature." This study suggests utilizing four criteria (1. No protected areas, 2. Geographic boundaries, 3. Governance/management, and 4. Biodiversity value) that reflect OECM's core characteristics in the first-stage selection process, carrying out the consensus-building process (stage 2) with the relevant agencies, and adding two criteria (3-1 Effectiveness and sustainability of governance and management and 4-1 Long-term conservation) and performing the in-depth diagnosis in stage 3 (full assessment for reporting). The 28 types examined in this study were generally compatible with OECMs (4.45-6.21/7 points, mean 5.24). In particular, the "Conservation Properties (6.21 points)" and "Conservation Agreements (6.07 points)", which are controlled by National Nature Trust, are shown to be the most in line with the OECM concept. They were followed by "Buffer zone of World Natural Heritage (5.77 points)", "Temple Forest (5.73 points)", "Green-belt (Restricted development zones, 5.63 points)", "DMZ (5.60 points)", and "Buffer zone of biosphere reserve (5.50 point)" to have high potential. In the case of "Uninhabited Islands under Absolute Conservation", the response that they conformed to the protected areas (5.83/7 points) was higher than the OECM compatibility (5.52/7 points), it is determined that in the future, it would be preferable to promote the listing of absolute unprotected islands in the Korea Database on Protected Areas (KDPA) along with their surrounding waters (1 km). Based on the results of a global OECM standard review and expert perception survey, 10 items were suggested as considerations when identifying OECM in the Korean context. In the future, continuous research is needed to identify the potential OECMs through site-level assessment regarding these considerations and establish an effective in-situ conservation system at the national level by linking existing protected area systems and identified OECMs.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.210-218
• /
• 2012

The morphological characteristics, carbon and nitrogen concentrations, stable isotope values and photosynthetic rates of Porphyra yezoensis were studied at the main purple lavers production areas on southwestern coast of Korea. The morphological characteristics of leaf length, leaf width and weight of Porphyra blades were between 11.6~16.3 (average 13.8) cm, 4.6~6.3 (average 5.4) cm, $1.1{\sim}2.6(average\;1.86)g\;DW\;m^{-2}$, respectively. Photosynthetic pigment of Chl a concentration of Porphyra blades was between $2.18{\sim}17.77(average\;9.65)mg\;DW\;Chl\;a\;m^{-2}$. Carbon and nitrogen concentrations of Porphyra blades was between $201{\sim}317(average\;240)mg\;DW\;g^{-1}$, $39.8{\sim}50.0(average\;43.5)mg\;DW\;g^{-1}$ and C/N ratio 5.0~6.7 (average 5.5). The range of average ${\delta}^{13}C$ and ${\delta}^{15}N$ values of Porphyra blades was between - 25.6 to - 24.0 (average - 24.7)‰ for ${\delta}^{13}C$, and 1.3 to 4.1 (average 2.1)‰ for ${\delta}^{15}N$. Photosynthetic characteristics of seaweeds measured by pulse amplitude modulation (PAM) fluorometry was used as an indicator of photosynthetic activity. We use Diving-PAM fluorometry to examine photosynthetic rates of the seaweeds Porphyra yezoensis at each station. Maximum quantum yield of Porphyra blades was between 0.46~0.55 (average 0.52), the variance of the effective PS II maximum quantum yield of the station was broadly similar. Maximum relative electron transport rate (rETRmax) of Porphyra blades was between $4.71{\sim}5.84(average\;5.33){\mu}mol\;electrons\;m^{-2}\;s^{-1}$, the changes of maximum relative electron transport rate (rETRmax) of Porphyra yezoensis were similar to those of PS II maximum quantum yield. Photosynthetic efficiency (${\alpha}$) was between 0.027~0.045 (average 0.036). Minimum saturating irradiance ($E_k$) range was $139{\sim}180(average\;156){\mu}mol\;photons\;m^{-2}\;s^{-1}$. Minimum saturating irradiance ($E_k$) made a difference by station within the area on southwestern coast. Carbon and nitrogen concentrations and photosynthetic rates of Porphyra blades production areas on southwestern coast were broadly similar. The photosynthetic characteristics showed low photosynthetic rates because the low maximum quantum yields and low maximum relative electron transport rate.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.175-216
• /
• 2003

시각이 아닌 오감체계에 관계하는 때문에 현대미술은 외관만으로 이루어지지 않는다. 곧 예술 작품들은 하나의 장소를 관객에게 제공하여, 심리적, 물리적, 또는 예술이 존재여부에 관한 갖가지 질문들을 제기한다. 모든 예술 작품은 메시지를 담고 있다. 이러한 관점에서 개념 또는 아이디어에 우선하는 현대미술은 그들의 메시지를 전달하기 위해 우리의 사회적 배경과 보편성을 간과할 수 없다. 우리의 물체 인식은 결국 우리의 경험체계를 통해서 이루어진다고 간주하면, 현대미술의 새로운 형태는 보편적 특질들이 그 특질들 이상의 상태로 보여지도록 유도한다. 이러한 창조 행위의 시작은 현대인간의 문화 읽기이며 문화는 인간과 자연의 긴밀한 관계 속에서 이루어진다. 역사는 지나간 시간을 기록한 것이며, 이 또한 우리의 지식과 정보 체계에 속한다. 회화가 평면에 입체감을 표현하는 것과는 달리 조각은 자연 속, 즉 실재공간 속에 있는 모든 것을 표현하기 때문에 시각(visible) 이외에도 촉각(tangible)이 관여하게 된다. 조각의 특수성은 촉각(tangible)이 우선하는 것이다. 그러나 시각과 촉각은 매우 적극적으로 미학적 경험에 참여하는 감각으로 이들을 서로 분리하여 생각하기가 무척 힘들다. 왜냐하면 어떤 경험에 있어서 기억연합 또는 감각 연합에 의해 하나의 감각이 다른 여러 감각을 촉발하여 연쇄반응 혹은 '형태 Gestalt'를 이루기 때문이다. 대부분의 근대 조각 작품들은 조각대 위에 고정되어 있는 구상 형태를 지녔기 때문에 조각작품 자체가 지닌 외적 형태와 그 자체내의 공간이 더욱 중요한 역할을 하게 된다. 말하자면 미로의 비너스 조각은 대리석과 비너스 형태의 결합이다. 때문에 관객은 그 주변을 돌면서 우리 신체의 내적 공간과 시각에 의존하면서 그 작품의 중량감, 양감, 형태 등의 특질과 만나게 된다. 그러나 현대 추상조각과 개념조각은 이보다 좀 더 확장된 공간을 제시한다. 이것은 현대조각이 건축개념을 수용한 때문이며, 그것이 때로는 안 쪽에서 때로는 바깥 쪽에서 그 형태를 결정하며, 보고 듣고 느끼고 만져지고 왕래하는 등의 인식 영역인 관객의 오감체계에 직접적으로 관계하기 때문이다. 우리는 건축 공간에서, 시각 외에도 청각이나 촉각을 통해 지각한다. 대강 요약하자면 공간은 객관적 상태이기보다는 인식영역의 주관성을 통해 받아들여진 우리가 지나쳐온 것들이나 체험된 공간이다. 여기서 '받아들여지는' 일은 과거 경험들의 주체들, 언어와 문화에 의해서 이루어져야 한다. 건물, 즉 둘러싸고 있는 공간은 중앙이 아니다. 중앙은 바로 나, 둘러싸여진 나이다 나는 나의 동작에 따라 그 공간의 시스템을 변화시킬 수 있는 유동적인 중심이다 (이때의 나는 위치의 축을 변화시키는 것이 아니라, 그들을 탐색하는 것이다). 작품이 대형화되면서 이러한 건축공간개념이 현대 조각가들의 작품개념에 이용되었다고 본다. 현대미술에서 In situ작업과 특정한 장소를 위한 기획되어진 최근의 프로젝트 작업들은 대형화되어있으며, 건축에서처럼 특정한 장소를 만들어낸다. 로잘린드 크라우스(Rosalind Krauss)는 또한 '조각영역의 확장 (La sculpture dans le champ elargi)'에서 현대조각이 건축과 환경의 영역을 침범하고 있음을 지적한다. 그녀에 의하면, 1960년대 이후의 현대조각은 이러한 탈 귀속성과 조각의 자율성을 획득함으로써 조각은 건축물이 아니면서 건축물 주변에 위치하거나 풍경이 아니면서 풍경 안에 자리잡게 되었다. 이와 같이 현대의 대형조각 작품들 - 예를 들어 대형화된 미니별 조각이나 개념미술, 또는 대지예술 등 -은 풍경의 실재가 아니기 때문에 환경으로부터 구분된다고 언급하고 있다. 이들 조각은 더 이상 만져지는 실체이거나 점유하는 공간의 상징언어를 지닌 조각의 범주에 한정되지 않게 된다. 조각과 건축의 공간인식을 인체의 크기와 관련하여 보면, 메를로 퐁티(Merleau-Ponty)의 '지각의 현상학' 은 우리가 논하는 작품의 공간체계를 분석하는데 지침표가 되어준다. 메를로 퐁티가 말하는 지각은 정신에 의해서만 이루어지는 것이 아니며, 몸과 함께 이루어지는 현상이다. 지각은 우리가 부단히 눈을 움직이고 만지고 냄새를 맡고 주변을 돌아 다니면서 세계와의 직접적인 접촉을 통해 이루어 진다. 몸의 움직임을 통하여 나타나는 신체적 표현은 몸 자체가 원천적으로 지향적 활동의 주체로서 파악되는 한 이미 항상(恒常, constant) 의미 현상을 지니다. 우리의 지각이 움직이는 몸의 지향 활동을 통해 이루어진다는 것은 우리의 몸의 지향활동이 의식에 선행함을 의미한다. 몸의 움직임은 의식의 의도를 표현할 때에만 의미를 나타내는 기호가 되는 것이 아니라, 이미 그 자체가 살아있는 표현이다. 우리의 몸짓, 표정은 우리 의식이 의도하기 전에 이미 의미가 담겨있다. 몸은 그 자체가 기호(Signe)적이다. 결국. 메를로 퐁티에게서 세상(le monde entier)은 그 자신이 주체가 되어 인식한다, 그리고 이 인식 구조에는 우리의 몸이 구심점(le point centripete)이 된다. 만약 우리가 이러한 메를로 퐁티의 개념을 염두에 둔다면, 예술작품의 특성에 매우 중요한 역할을 하고 있는 재료와 크기를 이해할 수 있을 것이다.